Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Width: 6.73 mm; Turns Ratio (Np:Ns): 1:1; Length: 12.7 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Authorized Procurement Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Pulse & Datacom Transformers 100B-1003FXT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulser
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
100B-1003FXT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Hitano Enterprise
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
EU2B-YS3203F
Idec
ROTARY SWITCH;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
PM-DB2762+
Holt Integrated Circuits
PM-DB2762+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 10.16x10.16x8.12 mm. It operates b/w -55°C to 130°C, suitable for data bus interfaces. Featuring a turns ratio of 1:2.5, it's a surface mount transformer ideal for various pulse and data communication applications.
22100
Schott Magnetics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 8.89 mm; Height: 6.35 mm; Turns Ratio (Np:Ns): 1:1:1:1; Inductance (Primary): 2000 uH;
78615/8JC
Murata Manufacturing
Murata Manufacturing's 78615/8JC is a Pulse Transformer with 1000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and turns ratio of 1CT:1CT.
B78476A8065A003
TDK
TDK B78476A8065A003 is a Pulse & Datacom Transformer with 1 function and an isolation voltage of 1500V. It has dimensions of L12.7XB7.11XH5.6 (mm) and is suitable for LAN; 10/100 BASE-T applications.
7491199212
Wuerth Elektronik & Kg
Wurth Elektronik 7491199212 is a Pulse & Datacom Transformer with 1500V isolation voltage, 127uH inductance, and 12V output voltage. Ideal for Ethernet applications, it operates b/w -40 to 125°C with a frequency range of 200KHz to 500KHz.
1001
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Isolation Voltage: 2000 V; Minimum ET Product: 200 V-us;
CV9052-ALC
Coilcraft
CV9052-ALC by Coilcraft is a Pulse Transformer with 931.5uH primary inductance and 1500V isolation voltage. Ideal for gate drive applications, it operates b/w -40 to 85°C, with a turns ratio of 1.25:1 and min ET product of 20 V-us.
H1197NL
Pulse Electronics
H1197NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for 10/100 BASE-TX Ethernet applications, featuring dimensions of L12.70xB6.73xH5.97 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installations in various networking setups.
6723
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Inductance (Primary): 350 uH; Width: 9.65 mm; Length: 21.08 mm; No. of Functions: 1;
HM5149NLT
HM5149NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. With inductance of 360uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high performance in a compact form factor.
ISRF-0249-D101
Schurter Ag
ISRF-0249-D101 by Schurter Ag is a pulse transformer with 3200V isolation voltage, 50ns max pulse rise time, and 1200uH primary inductance. Ideal for datacom applications, it offers compact dimensions of L18.2xB17.8xH13.5 (mm) and operates b/w -25°C to 100°C efficiently in surface mount configurations.
749014010
Wurth Elektronik 749014010 is a Datacom Transformer with 2 functions, 4500V isolation voltage, and 350uH inductance. It is IEEE approved and suitable for pulse applications. This surface mount transformer has dimensions of L17.1xB14.75xH8.4 mm and operates b/w 0-70°C temperature range.
750311592
Wurth Elektronik 750311592 is a Datacom Transformer with 1500V isolation voltage, 8uH inductance, and 1.9A output current. It is used for surface mount applications in data communication systems, ensuring efficient power transfer with dimensions of L32.31xB27.03xH13.69 mm and operating temperatures from -40 to 85°C.
TG110-RP55N5RL
Halo Electronics
TG110-RP55N5RL by Halo Electronics is a Pulse & Datacom Transformer with 2 primary and secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.1dB, and inductance of 350uH. Ideal for applications like 10/100 BASE-TX Ethernet due to its compact dimensions (L12.7xB7.11xH6.35 mm) and surface mount feature, operating b/w temperatures of 0-70°C at frequencies up to 100000 KHz.
1621
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1600; Maximum Operating Temperature: 70 Cel; Turns Ratio (Np:Ns): 1:2; Minimum Operating Temperature: 0 Cel;
750311423
Wurth Elektronik 750311423 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is used for applications requiring a max operating temperature of 125°C, output current of 4A, and output voltage of 5V.
PT61018PEL
Bourns
The Bourns PT61018PEL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications. It operates b/w -40°C to 85°C and features surface mounting method.
HX5020NL
HX5020NL by Pulse Electronics is a 4-function datacom transformer with an isolation voltage of 1500V and insertion loss of 1.2dB. It is designed for applications like 1000BASE-T, operates b/w -40°C to 85°C, and has dimensions of L27.94xB7.54xH8.33mm for surface mount installation.
Q1553-20
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-20; Turns Ratio (Np:Ns): 1:1.41; Isolation Voltage: 100 V; Maximum Operating Temperature: 130 Cel;
Murata Manufacturing's 1001 is a UL-approved pulse transformer with 2000V isolation voltage, 3000uH inductance, and 200 V-us min ET product. Ideal for datacom applications, it features a compact size of 15.06mm x 15.06mm x 15.75mm and operates b/w temperatures of 0°C to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pulser
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved