Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Radiall S A's R114.239.000 SSMB Connector features 0.5 dB Insertion Loss, Gold Termination Contact Finish, and SNAP Coupling Type. With 50 ohm Impedance and 4 GHz Frequency, it is ideal for RF applications requiring high-quality signal transmission in a compact design.
Median Price
$9.270
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
LIBRA Elektronik GmbH
Continental Prestige Electronics
$7.950
$7.791
AZTECH Wire
$18.425
Argo Parts USA
Low insertion loss ensures minimal signal loss, making this connector ideal for high-frequency applications.
Gold contact finish provides excellent conductivity and corrosion resistance, ensuring reliable performance over time.
The snap coupling mechanism allows for quick and easy connection, saving time during installations or repairs.
PTFE insulator material offers high dielectric strength and temperature resistance, ideal for demanding environments.
This RF SMB connector is versatile and widely used in various applications for its compact size and efficient performance.
A VSWR of 1.41 indicates good impedance matching and minimal signal reflection, ensuring optimal signal transmission.
Designed for cable mounting, this connector offers flexibility and convenience for different installation configurations.
The 50 ohm impedance is standard for RF applications, ensuring compatibility with a wide range of equipment.
Crimp termination allows for secure and reliable connections, ideal for applications requiring rugged and durable connections.
Female gender connectors are commonly used for their versatility and compatibility with various mating connectors.
The jack body style provides a secure and stable connection, making this connector suitable for high-vibration environments.
Straight mounting style offers a simple and easy connection, making it suitable for applications where space is limited.
With a maximum operating frequency of 4 GHz, this connector is suitable for high-frequency applications requiring robust performance.
SSMB Connectors R114.239.000 attributes and parameters. Explore more SSMB Connectors devices from Radiall S A
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
R114.239.000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1554216004
Molex
WIRE AND CABLE;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
131-1402-101
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Manufacturer Series: SMB;
SMB7H-J-P-H-RA-TH1
Samtec
Samtec's SMB7H-J-P-H-RA-TH1 is a RF SMB connector with gold over nickel finish, snap coupling type, and PTFE insulator. Ideal for applications requiring 75 ohm impedance, it operates b/w -65 to 165 °C with VSWR of 1.3 up to 4 GHz frequency on board mounting in right angle configuration.
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); MIL Conformity: NO; Termination Contact Finish: GOLD (30);
131-3701-411
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
73100-0257
The Molex 73100-0257 is a RF SMB connector with 50 ohm impedance, gold shell finish, and PTFE insulator. It operates b/w -55 to 155 °C, withstands up to 1050VAC, and has a VSWR of 1.3. Ideal for commercial applications requiring durable connectors with high insulation resistance and crimp termination.
1060464-1
TE Connectivity
TE Connectivity's 1060464-1 SSMB Connector features a body size of 0.25" x 0.25" x 0.525", PTFE insulation, and gold shell finish. Ideal for RF applications with a characteristic impedance of 50 ohm, operating up to 4 GHz. Suitable for commercial use with durability of 500 cycles in board mounting configurations.
R117.186.807
Radiall S A
Radiall S A's R117.186.807 SSMB Connector features 1dB insertion loss, 1000VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4GHz with RG-316 cables, this connector has a snap coupling type and gold over nickel finish for durability in temperatures ranging from -35 to 125°C.
414002-8
TE Connectivity 414002-8 is a SSMB connector with 0.25" body diameter, 0.3 dB insertion loss, and 1000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and operates b/w -65 to 85 °C.
1-1337476-0
TE Connectivity 1-1337476-0 is a SSMB Connector with threaded coupling, PTFE insulator, and gold shell finish. It operates b/w -65 to 165 °C and has a max frequency of 4 GHz. Ideal for RF applications requiring a male jack connector with 50 ohm impedance.
R114.186.000
The Radiall S A R114.186.000 SSMB Connector features 1 dB insertion loss, 1000VAC dielectric voltage, and 50 ohm impedance for RF applications up to 4 GHz. With a gold over nickel finish and PTFE insulator, it is ideal for commercial use in cables with RG-179 type connectors requiring male contact gender and crimp termination. Operating temperatures range from -65 to 165°C with durability of 500 cycles.
2FA1-NCSJ-C01-0
Amphenol
Amphenol 2FA1-NCSJ-C01-0 SSMB Connector has 0.3 dB Insertion Loss, 1131VAC Dielectric Withstanding Voltage, and 50 ohm Characteristic Impedance. Ideal for RF applications up to 4 GHz with RG-174, RG-188, or RG-316 cables due to its FEMALE JACK design and SNAP coupling type. Operating temperature range from -40°C to 115°C ensures durability in various environments.
131-3701-261
Bel Fuse
Bel Fuse 131-3701-261 is a RF SMB connector with 50 ohm impedance, POLYTETRAFLUOROETHYLENE insulator, and 1400VAC dielectric voltage. Ideal for commercial applications requiring durable connectors with -65 to 165 °C operating range and 4 GHz frequency support.
FA1-NBSJ-C04-0
RF SMB CONNECTOR; Manufacturer Series: FA1;
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE; JESD-609 Code: e4; Mounting Type: BOARD;
SMB1252B1-3GT30G-50
Amphenol SMB1252B1-3GT30G-50 is an RF SMB connector with gold over nickel finish. It features snap coupling, PTFE insulator, and solder termination. Ideal for board mounting applications requiring male contact gender in a right-angle jack configuration.
1-2345654-3
TE Connectivity 1-2345654-3 is a SSMB Connector with dimensions 1.079"x.386"x.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting applications.
142252
Amphenol 142252 is an RF SMB connector with gold finish, snap coupling, and PTFE insulator. Ideal for cable mounting with crimp solder termination, male contact gender, and right angle mounting style. Perfect for applications requiring reliable RF connections in compact spaces.
R114.665.000
Radiall S A R114.665.000 is a RF SMB Connector with 50 ohm impedance, gold-plated contacts, and PTFE insulator for high durability. Ideal for applications requiring panel mounting, withstanding voltage up to 1400VAC, and operating temperatures from -65 to 165°C.
5415006-1
TE Connectivity 5415006-1 is an RF SMB connector with 50 ohm impedance, 0.3 dB insertion loss, and 1.25 VSWR. Ideal for commercial applications, it has a durability of 500 cycles and operates b/w -65 to 165°C.
R114005000
The Radiall S A R114005000 SSMB Connector features low insertion loss of 0.05 dB and gold termination contact finish. With MIL and IEC conformity, it has a snap coupling type for RF SMB applications up to 4 GHz frequency range. Ideal for cable mounting with 50 ohm impedance, this female plug connector offers reliable performance in various RF systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R114426000W
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; MIL Conformity: YES; Mounting Style: STRAIGHT;
R114.426.000
Radiall S A's R114.426.000 SSMB Connector features 0.06 dB insertion loss, 1.08 VSWR, and 50 ohm impedance for up to 4 GHz applications. With gold over nickel termination, this RF SMB connector is ideal for board and panel mounting with a snap coupling type.
R114426000
The Radiall S A R114426000 is a RF SMB Connector with 50 ohm impedance, 0.06 dB insertion loss, and 1.08 VSWR. It is used in applications requiring high durability, such as in board and panel mounting for up to 4 GHz frequency operations.
R114239000
The Radiall S A R114239000 RF SMB Connector features low insertion loss of 0.05 dB, gold termination contact finish, and 50 ohm characteristic impedance. Ideal for applications requiring high frequency up to 4 GHz, such as military and industrial communication systems.
R114205000
The Radiall S A R114205000 RF SMB Connector has low insertion loss of 0.05 dB and high VSWR of 1.35, suitable for up to 4 GHz frequency applications. With gold termination finish and MIL/IEC conformity, it is ideal for 50 ohm cable connections requiring snap coupling in RF systems.
R114.205.000
R114.205.000 by Radiall S A is an RF SMB CONNECTOR with 0.5 dB Insertion Loss, GOLD Termination Contact Finish, and SNAP Coupling Type. Made of POLYTETRAFLUOROETHYLENE, it has a 50 ohm Characteristic Impedance and operates up to 4 GHz. Ideal for applications requiring high-frequency signal transmission in telecommunications and aerospace industries.
R114186000
Radiall S A's R114186000 SSMB Connector features gold termination with nickel barrier, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, this crimp-type connector is IEC and MIL compliant, suitable for cable mounting in right-angle configuration.
R114.665.000W
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Length: .248 inch; Minimum Operating Temperature: -65 Cel;
R114665000W
The Radiall S A R114665000W is a RF SMB connector with gold-plated contacts and PTFE insulator. It has a 50 ohm impedance, operates up to 4 GHz, and features snap coupling for easy installation. Ideal for board mounting in applications requiring MIL and IEC conformity.
R114665000
The Radiall S A R114665000 SSMB Connector features 0.5 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it offers gold termination with nickel barrier for reliable signal transmission in board and panel mounting setups.
R114.005.000
Radiall S A's R114.005.000 is an RF SMB connector with a max operating frequency of 4 GHz. It has a low insertion loss of 0.5 dB and a voltage standing wave ratio of 1.41, making it suitable for high-frequency applications in the telecommunications industry.
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Mounting Style: STRAIGHT; Insertion Loss: .05 dB;
R114165000
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 4 GHz; Insulator Material: POLYTETRAFLUOROETHYLENE;
R114.165.000
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Panel Mount: NO;
R114.075.000
R114.075.000 by Radiall S A is a RF SMB CONNECTOR with 50 ohm impedance, 0.5 dB insertion loss, and 1.41 VSWR. It is ideal for applications requiring high durability, such as in commercial settings where it can withstand up to 500 cycles at temperatures ranging from -65 to 165 °C. The connector features gold-plated contacts with nickel barrier for reliable signal transmission in RG-316 cables.
R114075000
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; MIL Conformity: NO;
R114.082.000
Radiall S A's R114.082.000 is a RF SMB Connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.41 VSWR. Ideal for applications requiring high durability, it features gold-plated contacts, PTFE insulator, and operates b/w -65 to 165 °C at frequencies up to 4 GHz.
R114239
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CRIMP; Insertion Loss: .3 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved