Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DG411DYZ by Renesas Electronics is a CMOS multiplexer with 4 functions and 1 channel. It has a max on-state resistance of 35 ohm and offers a nominal off-state isolation of 68 dB. This small outline package is suitable for industrial applications requiring temperature grades up to 85°C.
Median Price
$2.660
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Rochester
1+ parts
$1.430
100+ parts
$1.400
1k+ parts
$1.370
10k+ parts
-
Farnell
$1.590
$1.080
$0.869
$0.817
Chip1Stop
$2.650
$1.600
$1.350
$1.320
Mouser Electronics
$1.630
$1.420
DigiKey
$1.623
$1.439
$1.357
Renesas
$2.700
$1.989
$1.428
$1.306
Newark
$2.740
$1.670
$1.580
Element14
$3.780
$2.320
$1.970
$1.960
Adafruit Industries
$9.664
$9.181
Verical
$1.790
Nova Conductors
$1.640
Semtec, LLC
Vyrian
NAC Semi
$2.120
Resion
Huijzer Components
North Shore Components
LWI Electronics Inc
Ampacity Inc.
$1.220
Semicontronic
$1.190
$1.183
Continental Prestige Electronics
Aranea Global
$1.607
$1.543
Argo Parts USA
$1.610
Aztec Data Supply Inc.
$7.380
Advanced Electronics
Microchip USA
$17.940
Corohmni
$23.394
Perfect Parts
A-Z Elektronik GmbH
Alle Elektronik GmbH
Supply Digital
Authorized Procurement Solutions
Kepictronics
Eastek
This material provides durability and protection to the internal components of the multiplexer, ensuring a longer lifespan.
Being surface mountable makes installation easier and saves space on the PCB, making it suitable for compact designs.
Having multiple functions in one device increases efficiency and reduces the need for additional components in the circuit.
Operating at a nominal voltage of 15V ensures stable performance and compatibility with standard power sources.
With a high maximum operating temperature, this multiplexer can withstand harsh environmental conditions and extended use.
Using CMOS technology ensures low power consumption and high-speed operation, enhancing the overall performance of the multiplexer.
Multiplexers & Switches DG411DYZ attributes and parameters. Explore more Multiplexers & Switches devices from Renesas Electronics
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
DG411DYZ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Temic Semiconductors
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Sangdest Microelectronics (Nanjing)
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
M39029/56-351
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
ADG426BRSZ
Analog Devices
ADG426BRSZ by Analog Devices is a 16-channel single-ended multiplexer with a max on-state resistance of 80 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a switching time of 150 ns. Ideal for applications requiring high channel count and precise signal routing.
7705201EA
Maxim Integrated
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG508AKRZ-REEL7
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052D-Q100,118
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
5962-89710013X
Analog Devices' 5962-89710013X is a MIL-STD-883 compliant CMOS multiplexer with 16 channels, 450 ohm Ron, and 300 ns switch times. Ideal for military applications requiring high isolation (68 dB) and low resistance match (5 ohm) in harsh environments.
74LVC1G3157GW,125
NXP Semiconductors
NXP Semiconductors' 74LVC1G3157GW,125 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and low power consumption.
ADG1604BRUZ-REEL7
ADG1604BRUZ-REEL7 by Analog Devices is a 14-terminal CMOS multiplexer with 4 channels. It operates at a supply voltage range of 3.3V to 8V and offers a max on-state resistance of 1.2 ohm, making it ideal for automotive applications requiring precise signal switching in compact spaces.
TS5A3159DBVRE4
Texas Instruments
TS5A3159DBVRE4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 3.2 ohm and fast switching times of 70-95 ns. Ideal for industrial applications requiring high isolation and low power consumption.
DG419DY
The Vishay Intertechnology DG419DY is a SPDT CMOS switch with 35 ohm Ron. It operates at -40 to 85 °C, with Vsup of +/-15V and 250ns switch-on time. Ideal for industrial applications requiring fast switching in compact designs.
NC7SB3157P6X-F40
Multiplexers or Switches; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
ADG709BRUZ-REEL7
ADG709BRUZ-REEL7 by Analog Devices is a 16-terminal CMOS multiplexer with a max on-state resistance of 4.5 ohm and switching type BREAK-BEFORE-MAKE. It operates in automotive-grade temperatures, -40 to 125 °C, making it suitable for differential multiplexing applications requiring high isolation and low resistance.
CD4052BPWRG3
CD4052BPWRG3 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at -55 to 125°C. It has a max on-state resistance of 1050 ohm and a nominal bandwidth of 25 kHz. Ideal for military-grade applications requiring separate outputs and low signal current consumption.
CD4051BQPWRG4Q1
CD4051BQPWRG4Q1 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -40 to 125 °C and has a max on-state resistance of 1050 ohm. Ideal for automotive applications, it features a nominal bandwidth of 20 kHz and can handle supply voltages ranging from -2.5V to 10V.
TS3USB221DRCR
TS3USB221DRCR by Texas Instruments is a 10-terminal differential multiplexer with a supply voltage range of 2.3V to 3.6V, offering separate output and low on-state resistance of 6 ohm. With a bandwidth of 1100 kHz, it is ideal for industrial applications requiring fast switching times and high isolation levels.
7705203EA
Maxim Integrated's 7705203EA is a CMOS single-ended multiplexer with 8 channels, on-state resistance of 1800 ohm, and max supply current of 2 mA. It operates in military-grade temperature range from -55 to 125 °C and has a switching time of 1500 ns. Ideal for applications requiring high precision signal routing in harsh environments.
ADG1436YRUZ
ADG1436YRUZ by Analog Devices is a 16-terminal SPDT multiplexer with 2 functions. Operating at -40 to 125 °C, it has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching times and high isolation levels.
NLAS4599DTT1G
NLAS4599DTT1G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and nominal off-state isolation of 93 dB. Ideal for military-grade applications requiring fast switching times and low resistance in a compact package.
ADG5436FBRUZ
ADG5436FBRUZ by Analog Devices is a multiplexer/switch with 2 functions. It has a small outline, thin profile package style and operates at temperatures ranging from -40 to 125 °C. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
NC7SZ66M5X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4066BM
CD4066BM by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm Ron, and 40 kHz bandwidth. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high signal current in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DG419DY-T1-E3
Vishay Intertechnology's DG419DY-T1-E3 is a SPDT switch with 35 ohm Ron, 250 ns switch-on time, and -40 to 85 °C operating temp. Ideal for industrial applications requiring fast switching and low on-state resistance in compact designs. With a small outline package and dual terminals, it suits various multiplexing needs.
DG411DY-T1-E3
Vishay Intertechnology's DG411DY-T1-E3 is a CMOS SPST multiplexer with 4 functions, 35 ohm Ron, and 220 ns switch-on time. Ideal for industrial applications requiring separate output voltages up to +-15 V, it operates b/w -40 to 85 °C with a max seated height of 1.75 mm.
DG419DY-E3
Vishay Intertechnology's DG419DY-E3 is a SPDT switch with 35 ohm Ron, 250 ns max switch-on time, and -40 to 85°C operating temp. Ideal for industrial applications requiring fast switching at +/-15 V supplies in a compact SMD package.
DG411DYZ-T
Intersil
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Renesas Electronics
Renesas Electronics' DG411DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. It operates in industrial temperatures from -40 to 85 °C and has a small outline package for applications requiring high isolation at nominal voltage of +/-15 V.
DG412DYZ
The Renesas Electronics DG412DYZ is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for various applications requiring signal switching in electronic circuits.
DG412DYZ-T
Renesas Electronics' DG412DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
DG411DY-E3
Vishay Intertechnology's DG411DY-E3 is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 220 ns switch-on time. Ideal for industrial applications, it operates b/w -40 to 85°C with a peak reflow temperature of 260°C. This small outline package has separate outputs and offers 68 dB isolation at ±15 V supplies.
DG419DY+
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Siliconix
Analog Devices' DG419DY+ is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm and switching voltage of +-15V. Ideal for industrial applications, it operates b/w -40 to 85°C, has a peak reflow temp of 260°C, and offers break-before-make switching.
DG412DY-T1-E3
DG412DY-E3
DG419DJ-E3
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved