Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 1 A;
Median Price
$0.960
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
ACDS - Activité Composants Distribution Service
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Bristol Electronics
$0.538
$0.507
Dan-Mar Components
Authorized Procurement Solutions
Motion Control ICs BRD1160C-TL attributes and parameters. Explore more Motion Control ICs devices from Power Integrations
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
BRD1160C-TL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Renesas Electronics
Shanghai Lunsure Electronic Technology
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Taiwan Semiconductor
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
Rugao Dachang Electronic
TC648BEOA
Microchip Technology
Microchip Technology's TC648BEOA is a motion control IC with 1 function, operating at a nominal voltage of 5V. It is used as a brushless DC motor controller in industrial applications.
DRV8906QPWPRQ1
DRV8906QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It is an AEC-Q100 grade IC for automotive applications, supporting a supply voltage range of 3-5.5 V. This BRUSH DC MOTOR CONTROLLER features a small outline package with gull wing terminals and thin profile design.
DRV8711DCPR
DRV8711DCPR by Texas Instruments is a motion control IC with a nominal voltage of 24V. It features a small outline package style, dual terminal position, and can operate in industrial temperature grades. This stepper motor controller has a max supply voltage of 52V and is suitable for applications requiring precise motion control in various industries.
TB6560AHQ(O,8)
Toshiba's TB6560AHQ(O,8) is a Motion Control IC with 25 terminals and max output current of 3.5A. Ideal for stepper motor control applications, it operates b/w -30 to 85°C with supply voltage range of 4.5V to 5.5V in a rectangular package style.
DRV8889AQPWPRQ1
DRV8889AQPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 45V, and output current up to 0.01A. Ideal for automotive applications due to AEC-Q100 screening level, it features a compact rectangular package with very thin profile and dual terminal position. Operating temperature ranges from -40°C to 125°C, making it suitable for demanding environments.
TLE5205-2G
Infineon Technologies
Infineon's TLE5205-2G is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-18V with a peak output current of 6A. With small outline packaging and single terminal position, it's ideal for compact motor control applications.
MCP8025-115E/MP
MCP8025-115E/MP by Microchip is a Motion Control IC with 40 terminals, operating voltage range of 6V to 19V, and temp range of -40°C to 125°C. Ideal for automotive applications, it features a compact square package with surface mount capability and matte tin terminal finish.
DRV8803PWP
DRV8803PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 8.2V to 24V, and max output current of 0.02A. It is a Stepper Motor Controller suitable for industrial applications due to its compact size, dual terminal position, and high temperature tolerance up to 85°C.
DRV8245HQRXZRQ1
Texas Instruments' DRV8245HQRXZRQ1 is a Motion Control IC with 16 terminals and BICMOS technology. It operates b/w -40 to 125 °C, supporting a max output current of 32 A at supply voltages ranging from 4.5 V to 35 V. Ideal for applications requiring precise control over half-bridge brush DC motors in automotive environments due to its AEC-Q100 screening level.
DRV10983QPWPRQ1
Texas Instruments' DRV10983QPWPRQ1 is a Motion Control IC with 24 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, with Vsup ranging from 6.2V to 28V. The package style is small outline, heat sink/slug, and thin profile for automotive applications.
DRV8432DKD
DRV8432DKD by Texas Instruments is a Motion Control IC with 36 terminals, operating voltage of 12-50V, and output current up to 15A. Ideal for industrial applications requiring precise stepper motor control in a compact package. Features dual terminal position, small outline style, and high temperature tolerance up to 85°C.
MC3479FN
Onsemi
MC3479FN by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 7.2V to 16.5V, and max output current of 0.5A. It is a Stepper Motor Controller suitable for commercial applications requiring precise motion control in compact spaces.
BD63150AFM-E2
ROHM
ROHM's BD63150AFM-E2 is a motion control IC with a max output current of 6A. It operates at a nominal voltage of 24V and has a small outline package style. This IC is suitable for brush DC motor control applications.
L6506D013TR
STMicroelectronics
L6506D013TR by STMicroelectronics is a Motion Control IC with 20 terminals, operating at 4.5-7V. It features a small outline package, Gull Wing terminal form, and is ideal for stepper motor control applications. With dimensions of 12.8mm x 7.5mm x 2.65mm, it can withstand peak reflow temperatures up to 260°C.
HIP4020IBZT
Renesas Electronics' HIP4020IBZT is a motion control IC with 20 terminals, operating voltage range of 2.5V to 15V, and output current up to 0.5A. Ideal for stepper motor control applications, it features a small outline package with dimensions of 12.8mm x 7.5mm x 2.65mm and can operate in temperatures ranging from -40°C to 85°C.
DRV8801QRTYRQ1
DRV8801QRTYRQ1 by Texas Instruments is a Motion Control IC with a supply voltage range of 8-38V and max output current of 2.8A. This NMOS technology chip carrier is suitable for automotive applications, featuring a wide operating temperature range from -40 to 125°C. With surface mount capability and quad terminals, it offers precise control for brush DC motor controllers.
BD6393FP-E2
BD6393FP-E2 by ROHM is a motion control IC with a supply voltage range of 16V to 28V. It features a max output current of 1.2A and operates in temperatures ranging from -25°C to 75°C. This IC is commonly used as a stepper motor controller in various applications.
DRV8426EPWPR
DRV8426EPWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating at -40 to 125°C. It features a max output current of 1.5A and supports stepper motor control applications. This small outline IC has a package size of 9.7mm x 4.4mm, making it suitable for automotive use with a supply voltage range of 0-5.5V.
TMC5130A-TA
Trinamic Motion Control & Kg
TMC5130A-TA by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 5.5V to 46V, and max output current of 2A. Ideal for automotive applications due to its temp grade and compact size (7mm x 7mm). Features include quad terminal position, CMOS technology, and matte tin finish.
PS22A74
Mitsubishi Electric
Mitsubishi Electric's PS22A74 is a Motion Control IC with 42 terminals, operating at 15V nominal voltage. It features a max output current of 30A and supports AC motor control applications. The IC comes in a rectangular package measuring 31mm x 79mm, suitable for microelectronic assembly with through-hole terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Power Integrations
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved