Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Dimensions: L23.37XB21.6XH9.1 (mm); Inductance (Primary): 345 uH; No. of Winding (Primary): 3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers PH0815NL attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Additional Features:
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PH0815NL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
261
Deltrol Controls
Other Relays;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
NXP Semiconductors
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Hitano Enterprise
PA0806NL
Pulse Electronics
PA0806NL by Pulse Electronics is a 140W SMPS Transformer with primary inductance of 153uH. It has two windings for both primary and secondary, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies, it operates b/w -40°C to 125°C temperature range.
PH0270NL
PH0270NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 876uH, and 2 secondary windings. It operates b/w -40°C to 125°C, outputs at 12V, and has a max frequency of 132KHz. Ideal for applications requiring through-hole mounting such as power supplies and voltage converters.
74030
Power Integrations
The Power Integrations 74030 is a SMPS transformer with a power rating of 22W. It has one primary winding with an inductance of 750uH and two secondary windings. The transformer is suitable for applications requiring output voltages of 6V and 4.6V, and it can handle input voltages ranging from 90V to 120V.
ETH1-460LD
Coilcraft
Coilcraft's ETH1-460LD is a 120W SMPS transformer with 4 primary windings and an inductance of 350uH. It operates b/w -40°C to 85°C, suitable for various power applications. This surface mount transformer is ideal for compact designs requiring high power density.
YA9035-ALD
Coilcraft's YA9035-ALD is a 6W SMPS Transformer with primary inductance of 24uH. It has 2 secondary windings, operates b/w -40°C to 85°C, and outputs 15V. Ideal for surface mount applications in power supplies with input voltage ranging from 4V to 65V.
PA1836NL
PA1836NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 4.5uH, and dimensions L29.21xB21.84xH11.43 mm. It operates b/w -40 to 125°C, outputs 5V at max frequency of 200KHz, suitable for surface mount applications in power supplies with input voltage range of 9-36V.
PH0807CNL
PH0807CNL by Pulse Electronics is a SMPS transformer with 160W power rating, 3 primary windings, and 194uH inductance. Ideal for applications requiring a surface mount transformer with operating temperatures from -40°C to 125°C and frequencies ranging from 200kHz to 700kHz.
PA1131NLT
PA1131NLT by Pulse Electronics is a 3W SMPS Transformer with 2 primary windings and inductance of 500uH. It has output voltages of 8V and 5V, suitable for applications requiring a max operating frequency of 200KHz. Ideal for surface mounting method in various electronic devices.
MA5519-AL
MA5519-AL by Coilcraft is a SMPS transformer with a power rating of 720W. It has one primary winding with an inductance of 190.8uH and a secondary winding for an output voltage of 12V. This transformer is commonly used in applications such as surface mount power supplies.
750311880
Wuerth Elektronik & Kg
Wurth Elektronik 750311880 is a SMPS transformer with inductance of 2.5uH, operating temperature range from -40 to 125°C, and dimensions L9.78xB9.14xH10.54mm. It has two secondary windings for output voltages of 5V each, suitable for applications requiring a min input voltage of 3V and operating frequency b/w 200kHz to 600kHz on surface mount boards.
PA5100.004NLT
PA5100.004NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125°C, outputs 3.3V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a compact transformer with a max input voltage of 57V.
HM110-C3W4V5LFTR
Tt Electronics Plc
HM110-C3W4V5LFTR by Tt Electronics Plc is a 3W SMPS Transformer with 2 primary windings and an inductance of 225uH. Ideal for applications requiring a surface mount transformer, it operates b/w -40°C to 125°C, making it suitable for various power supply designs.
ZB1055-AED
Coilcraft's ZB1055-AED SMPS Transformer has a power rating of 9.6W, inductance of 14uH, and output voltage of 48V. Ideal for applications requiring a transformer with approvals up to AEC-Q200 standards, operating at temperatures from -40°C to 85°C, and supporting frequencies up to 300KHz.
750312367
750312367 by Wurth Elektronik is a SMPS Transformer with inductance of 300uH, output voltage of 3.3V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature and IEC approvals.
POE13F-12LD
Coilcraft's POE13F-12LD is a 13W SMPS transformer with primary inductance of 35uH. It features 3 primary windings and 2 secondary windings, suitable for applications requiring an output voltage of 12V. With dimensions of L17.2xB14.98xH8.51mm, it operates b/w -40 to 125°C and supports a max input voltage of 72V at a frequency up to 250 KHz, making it ideal for surface mounting in power supply circuits.
760390015
Wurth Elektronik 760390015 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature, it has approvals including AEC-Q200, CUL, and UL for reliability in automotive and industrial electronics.
MA5597-AL
Coilcraft's MA5597-AL is a 6W SMPS transformer with 2 primary windings, 2.22uH inductance, and 12V output voltage. Ideal for applications requiring a min input voltage of 85V and max input voltage of 265V. Through-hole mounted design with dimensions of 27.94mm x 24.13mm x 27.94mm.
POE30P-50LD
Coilcraft's POE30P-50LD is a 3W SMPS transformer with primary inductance of 310000uH. It features dual windings for 12V and 5V output voltages, suitable for surface mount applications. With dimensions of L10.92xB8.6xH9.02mm, it operates b/w -40 to 85°C and supports frequencies up to 250KHz.
PA5111.003NLT
PA5111.003NLT by Pulse Electronics is a 24W SMPS Transformer with 2 primary windings at 80uH inductance. It has 2 secondary windings, operates b/w -40 to 130 °C, and outputs 12V. Ideal for surface mount applications with a max frequency of 200 KHz and input voltage range of 33-75V.
CTX02-14659
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L10.0XB12.0XH6.2 (mm); Inductance (Primary): 547 uH; No. of Winding (Secondary): 2; No. of Winding (Primary): 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved