Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PE-0402HFB102STA by Pico Electronics is a FERRITE CHIP filter with 2 terminals, 1.1 ohm DC resistance, and 1000 OHM output impedance. Operating b/w -40 to 105 °C, it's ideal for data line filtering in surface mount applications at 0.25 A rated current.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.049
1k+ parts
$0.033
10k+ parts
$0.021
Mouser Electronics
$0.048
$0.032
$0.029
Authorized Procurement Solutions
-
Perfect Parts
Having 2 terminals allows for easy installation and connection in a circuit.
Ferrite chip filters are known for their excellent noise suppression capabilities, making this product ideal for reducing interference in data lines.
With a high maximum operating temperature, this filter can withstand harsh environmental conditions.
The compact width of 0.5mm ensures that this filter can be easily integrated into tight spaces or on small circuit boards.
The low DC resistance minimizes power loss and ensures efficient operation of the filter.
The high output impedance of 1000 ohms helps in attenuating unwanted signals effectively.
The surface mount design allows for easy and secure placement on circuit boards, saving space and facilitating mass production.
With a rated current of 0.25A, this filter can handle moderate power levels without any issues.
The ultra-thin height of 0.5mm makes this filter suitable for applications where space is limited or height constraints are present.
Data Line Filters PE-0402HFB102STA attributes and parameters. Explore more Data Line Filters devices from Pico Electronics
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Width (mm):
PE-0402HFB102STA Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Founded in 1967 by Mr. Joseph Sweeney and Mr. Henry Spoldi, Pico Electronics was established to improve and reduce the size of transformers and converters - which at the time were quite large. They began developing miniature and ultra-miniature units of high quality and reliability for military specifications and commercial air flight applications. With the new technologies that allow for surface mounting and other installation venues, Pico Electronics has come to be known as "the" resource for 'anything that flies' using a miniature conductor or transformer. Additionally, Pico Electronics became the experts in miniature DC to DC power converters and miniature AC to DC power supplies. Over the years Pico established itself as a leader in high voltage DC to DC output (the high voltage outputs that meet today's modern requirements of up to 10,000 volts DC). Today, Pico Electronics is constantly improving the efficiency of the power source and power factor correction, and is extending their high voltage product line. Pico offers ultra-miniature packages and high power units (up to 300 watts) as well as regulated, programmable, and dual output packages. They are able to accommodate many different input voltages in both the DC range, anywhere from 5 volts DC to 380 volts DC, and in the AC to DC range, having universal AC input. The never-ending drive to push the high voltage envelope - and the reduction of the size and weight from rack type systems into brick and half brick modules - is why Pico Electronics' DC to DC converters, transformers and inductors can be found everywhere - from the single engine aircraft to the international space station to Sojourner (the mobile module that landed on Mars).
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diodes Incorporated
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Rugao Dachang Electronic
Central Semiconductor
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Unitrode
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
EMIF06-USD14F3
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
NVT4858HKZ
DATA LINE FILTER;
BLM21PG121SN1D
Murata Manufacturing
Murata Manufacturing's BLM21PG121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.03 ohm and output impedance of 120 OHM, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM18KG700TN1D
Murata Manufacturing's BLM18KG700TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With a max DC resistance of 0.022 ohm and output impedance of 70 ohm, it is ideal for applications requiring filtering at frequencies up to 100 MHz. This surface mount ferrite chip filter has dimensions of L1.6xB0.8xH0.6 mm and can handle a rated current of 3.5 A.
PA4339.701NLT
Pulse Electronics
PA4339.701NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 5uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with 4A rated current and output impedance of 700 ohm.
742792040
Wuerth Elektronik & Kg
Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.
MMZ1608Y601BTA00
TDK
TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.
LI0805G301R-10
Laird Technologies
Laird Technologies' LI0805G301R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.2 ohm and rated current of 0.7 A.
STF202-22T1G
Onsemi
STF202-22T1G by Onsemi is a Data Line Filter with 2 functions and 6 terminals. It operates b/w -55°C to 125°C, has a max DC resistance of 24 ohm, and capacitance of 68 uF. This surface mount filter is IEC approved and commonly used in applications requiring data line filtering.
BLM18BD471SN1D
BLM18BD471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
BLM21BB331SN1D
Murata's BLM21BB331SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.33 ohm, it offers a max frequency of 100 MHz and output impedance of 330 OHM. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM18PG181SN1D
Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
BLM18PG330SN1D
Murata Manufacturing's BLM18PG330SN1D is a chip bead data line filter with 2 terminals, rated for 3A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 33Ω at frequencies ranging from 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
MPZ2012S102ATD25
TDK's MPZ2012S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. Operating b/w -55°C to 125°C, it is ideal for data line filtering in surface mount applications.
BLM18PG471SH1D
BLM18PG471SH1D by Murata is a chip bead data line filter with AEC-Q200 screening. It has 2 terminals, measures 1.6x0.8x0.8mm, and offers an output impedance of 470 ohm at a rated current of 1A. Ideal for surface mount applications, it operates b/w -55 to 125°C and is designed for frequencies ranging from 100 MHz with max DC resistance of 0.2 ohm.
NFM41PC204F1H3B
Murata Manufacturing's NFM41PC204F1H3B is a FEED THROUGH CAPACITOR with 1000 Mohm insulation resistance, 50V rated voltage, and 200000 uF capacitance. Ideal for data line filtering applications due to its compact size (L4.5XB1.6XH1.0 mm), high current rating of 2A, and wide operating temperature range (-55 to 85 °C).
74270044
Wurth Elektronik 74270044 is a FERRITE BEAD Data Line Filter with 451 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, and it has a diameter of 15.85 mm. Ideal for applications requiring noise suppression in electronic circuits.
742792662
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
BKP1608HS101-T
Taiyo Yuden
BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pico Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved