Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 13.34 mm; Minimum Input Voltage (V): 33; Output Voltage-1: 8 V; Power Rating: 3 W;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers PA1131NL attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Additional Features:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Dimensions:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PA1131NL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Bourns
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PH0805CNL
Pulse Electronics
PH0805CNL by Pulse Electronics is a SMPS transformer with a power rating of 160W. It has 3 primary windings and an inductance of 327uH. This surface mount transformer is commonly used in applications requiring high frequency operation up to 700KHz.
PA2627NL
PA2627NL by Pulse Electronics is a SMPS transformer with 2 primary windings and inductance of 50.5uH. It operates b/w -40 to 130°C, outputs 3.3V, and supports input voltages from 18-75V. Ideal for surface mount applications with dimensions L13.08xB15.24xH11.45mm and max frequency of 200KHz.
GA3172-AL
Coilcraft
Coilcraft GA3172-AL is a 14W SMPS transformer with primary inductance of 500uH. It operates b/w -40°C to 85°C, outputting 20V. Ideal for power supplies and converters due to its compact L22.75xB14.25xH23.74mm size and through-hole mounting feature.
ZA9671-BED
ZA9671-BED by Coilcraft is a 12.5W SMPS Transformer with 2 primary windings at 9uH inductance. It operates b/w -40 to 85°C, outputs 5V at max frequency of 300KHz. Ideal for surface mount applications in automotive electronics due to AEC-Q200 approval and compact size (13.21x10.92x10mm).
POE13P-12LB
Coilcraft's POE13P-12LB is a 13W SMPS transformer with 2 primary windings and inductance of 127000uH. It operates b/w -40°C to 85°C, has output voltages of 12V, and dimensions of L13.46xB13.0xH12.32mm. Ideal for surface mount applications in power over Ethernet systems up to 72V input voltage and 250KHz frequency.
PH0814CNL
PH0814CNL by Pulse Electronics is a 160W SMPS Transformer with 3 primary windings and inductance of 275uH. It operates b/w -40 to 125°C, suitable for high-frequency applications (200-700 KHz) requiring surface mounting. With dimensions of 24.65x21.59x10.1mm, it's ideal for compact power supply designs.
760871135
Wuerth Elektronik & Kg
Wurth Elektronik 760871135 SMPS Transformer with inductance of 1250 uH, operating temperature range -40 to 125 °C, and output voltages of 12V. Ideal for surface mount applications requiring compact dimensions and input voltage range of 85-265V.
750316033
Wurth Elektronik 750316033 is a SMPS transformer with inductance of 370uH. It has approvals from AEC-Q200, CSA, EN, IEC, UL and operates b/w -40 to 125°C. Ideal for applications requiring output voltage of 3.3V and min input voltage of 4.5V in compact dimensions of L12.32xB10.41xH11.43mm for surface mounting method.
7491195112
Wurth Elektronik 7491195112 is a SMPS transformer with inductance of 41uH, 2 secondary windings, and max operating temp of 125°C. It has output voltages of 12V each and is ideal for surface mount applications in power supplies with input voltage range from 33V to 57V.
POE26W3.3VS5-R
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE26W3.3VS5-R; Packing Method: REEL; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; TURNS RATIO: 1:0.29:0.29:0.83:0.42; Length: 21.5 mm;
YA9127-BED
Coilcraft's YA9127-BED is a 6W SMPS transformer with 2 primary windings, 40uH inductance, and output voltage of 12V. Ideal for applications requiring a surface mount transformer with operating temperatures from -40 to 85°C and frequencies ranging from 125kHz to 150kHz.
FA2900-ALD
FA2900-ALD by Coilcraft is a 25W SMPS transformer with primary inductance of 50uH. It features 2 primary windings and 3 secondary windings, suitable for applications requiring a max operating temperature of 125°C. With dimensions of L30.0xB20.57xH11.43 mm, it is designed for surface mounting in power supplies with an output voltage of 12V.
750313995
750313995 by Wurth Elektronik is a SMPS Transformer with 2 primary and secondary windings. It operates b/w -40 to 125 °C, providing output voltages of 15V and 5V. Ideal for applications requiring a surface mount transformer with input voltage range of 15-40V and operating frequency of 300-600 KHz.
GA3460-BL
Coilcraft GA3460-BL is a SMPS transformer with 4 primary windings, 2.5uH inductance, and max operating temp of 125°C. Ideal for applications requiring 500V output voltage, it has dimensions of L26.75xB26.0xH14.0mm and supports input voltages from 12V to 24V.
YA9034-ALD
Coilcraft's YA9034-ALD is a 6W SMPS Transformer with primary inductance of 28.8uH, suitable for applications requiring 12V output voltage. With TR packing method and surface mounting feature, it operates b/w -40 to 85°C temperature range.
YA8779-BLD
Coilcraft's YA8779-BLD is a 6W SMPS transformer with primary inductance of 30uH. It has 2 secondary windings, operates b/w -40°C to 85°C, and supports max input voltage of 70V. Ideal for applications requiring a compact surface mount transformer with output voltage of 5V at up to 350KHz frequency.
VGT15SEFD-250S4A7
TDK
VGT15SEFD-250S4A7 by TDK is an AEC-Q200 approved SMPS transformer with 2 primary windings at 2.6uH inductance and 4 secondary windings. Operating b/w -40°C to 130°C, it's a surface mount type transformer measuring 23mm x 15.4mm x 12mm, ideal for automotive and industrial applications.
TGM-H281NFLF
Halo Electronics
TGM-H281NFLF by Halo Electronics is a 3W SMPS transformer with 2 primary and secondary windings, offering 1500V isolation voltage. Its compact dimensions of L12.07xB11.56xH8.64 (mm) make it suitable for surface mount applications requiring high isolation levels, such as in power supplies or industrial equipment. The transformer features a turns ratio of 1:1:2.6:2.6 and matte tin over nickel terminal finish for reliable performance in various electronic devices.
78250JC
Murata Manufacturing
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
DA2034-ALD
Coilcraft's DA2034-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40°C to 125°C, suitable for applications requiring input voltages from 3V to 24V. With dimensions of L30.0xB20.57xH11.43mm, it is designed for surface mounting in various power supply circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved