Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Raltron Electronics' RH100-12.000-9-1515-TR crystal oscillator offers 15 ppm frequency tolerance and stability, with a series resistance of 100 ohm. Ideal for applications requiring precise timing at 12 MHz, such as telecommunications equipment and industrial automation systems.
Median Price
$0.120
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.132
Vyrian
Kruse Electronics AG
Argo Parts USA
$0.128
Netroflash
Continental Prestige Electronics
$0.130
Provides precise frequency control, ensuring accurate performance.
Maintains stable output frequency over a wide range of operating conditions.
Helps in reducing power consumption and enhancing efficiency.
Enables reliable operation in cold environments.
Provides excellent conductivity and corrosion resistance.
Ensures stable oscillation and reliable performance.
Suitable for various applications requiring this frequency range.
Ensures long-term stability and accuracy of the oscillator.
Matches the requirements of the circuit for optimal performance.
Allows for easy and secure installation on PCBs.
Provides sufficient power for reliable operation.
Compact size for space-constrained applications.
Can withstand high temperatures, ensuring durability and reliability.
Crystal Oscillators RH100-12.000-9-1515-TR attributes and parameters. Explore more Crystal Oscillators devices from Raltron Electronics
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
Founded in Miami, Fl. in 1983, Raltron Electronics Corporation has grown to become one of the most recognized and experienced manufacturers of frequency management products in the world. From simple tuning fork crystals to high stability oven-controlled crystal oscillators, Raltron offers the most comprehensive line of frequency management devices in the industry. The company’s commitment to research and development has allowed the continuous creation of leading edge crystal and oscillators devices and technologies over many years. Today, Raltron provides high performance frequency control solutions that meet and exceed customer expectations in terms of price, quality, application and customer support. To satisfy the demands of the fast-growing wireless applications markets Raltron has also positioned itself as a complete solution supplier, adding SAW devices and LTCC filters to its crystals and oscillators offering. The company has also developed a complete product range of antennas for the same markets.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Philips Components
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
Yangzhou Yangjie Electronics
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
NXP Semiconductors
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
445I23D25M00000
Cts
CTS 445I23D25M00000 crystal oscillator offers 20 ppm frequency tolerance, 30% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at a nominal frequency of 25 MHz in a compact surface-mount package.
FA-238V12.0000MB-K3
Seiko Epson
FA-238V12.0000MB-K3 by Seiko Epson is a crystal oscillator with 12 MHz nominal frequency, 50 ppm tolerance, and 30% stability. It is ideal for applications requiring precise timing in electronics due to its small size (3.2mm x 2.5mm x 0.7mm) and surface mount feature, operating b/w -20°C to 70°C efficiently.
ABM8-25.000MHZ-D2X-T
Abracon
ABM8-25.000MHZ-D2X-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type. Suitable for surface mounting, it has a compact size of L3.2XB2.5XH0.8 (mm).
CS325S25000000ABJT
Citizen Finedevice
CS325S25000000ABJT by Citizen Finedevice is a crystal oscillator with 25 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in electronics due to its high accuracy and low aging rate of 5 PPM/first year.
LFXTAL003068
Iqd Frequency Products
Quartz Crystals;
9HT11-32.768KDZF-T
Txc
9HT11-32.768KDZF-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 90000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in temperature-sensitive environments. With a compact size of L2.0XB1.2XH0.6 (mm), it's suitable for surface mount installations in various electronic devices.
AB15T-32.768KHZ
AB15T-32.768KHZ by Abracon is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40000 ohm series resistance. Ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in automotive systems.
ABL-4.000MHZ-B2
Abracon's ABL-4.000MHZ-B2 crystal oscillator offers 20 ppm frequency tolerance, 50% stability, and 180 ohm series resistance. Ideal for applications requiring a reliable 4 MHz signal with -20 to 70°C operating range. Through-hole mount design with bright tin finish ensures durability in various environments.
ABLS-12.000MHZ-B-2-T
ABLS-12.000MHZ-B-2-T by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and electronic devices.
CM315D32768EZFT
Citizen Finedevice's CM315D32768EZFT crystal oscillator offers 10 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
FC-13532.7680KA-A
Seiko Epson's FC-13532.7680KA-A crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
403I35D18M43200
Cts 403I35D18M43200 crystal oscillator offers 18.432 MHz frequency with 30 ppm tolerance and 50% stability. Ideal for applications requiring precise timing in a compact surface-mount design, operating b/w -40°C to 85°C with low aging at 3 PPM/year.
ATS120BSM-1E
Cts ATS120BSM-1E crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a 12 MHz nominal operating frequency in a compact surface mount package.
ECS-160-20-4X
Ecs International
ECS-160-20-4X by Ecs International is a crystal oscillator with 16 MHz nominal frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in electronics due to its through-hole mounting feature and low aging rate of 5 PPM/yr.
NX3225SA-16.000M-STD-CRS-2
Nihon Dempa Kogyo
NX3225SA-16.000M-STD-CRS-2 by Nihon Dempa Kogyo is a 16 MHz crystal oscillator with 15 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 125 °C, featuring gold terminal finish and parallel fundamental type.
ABM7-12.0000MHZ-D-2-Y-T
ABM7-12.0000MHZ-D-2-Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems.
ABL-11.0592MHZ-B2
ABL-11.0592MHZ-B2 by Abracon is a 11.0592 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70°C with a drive level of 100 uW.
ABM11-25.000MHZ-D2X-T3
ABM11-25.000MHZ-D2X-T3 by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.
CM200C32.768KDZF-UT
CM200C32.768KDZF-UT by Citizen Finedevice is a crystal oscillator with 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as precision timing in temperature ranges from -40 to 85 °C. It features surface mounting and compact dimensions of L7.9XB3.7XH2.4 (mm).
403C11A12M00000
Cts 403C11A12M00000 crystal oscillator offers 10 ppm frequency tolerance and 10% stability. With a nominal frequency of 12 MHz, it's ideal for applications requiring precise timing in electronics. This surface-mount device operates b/w -20°C to 70°C, making it versatile for various temperature conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RH100-12.000-10-2020-EXT-TR
Raltron Electronics
Raltron Electronics' RH100-12.000-10-2020-EXT-TR crystal oscillator offers 20 ppm frequency tolerance, 20% stability, and 100 ohm series resistance. Ideal for applications requiring a 12 MHz operating frequency, such as telecommunications equipment and industrial automation systems.
RH100-12.000-18-2030-EXT-TR
Raltron Electronics' RH100-12.000-18-2030-EXT-TR is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability, suitable for applications requiring precise timing such as telecommunications equipment and industrial automation systems.
RH100-12.000-18-2020-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 2 PPM/FIRST YEAR; Terminal Finish: Gold (Au) - electroplated; Minimum Operating Temperature: -20 Cel;
RH100-12.000-20-2030-TR
RH100-12.000-20-2030-TR by Raltron Electronics is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 30%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
RH100-25.000-12-F-1010-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 5 PPM/YEAR; Physical Dimension: 3.2mm x 2.5mm x 0.7mm; Load Capacitance: 12 pF;
RH100-24.000-10-1010-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Physical Dimension: 3.2mm x 2.5mm x 0.7mm; Nominal Operating Frequency: 24 MHz;
RH100-25.000-16-F-2020-EXT-TR
RH100-25.000-16-F-2020-EXT-TR by Raltron Electronics is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high reliability.
RH100-8.000-10-1010-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/YEAR; Maximum Operating Temperature: 85 Cel; Load Capacitance: 10 pF;
RH100-12.000-12-1010-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Series Resistance: 100 ohm; Maximum Operating Temperature: 85 Cel;
RH100-16.000-10-1010-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Nominal Operating Frequency: 16 MHz; Drive Level: 200 uW;
RH100-16.000-16-3030-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 2 PPM/YEAR; Frequency Stability: 30 %; Load Capacitance: 16 pF;
RH100-19.200-12-1010-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Terminal Finish: Gold (Au) - electroplated; Load Capacitance: 8 pF;
RH100-24.000-12-3030-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12 pF; Physical Dimension: 3.2mm x 2.5mm x 0.7mm;
RH100-24.000-9-1010-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/YEAR; JESD-609 Code: e4; Terminal Finish: Gold (Au) - electroplated;
RH100-24.000-9-1015-EXT-TR
Raltron Electronics' RH100-24.000-9-1015-EXT-TR crystal oscillator offers 10 ppm frequency tolerance, 15% stability, and 60 ohm series resistance. Ideal for applications requiring a 24 MHz operating frequency, such as IoT devices and communication systems. With gold terminal finish and compact dimensions of 3.2mm x 2.5mm x 0.7mm, it ensures reliable performance in temperatures ranging from -40 to 85°C.
RH100-32.000-16-F-1015-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/YEAR; Terminal Finish: Gold (Au) - electroplated; Series Resistance: 60 ohm;
RH100-40.000-18-F-2050-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 2 PPM/YEAR; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 70 Cel;
RH100-25.000-18-F-2030-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 2 PPM/YEAR; Terminal Finish: GOLD; Series Resistance: 60 ohm;
RH100-48.000-8-F-1015-EXT-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/YEAR; Physical Dimension: 3.2mm x 2.5mm x 0.7mm; Series Resistance: 60 ohm;
RH100-12.000-9-1015-TR-NS1
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/YEAR; Drive Level: 100 uW; Minimum Operating Temperature: -20 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved