Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Shell Finish: TIN; Shell Size: 3/B;
Median Price
$3.060
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$2.240
100+ parts
$1.690
1k+ parts
-
10k+ parts
PEI Genesis
$2.690
Farnell
$3.560
Nova Conductors
Continental Prestige Electronics
$6.980
Netroflash
D-Sub Connectors CBD5W5M0000X attributes and parameters. Explore more D-Sub Connectors devices from Positronic Industries
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
CBD5W5M0000X Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
At Positronic, we build high reliability power and signal connectors. But our true call is to provide certainty. Rock solid, mission-critical performance upon which you can bank life and limb, family and fortune. We consider it an honor. We consider it an inviolable trust.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DB25P064TXLF
Amphenol Communications Solutions
DB25P064TXLF by Amphenol is a D-Sub Connector with 25 contacts, rated for 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage rating of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
M83513/04-B04N
Itt Cannon
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Shell Size: B;
M24308/4-3F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: RND PIN-SKT; Mating Contact Finish: NOT SPECIFIED;
836149016
Molex
Molex 836149016 D-Sub Connector features 25 contacts in a 2-row configuration with a mating contact pitch of 0.109". It has a body length of 2.088" and width of 0.494", suitable for board and panel mounting applications. The connector type is D Microminiature, with male gender contacts and staggered PCB contact pattern.
M24308/4-5F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; IEC Conformity: NO;
5747375-8
TE Connectivity
TE Connectivity's 5747375-8 D-Sub Connector features 37 contacts, 2 rows, and a mating contact pitch of 0.112". With a body length of 2.732" and insulation resistance of 1G ohm, it is ideal for board mounting applications requiring a rated current of 6A in commercial settings.
M24308/4-11F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Shell Size: 1/E; Filter Feature: NO;
M83513/03-C11N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Maximum Insertion Force (N): 2.78;
M24308/2-5F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 50; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED;
8250-6005
3m Electronic Products Division
8250-6005 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.108", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1400VAC. Ideal for commercial applications, this male connector has a total of 50 contacts, gold termination finish, and operates b/w -55 to +105°C.
DCMM-8W8S
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Contact Gender: FEMALE; IEC Conformity: NO; Shell Material: STEEL; Mounting Type: PANEL; MIL Conformity: NO;
DAU-15P-K87-F0
ITT Cannon's DAU-15P-K87-F0 D-Sub Connector features 15 contacts, gold-plated with nickel barrier. With a dielectric voltage of 1000VAC, it operates b/w -55 to 105°C. Ideal for commercial applications, this male connector has a shell made of steel and is designed for crimp termination on cables.
M24308/2-13Z
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-24308; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-2: LOCKING;
M24308/2-33F
TE Connectivity's M24308/2-33F D-Sub Connector features 104 contacts, rated at 5A signal current. With a shell size of 6 and steel material, it is designed for cable mounting applications. Operating temperature ranges from -55 to 125°C, making it suitable for various industrial environments.
L717SDB25P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .163 inch; Contact Pattern: STAGGERED;
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .191 inch; Termination Type: CRIMP; Body Length: 2.65 inch;
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
M83513/02-AN
Glenair
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
M83513/02DN
Bel Fuse
Bel Fuse's M83513/02DN D-Sub Connector features 25 contacts, 2 rows, and a mating contact pitch of 0.05". With an insulation resistance of 5000000000 ohm, it is ideal for applications requiring a durable connector with MIL conformity and a temperature range from -55 to 125°C.
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Plating Thickness (inch): 50u;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CBD5W5F00000/AA
D SUBMINIATURE CONNECTOR; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature (Cel): 125;
CBD5W5F00000/AA-1841.1
D SUBMINIATURE CONNECTOR;
CBD5W5F00000/AA-759.1
CBD5W5F0000S/AA
D SUBMINIATURE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
CBD5W5F0F000/AA
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; Body Width: .494 inch;
CBD5W5F65F000/AA
CBD5W5F65F000/AA by Positronic Industries is a D-Sub Connector with 1 row and 5 contacts. It has a mating contact pitch of 0.268 inch and insulation resistance of 5000000000 ohm. This connector is commonly used in board mounting applications for its durability and high current rating of 80 A.
CBD5W5M0000Z
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP/SOLDER; JESD-609 Code: e4; UL Flammability Code: 94V-0;
CBD5W5M65S0TS
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; DIN Conformance: NO; Contact Material: COPPER ALLOY;
CBD5W5M37S600Z/AA
CBD5W5F00Z00
D SUBMINIATURE CONNECTOR; Manufacturer Series: CBD;
CBD5W5M00000
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO;
CBD5W5M0000S
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; UL Flammability Code: 94V-0; Termination Contact Finish: POWER-GOLD FLASH OVER NICKEL; SIGNAL-GOLD FLASH OVER NICKEL/GOLD (50) OVER NICKEL;
CBD5W5M850000
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: CBD; Total No. of Contacts: 5; IEC Conformity: YES;
CBD5W5M00GE0
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Shell Size: 3/B; Filter Feature: NO;
CBD5W5M000V50
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; DIN Conformance: NO; MIL Conformity: NO;
CBD5W5M0000X/AA
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYESTER; Mating Contact Finish: POWER-GOLD FLASH OVER NICKEL; SIGNAL-GOLD FLASH OVER NICKEL/GOLD (50) OVER NICKEL; Total No. of Contacts: 5;
CBD5W5M00Z0Z
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Finish: TIN; JESD-609 Code: e4; Insulator Material: GLASS FILLED POLYESTER;
CBD5W5M0S5000-1557.0
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; UL Flammability Code: 94V-0;
CBD5W5M0S5000-1557.3
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Shell Finish: ZINC; JESD-609 Code: e4;
CBD5W5M0S5000-1557.5
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Shell Material: STEEL/BRASS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved