Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 15; Package Code: HSOP; Package Shape: RECTANGULAR; Width: 8.89 mm;
Median Price
$4.960
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$4.400
1k+ parts
$4.020
10k+ parts
$3.780
Verical
-
$4.450
Chip1Stop
$5.350
$5.280
Authorized Procurement Solutions
Kepictronics
MOSFET Gate Drivers SID1152K attributes and parameters. Explore more MOSFET Gate Drivers devices from Power Integrations
High Side Driver:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Nominal Output Peak Current Limit:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
SID1152K Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Rfe International
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Diotec Semiconductor Ag
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LM5106MM
Texas Instruments
LM5106MM by Texas Instruments is a MOSFET gate driver with a max supply voltage of 14V and power supplies up to 12V. It features a small outline, thin profile package style suitable for automotive applications. With turn-on time of 0.69us and turn-off time of 0.056us, it provides efficient high side driver functionality in a compact form factor.
PUCC21710QDWQ1
Texas Instruments' PUCC21710QDWQ1 is an AEC-Q100 compliant MOSFET gate driver with 16 terminals. Operating temperature ranges from -40°C to 125°C, making it suitable for automotive applications. This rectangular package features a small outline and gull wing terminal form, ideal for surface mount installations.
TC4427AEOA713
TC4427AEOA713 by Microchip Technology is a MOSFET gate driver with 2 functions, operating at supply voltages from 4.5V to 18V. It features a Schmitt trigger input, true output polarity, and totem-pole output characteristics. Ideal for industrial applications requiring high side drivers in compact designs.
2EDF7275KXUMA1
Infineon Technologies
2EDF7275KXUMA1 by Infineon Technologies is a MOSFET Gate Driver with a max supply voltage of 20V and turn-on/off time of 0.044us. It features a grid array package style and is suitable for industrial applications requiring precise control over high side drivers.
FAN7390AMX1
Onsemi
FAN7390AMX1 by Onsemi is a MOSFET gate driver with a supply voltage range of 10-20V. It features a small outline package, dual terminals, and high side driver capability. Ideal for automotive applications, it has an operating temperature range of -40 to 125°C and supports IGBT/MOSFET drivers with a peak current limit of 4.5A.
MIC4606-2YML-T5
MIC4606-2YML-T5 by Microchip is a MOSFET Gate Driver with 16V max supply voltage, -40 to 125°C operating temp range, and 1A output peak current limit. Ideal for automotive applications, it features full bridge based interface IC type and 0.075us turn-on/off time for efficient switching performance.
L6392D
STMicroelectronics
L6392D by STMicroelectronics is a MOSFET gate driver with a max supply voltage of 20V and power supplies up to 15V. It features a small outline package style, high side driver capability, and turn-on/off times of 0.2us. Ideal for automotive applications due to its BCD technology and operating temperature range from -40°C to 125°C.
NCP81075MTTXG
NCP81075MTTXG by Onsemi is a MOSFET gate driver with 10 terminals, suitable for automotive applications. It operates b/w -40 to 140°C and has a supply voltage range of 8.5-20V. With a turn-on/off time of 0.05us, it features an interface IC type of buffer or inverter based MOSFET driver.
LTC4449EDCB#TRMPBF
Linear Technology
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR;
UCC27211DRMR
UCC27211DRMR by Texas Instruments is a MOSFET gate driver with 2 channels, 12V nominal voltage, and 4A max output current. It is designed for automotive applications, featuring a small outline package style and very thin profile. With high side drivers and true output polarity, it operates in temperatures ranging from -40 to 140°C.
EL7202CSZ-T7
Renesas Electronics
EL7202CSZ-T7 by Renesas Electronics is a MOSFET Gate Driver with 15V max supply voltage, 2A peak current limit, and 25us turn-on/off time. Ideal for industrial applications requiring precise control of MOSFETs in harsh environments.
LTC4440ES6#TRMPBF
LTC4440ES6#TRMPBF by Analog Devices is a MOSFET Gate Driver with 2.4A peak current limit, 0.065us turn-on/off time, and 0.4mA supply current. Ideal for industrial applications requiring high side drivers in compact spaces due to its small outline package style and dual terminal position.
LMG1025QDEETQ1
LMG1025QDEETQ1 by Texas Instruments is a MOSFET Gate Driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. Designed for automotive applications, it features a small outline package style and operates in temperatures ranging from -40°C to 125°C.
ADUM4135BRWZ-RL
ADUM4135BRWZ-RL by Analog Devices is a MOSFET Gate Driver with 16 terminals, operating voltage range of 2.3V to 30V, and built-in transient, thermal, and under-voltage protections. Widely used in automotive applications due to its small outline package style and high side driver capability for efficient power management.
IR2125SPBF
International Rectifier
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
LTC7004IMSE#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
FAN7387MX
FAN7387MX by Onsemi is a MOSFET gate driver with 14V supply voltage, transient and under voltage protections. It has 8 terminals, operates b/w -40 to 125 °C, and is ideal for automotive applications requiring half bridge based MOSFET drivers.
FAN7390MX
FAN7390MX by Onsemi is a MOSFET gate driver with a max supply voltage of 22V and power supplies up to 15V. It features push-pull output characteristics, true output polarity, and high side driver functionality. Ideal for automotive applications, this compact driver has a turn-on/off time of 0.22us and supports half bridge based IGBT/MOSFET interfaces.
L6498DTR
L6498DTR by STMicroelectronics is a MOSFET gate driver with 20V max supply voltage, 2.5A output peak current limit, and 0.12us turn-on/off time. It is used in applications requiring high side drivers, BCDMOS technology, and Schmitt trigger input characteristics.
SI8231AB-D-IS
Skyworks Solutions
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Power Integrations
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved