Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FLASH PLD; Grading Of Temperature: MILITARY; Form Of Terminal: NO LEAD; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Flip Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Nova Conductors
Mil-Aero Solutions, Inc.
Resion
Sunrise Surplus Inc.
Electronics Depot
J2 Sourcing AB
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Ampacity Inc.
$14.000
Argo Parts USA
Glotronic Ltd.
Corphita
Continental Prestige Electronics
Supply Digital
Kepictronics
Aranea Global
Assy Fe
Programmable Logic Devices (PLD) 5962-89841063A attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Qp Semiconductor
Programmable IC Type:
Organization:
Output Function:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
5962-89841063A Programmable ICs trade compliance attributes, and parameters.
ECCN
3A001.A.2.C
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
P Semiconductor is a privately held California company incorporated in October 1985. QP Semiconductor was formed initially to provide semiconductor assembly, electrical test and qualification services to the military, aerospace and high reliability industries. The company has since evolved into a true fabless semiconductor company with a complete range of manufacturing capability by establishing product design and fab foundry relationships to complement its assembly, test and qualification capability. The products and services offered, focus on providing total parts solutions for DMS, (Diminished Manufacturing Sources) and EOL (End of Life) semiconductor components to the military, aerospace and high reliability markets. QP Semiconductor was acquired by British company e2v in October, 2008.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Lite-on Semiconductor
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
XC9572XL-10VQ44I
Xilinx
XC9572XL-10VQ44I by Xilinx is a 3.3V PLD with 72 macro cells, 34 I/O lines, and 100MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a propagation delay of 10ns, this CMOS technology-based device is suitable for high-speed digital designs.
ATF1508ASV-15AU100-T
Microchip Technology's ATF1508ASV-15AU100-T is a 3.3V EE PLD with 15ns propagation delay and 100 terminals. Ideal for industrial applications, it features a max clock frequency of 100MHz, 80 I/O lines, and operates b/w -40 to 85°C.
EPM7192SQI160-10N
Intel
EPM7192SQI160-10N by Intel is a 192 macrocell EE PLD with 10 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 125 MHz and has 124 I/O lines, making it ideal for high-speed digital designs requiring programmable logic devices. The device features in-system programmability and JTAG boundary scan test capability, ensuring easy integration and efficient testing processes.
ATF16V8CZ-15JU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
ATF16V8B-10JU
ATF16V8B-10JU by Microchip is a 5.5V CMOS PLD with 10ns propagation delay, ideal for industrial applications. Featuring 64 product terms and 8 I/O lines, it offers a max clock frequency of 68MHz. This flash PLD in chip carrier package supports surface mount with J bend terminals.
ATF16V8BQL-15PI
Atmel's ATF16V8BQL-15PI is a 5.5V CMOS PLD with 15ns propagation delay, ideal for industrial applications. Featuring 18 inputs and 8 I/O lines, this FLASH PLD offers a max clock frequency of 45MHz. With a rectangular package shape and through-hole terminals, it provides reliable performance in various electronic systems.
EPM3064ATI100-10N
Altera
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
5M240ZM100C5N
The Altera 5M240ZM100C5N is a programmable logic device with 192 macro cells, 14 ns propagation delay, and a maximum clock frequency of 118.3 MHz. It is a flash PLD that can be programmed in-system and has a package shape of square with a grid array, thin profile, fine pitch style. Its application includes output function using macrocells.
LC4128ZE-7TN100I
Lattice Semiconductor
LC4128ZE-7TN100I by Lattice Semiconductor is a 128 macrocell EE PLD with 7.5 ns propagation delay and 111 MHz max clock frequency. Ideal for applications requiring in-system programmability, it features 10 dedicated inputs, 64 I/O lines, and JTAG boundary scan test capability.
LC4032ZE-7MN64I
LC4032ZE-7MN64I by Lattice Semiconductor is a 32 macrocell EE PLD with 7.5 ns propagation delay, suitable for applications requiring in-system programmability and JTAG boundary scan testing. It features a max clock frequency of 111 MHz, operates at supply voltages b/w 1.7 V to 1.9 V, and has a package style of grid array with thin profile and fine pitch terminals.
XC9536XL-10VQ44C
The Xilinx XC9536XL-10VQ44C is a 36 macrocell FLASH PLD with 34 I/O lines, operating at a max clock frequency of 138.88 MHz. It features a propagation delay of 10 ns and can be used for applications requiring programmable logic devices in commercial-grade environments.
XC2C64A-5CP56C
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: BALL; No. of Terminals: 56; Package Code: LFBGA; Package Shape: SQUARE;
XC2C128-7VQ100I
XC2C128-7VQ100I by Xilinx is a 128 macrocell FLASH PLD with 80 I/O lines, operating at up to 119 MHz. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 1.9 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
LC4064V-75TN100I
LC4064V-75TN100I by Lattice Semiconductor is a 3.3V programmable logic device (PLD) with 64 macro cells and 74 inputs. It has a propagation delay of 7.5 ns and can operate at a max clock frequency of 111 MHz. This PLD is commonly used in applications requiring high-speed data processing and control functions.
EPM570M100I5N
The Intel EPM570M100I5N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 8.7 ns propagation delay. It is used for programmable logic applications requiring fast processing speeds and high input/output capabilities. The device features in-system programmability and JTAG boundary scan testing for efficient development and debugging processes.
XC95144XL-10TQG144I
XC95144XL-10TQG144I by Xilinx is a PLD with 117 I/O lines, 144 macro cells, and 138.88 MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a compact form factor of 20x20 mm and low profile design, it operates b/w -40 to 85°C temperatures.
SLG46826G
Renesas Electronics
SLG46826G by Renesas Electronics is a 19 macrocell PLA-type OT PLD with 13 inputs and 15 outputs. It operates b/w -40 to 85 °C, has a supply voltage range of 2.3-5.5 V, and comes in a small outline package for applications requiring programmable logic solutions.
EPM3032ATC44-7
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
ATF22V10C-5JX
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
EPM7256AETC100-10N
Intel's EPM7256AETC100-10N is a 256 macrocell EE PLD with 10ns propagation delay and 95.2MHz clock frequency. It operates at 3.3V, has 84 I/O lines, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high I/O capabilities in commercial temperature environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5962-8867005LA
Teledyne E2v (Uk)
OT PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Cypress Semiconductor
Qp Semiconductor
Defense Logistics Agency
5962-8984103LA
FLASH PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
5962-89841063A
EE PLD; Grading Of Temperature: MILITARY; Form Of Terminal: NO LEAD; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE;
5962-8872404LA
UV PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: WDIP; Package Shape: RECTANGULAR;
UV PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
5962-89841083A
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved