Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FA2924-ALD by Coilcraft is a 15W SMPS transformer with primary inductance of 40uH. It has 2 secondary windings, output current of 4.5A, and output voltage of 3.3V, suitable for power applications. Operating temperature ranges from -40 to 85°C, with dimensions L17.75xB13.46xH12.32mm for surface mounting method.
Median Price
$4.360
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Coilcraft
1+ parts
$4.040
100+ parts
-
1k+ parts
$2.170
10k+ parts
$1.340
Mouser Electronics
$4.680
$3.010
$2.710
Maritex
$3.753
Nova Conductors
$4.035
Vyrian
Chip Stock
Odintec Ltd.
MISTER SPROCKETS
Ampacity Inc.
$3.260
Argo Parts USA
Continental Prestige Electronics
$3.954
Netroflash
Authorized Procurement Solutions
Futuretech Components
Perfect Parts
This product can handle up to 15 watts of power, making it suitable for various applications that require a moderate power output.
The inductance value of 40 uH helps in efficiently transforming and regulating the input voltage to the desired output voltage.
With an output current of 4.5 A, this transformer can deliver sufficient current to power connected devices without any issues.
The compact size of this transformer makes it easy to integrate into various electronic devices or circuits without taking up much space.
Designed specifically for power applications, this transformer is ideal for use in power supplies, converters, and other power-related electronics.
SMPS Transformers FA2924-ALD attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Additional Features:
Application:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current-1:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
FA2924-ALD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Jiangsu Jiejie Microelectronics
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
YA9035-ALD
Coilcraft's YA9035-ALD is a 6W SMPS Transformer with primary inductance of 24uH. It has 2 secondary windings, operates b/w -40°C to 85°C, and outputs 15V. Ideal for surface mount applications in power supplies with input voltage ranging from 4V to 65V.
78250JVC-R
Murata Manufacturing
Murata Manufacturing's 78250JVC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, making it ideal for compact electronic devices requiring high-performance transformers in power supplies.
76253/55ENC
Murata Manufacturing's 76253/55ENC is a SMPS transformer with dimensions of 15mm x 12.5mm x 15mm. It features matte tin terminal finish and through-hole mounting, suitable for power supply applications.
2013
Hammond Manufacturing
Hammond Manufacturing's 2013 SMPS Transformer has a power rating of 25W, height of 77.724mm, and width of 63.5mm. It operates b/w 0.15KHz to 7KHz frequencies, suitable for chassis mounting in various applications requiring efficient power transformation within compact spaces.
HA4061-AL
Coilcraft's HA4061-AL is a SMPS transformer with 2 primary windings, 125uH inductance, and TRAY packing. It operates b/w -40 to 85°C, outputs 500V, and has dimensions of L29.8xB27.9xH25.3 mm. Ideal for applications requiring a min input voltage of 120V and max input voltage of 377V with through-hole mounting feature.
ZA9671-BED
ZA9671-BED by Coilcraft is a 12.5W SMPS Transformer with 2 primary windings at 9uH inductance. It operates b/w -40 to 85°C, outputs 5V at max frequency of 300KHz. Ideal for surface mount applications in automotive electronics due to AEC-Q200 approval and compact size (13.21x10.92x10mm).
31221
Pico Electronics
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Approvals (V): MIL-PRF-27; Minimum Operating Temperature: -55 Cel; Nominal Input Voltage (V): 24; Length: 7.11 mm;
FCT1-33M22SLD
Coilcraft's FCT1-33M22SLD is a 25W SMPS transformer with primary inductance of 95uH. It has two secondary windings, output voltage of 3.3V, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring input voltage range of 33-57V.
FL2015-9LD
Coilcraft FL2015-9LD is a 6W SMPS transformer with primary inductance of 22uH. It operates b/w -40 to 85°C, outputting 1600V at max input voltage of 16V. Ideal for surface mount applications up to 100 KHz frequency.
HA3994-AL
Coilcraft's HA3994-AL is a SMPS transformer with 2 primary windings and 3 secondary windings. It offers an inductance of 7.5 uH, operates b/w -40 to 85 °C, and has output voltages of ±15 V. Ideal for surface mount applications in power supplies with input voltage range from 5V to 24V.
FA2671-ALD
Coilcraft's FA2671-ALD SMPS Transformer offers 10W power, 1500V isolation voltage, and 40uH primary inductance. Ideal for signal applications with a 3.3V output voltage, it operates b/w -40°C to 85°C and has a compact size of L15.24xB10.5xH11.43mm for surface mount installation.
ZB1053-AED
Coilcraft's ZB1053-AED is a 7.5W SMPS transformer with 2 primary and secondary windings, offering an inductance of 12.5uH. It operates at temperatures ranging from -40 to 85°C and has a max input voltage of 42V. This transformer is commonly used in automotive applications due to its AEC-Q200 approval and compact dimensions (10x10.92x13.21mm).
PA1836NL
Pulse Electronics
PA1836NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 4.5uH, and dimensions L29.21xB21.84xH11.43 mm. It operates b/w -40 to 125°C, outputs 5V at max frequency of 200KHz, suitable for surface mount applications in power supplies with input voltage range of 9-36V.
78253/35JC-R
Murata Power Solutions
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Packing Method: TR, 15 INCH; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 500 KHz;
760390015
Wuerth Elektronik & Kg
Wurth Elektronik 760390015 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature, it has approvals including AEC-Q200, CUL, and UL for reliability in automotive and industrial electronics.
PA5111.003NL
PA5111.003NL by Pulse Electronics is a 24W SMPS Transformer with 2 primary and secondary windings, inductance of 80uH, and output voltage of 12V. Ideal for applications requiring a transformer with a max operating temperature of 130°C, surface mounting feature, and operating frequency up to 200 KHz.
PA2627NLT
PA2627NLT by Pulse Electronics is a 30W SMPS Transformer with 2 primary windings and inductance of 50.5uH. It operates b/w -40 to 130°C, outputs at 3.3V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a transformer with dimensions L13.08xB15.24xH11.45mm.
CX9628-ALD
CX9628-ALD by Coilcraft is a 12W SMPS transformer with primary inductance of 43.7uH. It has two secondary windings and operates b/w -40°C to 85°C. Ideal for applications requiring a 5V output voltage, it is a surface mount transformer suitable for power supplies with input voltages ranging from 36V to 57V.
B0358-CLD
Coilcraft's B0358-CLD SMPS Transformer offers 2uH primary inductance, operates b/w -40°C to 85°C, and comes in L23.37xB20.57xH9.14 mm dimensions. Ideal for surface mount applications in power supplies and converters due to its compact size and high-quality construction.
NA5743-ALD
Coilcraft's NA5743-ALD SMPS Transformer has 12W power rating, 4uH inductance, and operates b/w -40 to 125°C. Ideal for AEC-Q200 approved applications requiring 80V/30V output voltages with a compact size of 11.43x10.5x12.7mm for surface mounting method.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FA2900-ALD
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver - Tin - with Nickel barrier; Height: 11.43 mm; Minimum Input Voltage (V): 18; Inductance (Primary): 50 uH;
FA2924-ALB
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver (Sn/Ag); Maximum Operating Temperature: 85 Cel; Packing Method: TR; Width: 13 mm;
FA2925-ALB
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver (Sn/Ag); Minimum Input Voltage (V): 36; Maximum Input Voltage (V): 72; JESD-609 Code: e2;
FA2925-ALD
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver - Tin - with Nickel barrier; No. of Winding (Secondary): 2; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Input Voltage (V): 72;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved