Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PS9001-Y-F3-AX by Renesas Electronics is a single optocoupler with a max forward current of 0.025A and an isolation voltage of 5000V. It operates b/w -40 to 125 °C and has a data rate of 10 MBps, making it ideal for logic IC output applications requiring high-speed communication in various electronic circuits.
Median Price
$1.975
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.950
100+ parts
$1.001
1k+ parts
$0.778
10k+ parts
$0.718
Chip1Stop
$2.000
$1.070
$0.883
$0.789
Renesas
$2.160
$1.010
$0.809
$0.709
Flip Electronics (Authorized)
-
Verical
$1.440
$1.000
$0.931
Flip Electronics
Component Stockers USA
$1.840
$0.670
$0.550
Single configuration simplifies installation and reduces component count, making it easier to integrate into a system.
With a maximum forward current of 0.025 A, this optocoupler circuit output can handle moderate current loads.
Designed specifically for logic IC outputs, ensuring compatibility and reliable signal transmission.
Operates at a minimum supply voltage of 4.5 V, making it suitable for a wide range of applications.
With a high maximum operating temperature of 125°C, this optocoupler circuit output can withstand elevated temperatures without performance degradation.
Capable of operating in extremely cold conditions down to -40°C, ensuring reliability in harsh environments.
Nickel palladium gold terminal finish provides excellent conductivity and corrosion resistance for reliable connections.
Embossed packaging in 13-inch reels makes handling and storage more convenient, especially for automated assembly processes.
With a high maximum isolation voltage of 5000 V, this optocoupler circuit output ensures safe separation of circuits to prevent electrical interference.
Capable of transmitting data at a high nominal data rate of 10 MBps, making it ideal for high-speed communication applications.
Surface mounting feature simplifies installation and allows for compact and space-saving design layouts.
Can handle a maximum on-state current of 0.02 A, ensuring reliable performance under a variety of load conditions.
Optocoupler Circuit Outputs PS9001-Y-F3-AX attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Renesas Electronics
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Supply Voltage:
Terminal Finish:
PS9001-Y-F3-AX Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Lite-on Semiconductor
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Intersil
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
FOD8342TR2
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Functions: 1; No. of Elements: 1; Maximum Forward Current: .025 A;
6N139
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .012 A; Maximum On State Current: .06 A; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; JESD-609 Code: e0;
6N136
Morrihan International
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Maximum On State Current: .01 A; Nominal Response Time: 30 ns;
HCPL-0630-000E
Broadcom
Broadcom's HCPL-0630-000E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers high isolation voltage of 3750V and fast response time of 75ns.
6N136S
The Onsemi 6N136S is a single optocoupler with a max forward current of 0.025A and isolation voltage of 2500V. It has a nominal response time of 450ns, making it ideal for logic IC output applications. With a data rate of 1MBps, this rectangular-shaped optocoupler operates b/w 0 to 70°C temperature range.
6N136SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Additional Features: TTL COMPATIBLE, UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
FODM452
The Onsemi FODM452 is a single optocoupler with a max forward current of 0.025A and logic IC output type. It operates b/w -40 to 85°C, offers 3750V isolation voltage, and has a data rate of 1MBps. Ideal for surface mount applications requiring high isolation and low power dissipation.
6N137M
Lite-on Technology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Additional Features: CMOS COMPATIBLE, UL APPROVED, CAN ALSO OPERATE ON 5V; Configuration: SINGLE;
H11L1SMT&R
Isocom Components
H11L1SMT&R by Isocom Components is a single optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a data rate of 1MBps.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; No. of Elements: 1; No. of Functions: 1;
HCPL2630M
LOGIC IC OUTPUT OPTOCOUPLER; Configuration: SEPARATE, 2 CHANNELS; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; No. of Elements: 2; Maximum Forward Current: .05 A; No. of Functions: 2;
HCPL-2631-500E
Broadcom's HCPL-2631-500E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 3750V and data rate of 10MBps.
HCPL2731M
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .02 A;
HCPL-0630-500E
Broadcom's HCPL-0630-500E is a 2-channel logic IC output optocoupler with separate configuration. It operates at -40 to 85°C, with max isolation voltage of 3750V and nominal data rate of 10MBps. Ideal for applications requiring high-speed signal isolation in electronics and communication systems.
Rs Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SINGLE; No. of Elements: 1; Maximum Response Time: .0000008 s; Shape: RECTANGULAR;
HCPL3700SDV
HCPL3700SDV by Onsemi is a Logic IC Output Optocoupler with a max forward current of 0.05A and isolation voltage of 2500V. It operates b/w temperatures of 0 to 70°C, has a response time of 40000ns, and requires a nominal voltage of 5V. Ideal for applications requiring surface mounting features in optocoupler circuit outputs.
HCPL2731
The Texas Instruments HCPL2731 is a 2-channel optocoupler with built-in resistor, offering a max forward current of 0.02A and isolation voltage of 3000V. Ideal for logic IC output applications, it operates b/w 0-70°C with a nominal data rate of 0.1MBps and max on-state current of 0.06A.
MID400S
The Onsemi MID400S is a single optocoupler with a max forward current of 0.03A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with matte tin terminal finish and surface mounting feature.
HCPL-3120-300E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 15 V; Maximum Power Dissipation: .25 W; Nominal Response Time: 500 ns;
HCPL-2731-300E
Broadcom's HCPL-2731-300E is a 2-channel logic IC output optocoupler with 400% min. current transfer ratio and 3750V max. isolation voltage. Ideal for applications requiring separate configuration, such as industrial automation systems or power supply circuits. Operating temp range: 0 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PS9013-Y-V-AX
Renesas Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e4; No. of Elements: 1;
PS9009-Y-V-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Minimum Supply Voltage: 4.5 V; Packing Method: TAPE; Maximum Forward Current: .025 A;
PS9009
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .025 A; No. of Elements: 1; No. of Functions: 1;
PS9013-Y-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; No. of Elements: 1; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
PS9013
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Packing Method: TAPE; No. of Elements: 1; Minimum Supply Voltage: 4.5 V;
PS9009-Y-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Operating Temperature: 125 Cel; Maximum Forward Current: .025 A; Additional Features: UL APPROVED, OPEN COLLECTOR;
PS9013-Y-V-F3-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE;
PS9009-Y-V-F3-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; No. of Elements: 1; Minimum Supply Voltage: 4.5 V; Nominal Response Time: 25 ns;
PS9009-F3
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED, 13 INCH; Maximum Forward Current: .025 A; No. of Functions: 1; Maximum Isolation Voltage: 5000 V;
PS9013-V-F3
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Minimum Supply Voltage: 4.5 V; Packing Method: TR, EMBOSSED, 13 INCH; No. of Functions: 1;
PS9013-F3
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: UL APPROVED; Configuration: SINGLE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
PS9009-V-F3
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Packing Method: TR, EMBOSSED, 13 INCH; Nominal Response Time: 25 ns; Maximum Operating Temperature: 125 Cel;
PS9013-Y-F3-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Minimum Operating Temperature: -40 Cel; Nominal Data Rate: 1 MBps; JESD-609 Code: e4;
PS9001-Y-V-F3-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Operating Temperature: 125 Cel; Maximum On State Current: .02 A; Nominal Data Rate: 10 MBps;
PS9009-Y-F3-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum On State Current: .025 A; No. of Elements: 1; Minimum Supply Voltage: 4.5 V;
PS9001-Y-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Forward Current: .025 A; JESD-609 Code: e4; Minimum Supply Voltage: 4.5 V;
PS9001-Y-V-AX
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD; Packing Method: TAPE; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 125 Cel;
PS9009-V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Nominal Response Time: 25 ns; No. of Elements: 1; Minimum Operating Temperature: -40 Cel;
PS9013-V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Additional Features: UL APPROVED, VDE APPROVED; Minimum Operating Temperature: -40 Cel; Packing Method: TAPE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved