Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Application: DATA BUS INTERFACE; Length: 10.16 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Advanced Electronics
$4.565
$4.337
AZTECH Wire
$18.458
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Pulse & Datacom Transformers PM-DB2791S attributes and parameters. Explore more Pulse & Datacom Transformers devices from Premier Magnetics
Additional Features:
Application:
Approvals (V):
Height:
Length:
Mounting Feature:
No. of Functions:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
PM-DB2791S Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Welcome to Premier Magnetics, a global leader with over 30 years of experience in magnetics design & manufacturing. We are widely-recognized for producing industry-leading high quality magnetics components, and for effectively deploying innovative design and engineering services to customers all over the world. We supply an extensive standard product line with hundreds of UL/CSA recognized products, such as power supply transformers, dc/dc converters, RJ-45 connectors, current inductors, MIL-1553 Data Bus transformers, and LAN magnetics. Premier Magnetics distinguishes itself from others in our field through our World Class Design, Engineering, and Manufacturing expertise and by providing full custom circuit design support for your unique application. This allows us to design and deliver customized solutions for transformers, inductors, chokes, DC-DC Converters, and RJ45 Connectors with integrated magnetics. Our value-added offerings include Plastic Injection Molding products along with turnkey PCB assembly services. We support complete PCB assemblies integrated with our magnetic components, or we can use components specified by our customers’ bill of materials. Our global OEM customer base depends on our engineering expertise to provide custom and off-the-shelf electronic component solutions that support Communication, Networking, and a host of Power Applications. Dedicated to delivering the highest quality products and short cycle times at the most competitive cost in the industry, Premier has sales and distribution locations throughout the world, with manufacturing locations in Southern California, Taiwan, Vietnam, and China.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Toshiba
Microsemi
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ITNF-0239-D202
Schurter Ag
Schurter Ag's ITNF-0239-D202 is a pulse transformer with 3500V isolation voltage, 1500 ns max pulse rise time, and 1600 uH primary inductance. Ideal for datacom applications due to its compact size (L22.7xB22.3xH13.6 mm) and through-hole mounting feature, operating b/w -25°C to 100°C temperature range.
78250MVC
Murata Manufacturing
78250MVC by Murata Manufacturing is a UL-approved Pulse & Datacom Transformer with 1500V isolation voltage, 2000uH inductance, and 50 V-us min ET product. It is used for ISOLATION applications, operates b/w -40 to 85 °C, and features matte tin terminal finish.
PM-DB2745D
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Height: 3.937 mm; Length: 23.62 mm; No. of Functions: 1;
74095
Pico Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Height: 7.11 mm;
1000B-5001XNL
Pulser
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; No. of Functions: 4; Minimum Operating Temperature: -55 Cel; Packing Method: TAPE & REEL; TUBE;
SM51108PEL
Bourns
Bourns SM51108PEL is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX, Ethernet, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
ITNF-0135-D101
Schurter Ag's ITNF-0135-D101 pulse transformer offers 3500V isolation voltage, 900ns max pulse rise time, and 1100uH primary inductance. Ideal for applications requiring high voltage isolation and fast pulse response, such as data communication systems or industrial automation equipment.
IT258
Schaffner Holding Ag
IT258 by Schaffner Holding Ag is a UL approved Pulse Transformer with 750V isolation voltage, 2500uH inductance, and 250ns pulse rise time. Ideal for datacom applications due to its compact L17.6XB16.7XH11.3 (mm) dimensions and through-hole mounting feature, operating b/w -25°C to 70°C temperature range.
77204C
Murata Manufacturing's 77204C is a pulse transformer with 2500V isolation voltage, 4000uH inductance, and 240 V-us min ET product. It is used for data communication applications due to its through-hole mounting feature and compact dimensions of 12.3mm x 20.3mm x 25.4mm.
HM5149NL
Pulse Electronics
HM5149NL by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 360uH, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for surface mount applications in data communication systems.
HM6098NLT
HM6098NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 120uH inductance. Ideal for surface mount applications, it operates b/w -40 to 105°C and has a turns ratio of 1:1.
78602/16C
78602/16C by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has a primary inductance of 4000 uH and a min ET product of 28 V-us. This transformer is commonly used in pulse and datacom applications.
760301304
Wuerth Elektronik & Kg
The Wurth Elektronik 760301304 is a Pulse Transformer with 2500V isolation voltage, 1080uH inductance, and 120 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C and has a turns ratio of 2.5:1:1.
1011
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
750311591
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
HM2113ZNLT
HM2113ZNLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH primary inductance and 4300V isolation voltage. It operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation and compact surface mount design.
PA2009NLT
PA2009NLT by Pulse Electronics is a 3-function pulse transformer with 1500V isolation voltage and 55.5ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mount assembly in tape & reel packaging.
Q1553-22
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-22; Maximum Operating Temperature: 130 Cel; Application: GENERAL PURPOSE; Width: 8.89 mm;
1000B-5002XNLT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 17.78 mm; Turns Ratio (Np:Ns): 1:1; Minimum Operating Temperature: -55 Cel; Application: 10/100/1000 BASE-T;
H5007NLT
H5007NLT by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000KHz. Ideal for applications like 1000BASE-T, this transformer comes in compact dimensions of L17.53xB12.2xH5.26mm for surface mount installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PM-DB2791S+
Holt Integrated Circuits
PM-DB2791S+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has a turns ratio of 1:2.5 and operates b/w -55°C to 130°C. Ideal for DATA BUS INTERFACE applications, it is compact at 10.16mm x 4.699mm x 10.16mm for surface mount installation.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; Additional Features: HEGHT DIM INCLUDES TERMINAL ALSO;
PM-DB2791S
PM-DB2791S by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions of L15.87xB15.87xH6.35 mm. It operates b/w -55 to 130°C, has a turns ratio of 1:2.5, and uses Tin/Lead terminal finish. Ideal for DATA BUS INTERFACE applications due to its surface mount feature and DATACOM TRANSFORMER type design.
PM-DB2745S+
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Height: 3.937 mm; Width: 16 mm;
PM-DB2745S
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Impedance (Primary): 4000 OHMS; Application: DATA BUS INTERFACE; Minimum Operating Frequency: 75 KHz;
PM-DB2745S+ by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with 4000Ω impedance, suitable for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, has 3 windings, and dimensions of L23.62xB16.0xH3.937 mm, making it ideal for surface mount installations.
PM-DB2745L+
PM-DB2745L+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 16.0x16.0x3.973 mm. It operates b/w -55°C to 130°C, has turns ratios of 1:2.5 and 1:1.79, and features matte tin terminal finish for surface mount applications in data bus interfaces.
PM-DB2745L
PM-DB2745L by Holt Integrated Circuits is a pulse and datacom transformer with MIL-STD-1553 approval. It has 1 primary winding and 3 secondary windings, with an impedance of 4000 ohms. This surface mount transformer is commonly used for data bus interface applications.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; Height: 3.937 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Dimensions: L16.0XB16.0XH3.937 (mm); Maximum Operating Temperature: 130 Cel; Width: 16 mm;
PM-DB2725EX
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Terminal Finish: Tin/Lead (Sn/Pb); Width: 10.16 mm; Dimensions: L10.16XB10.16XH6.1 (mm);
PM-DB2725EX+
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; 1:1.79;
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; No. of Functions: 1; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
PM-DB2762
PM-DB2762 by Holt Integrated Circuits is a DATACOM TRANSFORMER with 1:2.5 Turns Ratio, MIL-STD-1553 approved for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, with dimensions of L10.16xB10.16xH8.128 mm and Tin/Lead terminal finish for surface mount installation.
PM-DB2762+
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; No. of Functions: 2;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Length: 10.16 mm; Height: 8.128 mm; Dimensions: L10.16XB10.16XH8.12 (mm);
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Length: 10.16 mm; Turns Ratio (Np:Ns): 1:2.5; Height: 8.128 mm;
PM-DB2776
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 2; Height: 4.699 mm; Width: 10.16 mm;
PM-DB2793S
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Width: 10.16 mm; Additional Features: HEGHT DIM INCLUDES TERMINAL ALSO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved