Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Maximum Operating Temperature: 130 Cel; Turns Ratio (Np:Ns): 1:2.5; Length: 15.87 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$13.220
$12.700
$12.440
$12.190
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Pulse & Datacom Transformers PM-DB27408+ attributes and parameters. Explore more Pulse & Datacom Transformers devices from Premier Magnetics
Application:
Approvals (V):
Height:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
PM-DB27408+ Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Welcome to Premier Magnetics, a global leader with over 30 years of experience in magnetics design & manufacturing. We are widely-recognized for producing industry-leading high quality magnetics components, and for effectively deploying innovative design and engineering services to customers all over the world. We supply an extensive standard product line with hundreds of UL/CSA recognized products, such as power supply transformers, dc/dc converters, RJ-45 connectors, current inductors, MIL-1553 Data Bus transformers, and LAN magnetics. Premier Magnetics distinguishes itself from others in our field through our World Class Design, Engineering, and Manufacturing expertise and by providing full custom circuit design support for your unique application. This allows us to design and deliver customized solutions for transformers, inductors, chokes, DC-DC Converters, and RJ45 Connectors with integrated magnetics. Our value-added offerings include Plastic Injection Molding products along with turnkey PCB assembly services. We support complete PCB assemblies integrated with our magnetic components, or we can use components specified by our customers’ bill of materials. Our global OEM customer base depends on our engineering expertise to provide custom and off-the-shelf electronic component solutions that support Communication, Networking, and a host of Power Applications. Dedicated to delivering the highest quality products and short cycle times at the most competitive cost in the industry, Premier has sales and distribution locations throughout the world, with manufacturing locations in Southern California, Taiwan, Vietnam, and China.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Continental Device India
Goodwork Semiconductor
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
TG10G-RP02NJLF
Halo Electronics
TG10G-RP02NJLF by Halo Electronics is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500V and dimensions of L13.84XB12.19XH6.35 (mm). This transformer is used in applications such as 10G BASE-T and Ethernet, with a max operating temperature of 70°C and min operating temperature of 0°C.
96046124009
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): IEC; Length: 14.5 mm; Minimum Operating Temperature: -40 Cel; Height: 13.5 mm;
ESMIT-4180/C
Sumida
Sumida's ESMIT-4180/C is a DATACOM TRANSFORMER with 125uH inductance, AEC-Q200 approval, and -40 to 105°C operating range. Ideal for pulse & datacom applications due to its compact size (3.5x5.2x7.1mm) and surface mount feature for easy installation.
TG110-E050N5RLTR
TG110-E050N5RLTR by Halo Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX Ethernet applications. It offers 2 functions with an isolation voltage of 1500V and primary inductance of 350uH. This surface mount transformer operates b/w -40°C to 85°C, measuring L12.7xB7.11xH6.35mm in dimensions.
WSL-A12.326
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEC; Isolation Voltage: 1875 V; No. of Functions: 2; Turns Ratio (Np:Ns): 1:1;
Q1553-22
Pulser
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum Operating Temperature: -55 Cel; Height: 6.35 mm; Application: GENERAL PURPOSE; Turns Ratio (Np:Ns): 1CT:1.41CT;
750871010
Wuerth Elektronik & Kg
The Wuerth Elektronik & Kg 750871010 is a Datacom Transformer with an isolation voltage of 4000V, inductance of 3300uH, and turns ratio of 14.36:1. It is designed for applications requiring reliable pulse and data communication transformations, featuring through-hole mounting and dimensions of L24.0xB20.0xH16.0mm. Operating temperatures range from -40°C to 125°C, making it suitable for various industrial environments.
750311596
The Wuerth Elektronik & Kg 750311596 is a Pulse & Datacom Transformer with an isolation voltage of 1500V, inductance of 12uH, and output current of 1.9A. It is used for data communication applications requiring high voltage isolation and efficient power transfer in compact spaces.
96046313009
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEC; Height: 12.5 mm; Packing Method: TRAY; Width: 13.5 mm;
1026
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Width: 15.06 mm; Application: GENERAL PURPOSE;
M21038/27-29T
Defense Logistics Agency
M21038/27-29T by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55 to 130 °C. Ideal for datacom applications, it features a 1:1.79 turns ratio and through-hole mounting for easy installation.
HX2019NLT
Pulse Electronics
HX2019NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 turns ratio, 1500V isolation voltage, and 1.2dB insertion loss. It is designed for 10/100 BASE-TX Ethernet applications, operates b/w -40°C to 85°C, and comes in L12.70xB7.11xH5.97 mm dimensions for surface mount installation.
14255R-400
Renesas Electronics
DATACOM TRANSFORMER;
M21038/27-05
M21038/27-05 by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It features dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55°C to 130°C. Ideal for datacom applications, it has a turns ratio of 1:1.41 and is through-hole mounted for easy installation.
H1187NL
H1187NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for Ethernet applications like 10/100 BASE-TX, featuring dimensions of L7.62xB7.0xH6.35 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installation in various electronic devices.
74010
Pico Electronics
74010 by Pico Electronics is a MIL-PRF-21038 approved pulse transformer with 500V isolation voltage, 600uH inductance, and 20 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, dimensions of L11.43xB11.43xH7.11 (mm), and operates b/w -55 to 130 °C temperatures.
TG1G-E001NZLF
TG1G-E001NZLF by Halo Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. Ideal for Ethernet applications like 10/100 BASE-TX, it operates b/w -40 to 85°C and features matte tin over nickel terminal finish.
1000B-5001XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Application: 10/100/1000 BASE-T; No. of Functions: 4;
SM13072APEL
Bourns
SM13072APEL by Bourns is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T, ETHERNET, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature ranges from -40°C to 125°C.
749023113C
Wurth Elektronik 749023113C is a UL approved transformer with 1500V isolation voltage, 350uH inductance, and 4 functions. Ideal for 1000 BASE-T applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 16.5mm x 9.6mm x 2.4mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PM-DB2791S+
Holt Integrated Circuits
PM-DB2791S+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has a turns ratio of 1:2.5 and operates b/w -55°C to 130°C. Ideal for DATA BUS INTERFACE applications, it is compact at 10.16mm x 4.699mm x 10.16mm for surface mount installation.
PM-DB2791S
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Application: DATA BUS INTERFACE; Length: 10.16 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; Additional Features: HEGHT DIM INCLUDES TERMINAL ALSO;
PM-DB2791S by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions of L15.87xB15.87xH6.35 mm. It operates b/w -55 to 130°C, has a turns ratio of 1:2.5, and uses Tin/Lead terminal finish. Ideal for DATA BUS INTERFACE applications due to its surface mount feature and DATACOM TRANSFORMER type design.
PM-DB2745S+
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Height: 3.937 mm; Width: 16 mm;
PM-DB2745S
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Impedance (Primary): 4000 OHMS; Application: DATA BUS INTERFACE; Minimum Operating Frequency: 75 KHz;
PM-DB2745S+ by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with 4000Ω impedance, suitable for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, has 3 windings, and dimensions of L23.62xB16.0xH3.937 mm, making it ideal for surface mount installations.
PM-DB2745L+
PM-DB2745L+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 16.0x16.0x3.973 mm. It operates b/w -55°C to 130°C, has turns ratios of 1:2.5 and 1:1.79, and features matte tin terminal finish for surface mount applications in data bus interfaces.
PM-DB2745L
PM-DB2745L by Holt Integrated Circuits is a pulse and datacom transformer with MIL-STD-1553 approval. It has 1 primary winding and 3 secondary windings, with an impedance of 4000 ohms. This surface mount transformer is commonly used for data bus interface applications.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; Height: 3.937 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Dimensions: L16.0XB16.0XH3.937 (mm); Maximum Operating Temperature: 130 Cel; Width: 16 mm;
PM-DB2725EX
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Terminal Finish: Tin/Lead (Sn/Pb); Width: 10.16 mm; Dimensions: L10.16XB10.16XH6.1 (mm);
PM-DB2725EX+
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; 1:1.79;
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; No. of Functions: 1; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
PM-DB2762
PM-DB2762 by Holt Integrated Circuits is a DATACOM TRANSFORMER with 1:2.5 Turns Ratio, MIL-STD-1553 approved for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, with dimensions of L10.16xB10.16xH8.128 mm and Tin/Lead terminal finish for surface mount installation.
PM-DB2762+
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; No. of Functions: 2;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Length: 10.16 mm; Height: 8.128 mm; Dimensions: L10.16XB10.16XH8.12 (mm);
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Length: 10.16 mm; Turns Ratio (Np:Ns): 1:2.5; Height: 8.128 mm;
PM-DB2776
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 2; Height: 4.699 mm; Width: 10.16 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved