Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: LENGTH & HEIGHT DIM INCLUDE TERMINAL ALSO; Maximum Operating Temperature: 125 Cel; Height: 12.5 mm; Width: 10 mm;
Median Price
$2.290
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
$0.615
100+ parts
$0.586
1k+ parts
$0.567
10k+ parts
-
Chip1Stop
$2.910
DigiKey
$4.410
$2.836
$2.354
$2.186
Mouser Electronics
$2.210
Verical
IBS Electronics
$2.175
TME
Perfect Parts
SMPS Transformers PH9185.043NLT attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Additional Features:
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PH9185.043NLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Transistors
Bkc Semiconductors
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Devices
EU2B-YS2J03C
Idec
ROTARY SWITCH;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
749196111
Wuerth Elektronik & Kg
Wurth Elektronik 749196111 is a SMPS transformer with 3 primary windings, inductance of 27.4uH, and dimensions L12.9xB9.2xH6.2 (mm). It operates b/w -40 to 125°C, has TIN SILVER COPPER terminal finish, and is surface mountable. Ideal for power supply applications requiring compact and efficient transformers.
C1588-ALD
Coilcraft
Coilcraft's C1588-ALD is a 7W SMPS transformer with primary inductance of 155uH. It has two secondary windings, output voltage of 5V, and operates b/w -40 to 85°C. Ideal for surface mount applications with max input voltage of 72V and frequency up to 250KHz.
PH0804CNL
PH0804CNL by Pulse Electronics is a SMPS transformer with 160W power rating, 3 primary windings, and 275uH inductance. Ideal for applications requiring a surface mount transformer with operating temperatures from -40°C to 125°C and frequencies ranging from 200kHz to 700kHz.
NA5871-AL
NA5871-AL by Coilcraft is an 800W SMPS transformer with a primary inductance of 42uH. It has a max operating temperature of 120°C and is suitable for surface mount applications. Its output voltage is 54V, making it ideal for power supply systems.
UA7902-AL
Coilcraft UA7902-AL is a 2W SMPS Transformer with primary inductance of 25uH. It outputs 5V, suitable for applications requiring a min input voltage of 7V and max input voltage of 24V. Ideal for surface mounting, it measures 17.07mm x 10mm x 5.97mm, making it versatile for various power supply designs.
750310617
The Wurth Elektronik 750310617 is a SMPS transformer with 1 primary winding and an inductance of 4.5 uH. It has dimensions of L29.08XB23.11XH11.43 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a min input voltage of 9V and an output voltage of 12V, making it ideal for use in surface mount installations.
PA6582-AL
Coilcraft's PA6582-AL is a 30W SMPS transformer with 2 primary windings, 9uH inductance, and output voltage of 54V. Ideal for surface mount applications, it operates b/w -40°C to 85°C and supports input voltages from 6V to 32V.
749196311
Wurth Elektronik 749196311 is a SMPS transformer with 3 primary windings, inductance of 23.3uH, and dimensions L22.1xB17.5xH8.3 (mm). It operates b/w -40 to 125 °C and is designed for surface mount applications in electronic devices requiring efficient power conversion.
GA3172-AL
Coilcraft GA3172-AL is a 14W SMPS transformer with primary inductance of 500uH. It operates b/w -40°C to 85°C, outputting 20V. Ideal for power supplies and converters due to its compact L22.75xB14.25xH23.74mm size and through-hole mounting feature.
HA3802-BLD
Coilcraft's HA3802-BLD is a 10W SMPS transformer with primary inductance of 150uH. It has two secondary windings and operates b/w -40 to 125°C. Ideal for applications requiring a 5V output voltage, it features surface mounting and dimensions of L17.2xB14.98xH8.626mm.
ZA9674-BED
ZA9674-BED by Coilcraft is a 12W SMPS Transformer with 9uH primary inductance. It has 2 windings for both primary and secondary, operating at -40 to 85°C. Ideal for applications requiring a max output voltage of 48V, it is AEC-Q200 approved for automotive use.
PH9185.011NL
PH9185.011NL by Pulse Electronics is a 3W SMPS Transformer with primary inductance of 750uH. It operates b/w -40 to 125°C, suitable for surface mount applications due to its compact size (13x10x12.5mm).
FL2015-4LB
Coilcraft's FL2015-4LB is a 6W SMPS transformer with primary inductance of 44uH. It operates b/w -40 to 85°C, outputting 1600V at max frequency of 100KHz. Ideal for surface mount applications in power supplies and converters.
FA2469-ALB
Coilcraft's FA2469-ALB is a SMPS transformer with primary inductance of 19uH, operating from -40 to 85°C. It has dimensions of L10.92xB8.60xH9.02mm and terminal finish of Sn/Ag. Ideal for surface mount applications with input voltage range of 4.5V to 8.5V, commonly used in power supply circuits.
750310799
The Wurth Elektronik 750310799 is a SMPS transformer with 1 primary winding and an inductance of 25 uH. It has dimensions of L9.78XB9.14XH10.54 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring an output voltage of 15 V, such as power supplies or electronic devices.
B0358-CLD
Coilcraft's B0358-CLD SMPS Transformer offers 2uH primary inductance, operates b/w -40°C to 85°C, and comes in L23.37xB20.57xH9.14 mm dimensions. Ideal for surface mount applications in power supplies and converters due to its compact size and high-quality construction.
PL300-100L
Coilcraft's PL300-100L is a 300W SMPS transformer with 2 primary windings and an inductance of 287uH. It operates b/w -40 to 125°C, suitable for AEC-Q200 applications. With dimensions of L29.46xB26.67xH10.4mm, it is designed for surface mounting in high-frequency circuits up to 700KHz.
760390013
Wurth Elektronik 760390013 is an AEC-Q200 approved SMPS Transformer with primary inductance of 475uH. Operating b/w -40 to 125 °C, it outputs 5V at a frequency range of 250-550 KHz. Ideal for surface mount applications in electronics requiring a compact transformer design.
78253/35MC
Murata Manufacturing
Murata Manufacturing's 78253/35MC is a 0.5W SMPS transformer with primary inductance of 300uH. Operating at -40 to 85°C, it has output voltage of 5V and nominal input voltage of 3.3V. Ideal for surface mount applications with max frequency of 500KHz.
7491196212
7491196212 by Wuerth Elektronik & Kg is a SMPS transformer with an inductance of 128 uH. It has two secondary windings and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a 12 V output voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved