Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Supply Digital
1+ parts
100+ parts
1k+ parts
10k+ parts
Multiplexers & Switches ISL71841SEHVF attributes and parameters. Explore more Multiplexers & Switches devices from Renesas Electronics
Additional Features:
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Total Dose (V):
Width (mm):
ISL71841SEHVF Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
Telefunken Microelectronics
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Goodwork Semiconductor
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
74LVC1G3157GW,125
NXP Semiconductors
NXP Semiconductors' 74LVC1G3157GW,125 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and low power consumption.
TS5A3159DBVRE4
Texas Instruments
TS5A3159DBVRE4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 3.2 ohm and fast switching times of 70-95 ns. Ideal for industrial applications requiring high isolation and low power consumption.
77052012X
Analog Devices
Analog Devices 77052012X is a CMOS single-ended multiplexer with 8 channels. It operates b/w -55 to 125 °C and has a max supply voltage of 16.5 V. With a package style of chip carrier, it is ideal for military-grade applications requiring fast switching times and low on-state resistance.
DG412DY-E3
Vishay Intertechnology
DG412DY-E3 by Vishay Intertechnology is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp, and 35 ohm on-state resistance. It's used in industrial applications requiring separate outputs, with a max seated height of 1.75mm and switching time of 220ns for precise signal control.
7705203EA
Maxim Integrated
Maxim Integrated's 7705203EA is a CMOS single-ended multiplexer with 8 channels, on-state resistance of 1800 ohm, and max supply current of 2 mA. It operates in military-grade temperature range from -55 to 125 °C and has a switching time of 1500 ns. Ideal for applications requiring high precision signal routing in harsh environments.
TS3USB221RSER
TS3USB221RSER by Texas Instruments is a 10-terminal chip carrier switch with 2.5V nominal voltage, 6 ohm max on-state resistance, and 1100 kHz nominal bandwidth. Ideal for industrial applications requiring a compact, low-power differential multiplexer with break-before-make switching capability.
CD4066BE
Harris Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG403DYZ-T
Intersil
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG508AKRZ-REEL7
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG508ACJ+
Analog Devices' DG508ACJ+ is a CMOS multiplexer with 8 channels, 450 ohm max on-state resistance, and 68 dB nominal off-state isolation. It operates at -15V to +18V supply voltage range and is ideal for commercial temperature grade applications requiring precise signal switching in electronic circuits.
74HC4051DB,112
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MUX36S16IPWR
MUX36S16IPWR by Texas Instruments is a CMOS single-ended multiplexer with 28 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 430 ohm and nominal bandwidth of 500 kHz. Ideal for automotive applications due to its small outline package and low supply voltage requirements.
DG408DY-E3
DG408DY-E3 by Vishay Intertechnology is a CMOS single-ended multiplexer with 8 channels. It operates at industrial temperature grade, with a max supply voltage of 20V and on-state resistance of 100 ohm. Ideal for applications requiring high-speed switching and low power consumption in compact designs.
MAX14778ETP+T
Analog Devices' MAX14778ETP+T is a BICMOS technology-based single-ended multiplexer with 4 channels, 2 functions, and 80 dB off-state isolation. It operates b/w -40 to 85 °C with a supply voltage range of 3-5.5 V, making it ideal for industrial applications requiring high-speed switching in compact spaces.
MAX14662ETI+
MAX14662ETI+ by Analog Devices is a 28-terminal SPST multiplexer with a 1 ohm Ron, suitable for industrial applications. It operates b/w -40 to 85 °C with Vsup ranging from 1.6V to 5.5V. With a 0.4mm terminal pitch and 0.8mm seated height, it offers high isolation of 40dB and low on-state resistance match of 0.02 ohm.
MAX333ACPP+
MAX333ACPP+ by Analog Devices is a CMOS SPDT multiplexer with 4 functions, operating at -20V to 20V. It has a max on-state resistance of 45 ohm and offers 72dB off-state isolation. Ideal for commercial applications requiring fast switching times and precise signal routing in a compact IN-LINE package.
DG442DY-E3
Vishay Intertechnology's DG442DY-E3 is a CMOS SPST switch with 4 functions, -40 to 85 °C operating temp range, and 16 terminals. With a max on-state resistance of 85 ohm and switching voltage of +-15 V, it suits industrial applications requiring high isolation (60 dB) and fast response times (250 ns).
FSUSB30MUX
FSUSB30MUX by Onsemi is a 10-terminal DPDT multiplexer with 3.3V supply voltage, 1.1mm seated height, and 30dB off-state isolation. It features separate outputs, industrial temperature grade, and break-before-make switching for applications requiring high-speed signal routing in compact spaces.
MAX14777GTP+
MAX14777GTP+ by Analog Devices is a 4-function multiplexer with 20 terminals, operating b/w -40 to 105°C. It features a max on-state resistance of 10 ohm and nominal off-state isolation of 66 dB. Ideal for industrial applications requiring precise signal switching in compact spaces.
ADG619BRTZ-REEL7
ADG619BRTZ-REEL7 by Analog Devices is an 8-terminal SPDT CMOS switch with a max on-state resistance of 6.5 ohm and common output. It operates at industrial temperature grades from -40 to 85 °C, making it suitable for applications requiring low-profile switches with high isolation levels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ISL71840SEHF/PROTO
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DFP; Package Shape: RECTANGULAR; Surface Mount: YES;
Renesas Electronics
ISL71830SEHVF
ISL71831SEHX/SAMPLE
SINGLE-ENDED MULTIPLEXER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Finish: NOT APPLICABLE;
ISL71841SEHF/PROTO
SINGLE-ENDED MULTIPLEXER; JESD-609 Code: e4; Terminal Finish: GOLD;
ISL71831SEHVF
ISL71841SEHVL
SINGLE-ENDED MULTIPLEXER;
ISL71030MNZ-T
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 32; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES;
ISL71830SEHVX
SINGLE-ENDED MULTIPLEXER; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
ISL71840SEHX/SAMPLE
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 26; Package Code: DIE; Package Shape: RECTANGULAR; Surface Mount: YES;
ISL71840SEHVF
ISL71831SEHF/PROTO
SINGLE-ENDED MULTIPLEXER; Terminal Finish: GOLD; JESD-609 Code: e4;
ISL71841SEHL/PROTO
ISL71830SEHF/PROTO
ISL71831SEHVX
ISL71030MNZ
ISL71030MNZ-T7A
ISL71830SEHX/SAMPLE
SINGLE-ENDED MULTIPLEXER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
ISL71840SEHVX
ISL71841SEHVF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved