Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SECONDARY; Chemical Composition: LEAD ABSORBENT GLASS MAT; Battery Capacity: 13 Ah; Voltage: 24 V; Terminal Type: LEAD; Length: 178 mm;
Median Price
$849.410
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Farnell
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Continental Prestige Electronics
$786.490
Batteries UPS-BAT/VRLA-WTR/24DC/13AH attributes and parameters. Explore more Batteries devices from Phoenix Contact
Battery Type:
Battery Capacity:
Voltage Rating:
Battery Chemistry:
Height:
Length:
Width:
Weight:
Peak Operating Temperature:
Lowest Operating Temperature:
Certifications:
Packaging Style:
Connector Type:
UPS-BAT/VRLA-WTR/24DC/13AH Batteries trade compliance attributes, and parameters.
ECCN
3A991.J.2
ECCN Governance
EAR
HTS
8507.80.82.00
SB
8507.80.01.00
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BR2330/BN
Panasonic
Panasonic BR2330/BN is a 3V lithium battery with 0.255 Ah capacity. With a diameter of 23mm and height of 3mm, it operates b/w -30°C to 80°C. Ideal for applications requiring a primary button cell with a flat positive terminal, such as small electronic devices.
CR1632
Maxell Asia (Singapore)
PRIMARY; Battery Size: 1632; Chemical Composition: LITHIUM MANGANESE DIOXIDE; Battery Capacity: .14 Ah; Voltage: 3 V; Terminal Type: BUTTON(-), FLAT(+);
CR-3032/F2N
Panasonic CR-3032/F2N battery, 3V voltage, 0.5Ah capacity. LITHIUM chemistry, 30.1mm diameter, -30 to 85 °C operating temp. Ideal for IEC/UL approved applications requiring a reliable primary battery with TAB terminal type in compact devices.
ML-1220/F1BN
Panasonic ML-1220/F1BN is a 3V LITHIUM battery with 0.017 Ah capacity. With a size of 12.6mm diameter and 2mm height, it operates b/w -20 to 60 °C. Ideal for applications requiring reliable power source in compact devices like watches and small electronics.
BR2335T3L-BA
Rayovac
Rayovac BR2335T3L-BA battery, 3V voltage, 0.3 Ah capacity, LITHIUM CARBON-MONOFLUORIDE chemistry. Ideal for UL approved applications with -40 to 85 °C operating temperature range. Sized at 23mm diameter and 3.5mm height, weighing 3.4g for primary use in various devices.
NP1.2-12FR
Enersys
Enersys NP1.2-12FR is a 12V battery with 1.2Ah capacity, lead calcium alloy composition, and -15 to 50 °C operating temperature range. Ideal for UPS systems, security alarms, and emergency lighting due to its compact size (97x48x56 mm) and UL/IEC approvals.
BR-1225/HBN
Panasonic BR-1225/HBN battery is a 3V lithium cell with 0.048 Ah capacity. With diameter of 12.5mm and length of 2.5mm, it operates b/w -30°C to 85°C. Ideal for applications requiring compact primary batteries like small electronics and medical devices.
813
PRIMARY; Chemical Composition: ALKALINE ZINC-MANGANESE DIOXIDE; Voltage: 1.5 V; Terminal Type: BUTTON(+), FLAT(-); Minimum Operating Temperature: -18 Cel; Maximum Operating Temperature: 55 Cel;
BR-2330/GVFN
Panasonic BR-2330/GVFN is a 3V LITHIUM battery with 0.255 Ah capacity. With -30 to 85 °C operating range, it's ideal for applications requiring reliable power in compact devices. Measuring 23.1mm in diameter and 3.65mm in height, it weighs only 3.2g making it suitable for small electronics like remote controls and sensors.
UPS-BAT-KIT-6X9AH
Phoenix Contact
SECONDARY; Voltage: 12 V; Terminal Type: LEAD; Maximum Operating Temperature: 40 Cel; Length: 455 mm; Width: 65 mm;
CR1220MFRFH
Renata Sa
Renata Sa's CR1220MFRFH is a 3V lithium manganese dioxide battery with 0.04 Ah capacity. At 2.8mm height and 12.5mm diameter, it weighs 1.1g and has TAB terminal type. Ideal for small electronics like watches, calculators, and medical devices due to its compact size and reliable power output.
PC1500
Duracell
Duracell PC1500 AA battery offers 1.5V voltage, -20 to 54 °C operating temp range, and ALKALINE MANGANESE DIOXIDE composition. Ideal for various devices like remotes, toys, and clocks due to its primary battery type and compact size of 49.5mm height and 14.5mm diameter.
CR1225FH-LF
The Swatch Group
PRIMARY; Battery Size: 1225; Chemical Composition: LITHIUM MANGANESE DIOXIDE; Battery Capacity: .048 Ah; Voltage: 3 V; Terminal Type: TAB;
CR2325SM
PRIMARY; Battery Size: 2325; Terminal Type: TAB; Length: 2.5 mm; Diameter: 23 mm;
376
Energizer Holdings
PRIMARY; Chemical Composition: SILVER OXIDE; Battery Capacity: .024 Ah; Voltage: 1.55 V; Terminal Type: BUTTON(-), FLAT(+); Weight: .42 g;
55602303013
Varta Microbattery
Varta Microbattery 55602303013 is a 1.2V NiMH battery with 0.015Ah capacity, ideal for small devices. UL approved, it has a diameter of 11.5mm and weight of 1.3g, suitable for compact applications requiring long standard charge time of 57600s.
CR3677X-HE1
Murata Manufacturing
Murata Manufacturing's CR3677X-HE1 battery, UL approved, offers 2Ah capacity with 3V voltage. Ideal for applications requiring a compact 36.2mm diameter and 7.7mm height primary battery with MANGANESE DIOXIDE LITHIUM chemistry. Operating range from -40°C to 85°C makes it versatile for various electronic devices.
NP7-12L
Yuasa Battery
Yuasa Battery NP7-12L is a 12V lead-acid battery with 7Ah capacity. It has UL approval and operates b/w -20°C to 60°C. Suitable for various applications requiring reliable power, it measures 151x65x97.5mm and weighs 2200g, making it ideal for use in UPS systems and emergency lighting.
CR2477
Sony
PRIMARY; Battery Size: 2477; Chemical Composition: LITHIUM MANGANESE DIOXIDE; Battery Capacity: 1 Ah; Voltage: 3 V; Terminal Type: BUTTON(+), FLAT(-);
BR-2325/VCN
Panasonic BR-2325/VCN battery is a 3V lithium cell with 0.165 Ah capacity. With approvals from IEC and UL, it operates b/w -30°C to 85°C. Measuring 22.8mm in diameter and 2.45mm in height, it's ideal for applications requiring a reliable power source in compact spaces like medical devices or IoT sensors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPS-BAT/VRLA/24DC/12AH
SECONDARY; Chemical Composition: LEAD ABSORBENT GLASS MAT; Battery Capacity: 12 Ah; Voltage: 24 V; Terminal Type: TAB; Minimum Operating Temperature: 0 Cel;
UPS-BAT/VRLA/24DC/7.2AH
SECONDARY; Chemical Composition: LEAD ABSORBENT GLASS MAT; Battery Capacity: 7.2 Ah; Voltage: 24 V; Terminal Type: TAB; Approvals (V): CUL; UL;
UPS-BAT/PB/24DC/7AH
SECONDARY; Chemical Composition: LEAD-ACID ABSORBENT GLASS MAT; Battery Capacity: 7 Ah; Voltage: 24 V; Terminal Type: SCREW; Height: 110 mm;
UPS-BAT-KIT-4X3X7AH
SECONDARY; Voltage: 12 V; Terminal Type: LEAD; Length: 455 mm; Height: 95 mm; Packing Method: BULK;
UPS-BAT-KIT-VRLA2X12V/38AH
SECONDARY; Battery Capacity: 38 Ah; Voltage: 24 V; Terminal Type: STUD; Width: 330 mm; Weight: 25200 g;
UPS-BAT/PB/24DC/12AH
SECONDARY; Chemical Composition: LEAD-ACID ABSORBENT GLASS MAT; Battery Capacity: 12 Ah; Voltage: 24 V; Terminal Type: SCREW; Length: 202 mm;
UPS-BAT-KIT-VRLA2X12V/1,3AH
SECONDARY; Battery Capacity: 1.3 Ah; Voltage: 24 V; Terminal Type: TAB; Approvals (V): EAC; Weight: 1099.3 g;
UPS-BAT/VRLA/24DC/3.4AH
SECONDARY; Chemical Composition: LEAD ABSORBENT GLASS MAT; Battery Capacity: 3.4 Ah; Voltage: 24 V; Terminal Type: SPECIAL; Height: 191 mm;
UPS-BAT-KIT-2X3X7AH
SECONDARY; Voltage: 12 V; Terminal Type: LEAD; Minimum Operating Temperature: 0 Cel; Weight: 17000 g; Height: 95 mm;
UPS-BAT-KIT-VRLA2X12V/7,2AH
SECONDARY; Battery Capacity: 7.2 Ah; Voltage: 24 V; Terminal Type: TAB; Length: 100 mm; Width: 132 mm;
UPS-BAT-KIT-6X7AH
SECONDARY; Voltage: 12 V; Terminal Type: WIRE; Weight: 17000 g; Minimum Operating Temperature: 0 Cel; Packing Method: BULK;
UPS-BAT-KIT-WTR2X12V/13AH
SECONDARY; Battery Capacity: 13 Ah; Voltage: 24 V; Terminal Type: SCREW; Weight: 11066 g; Height: 130 mm;
UPS-BAT/LI-ION/24DC/120WH/KIT
SECONDARY; Chemical Composition: LITHIUM-ION; Voltage: 24 V; Packing Method: BULK; Weight: 2550 g;
UPS-BAT-KIT-VRLA2X12V/12AH
SECONDARY; Battery Capacity: 12 Ah; Voltage: 24 V; Terminal Type: TAB; Height: 153 mm; Length: 100 mm;
UPS-BAT-KIT-3X7AH
SECONDARY; Voltage: 12 V; Terminal Type: LEAD; Minimum Operating Temperature: 0 Cel; Weight: 7210 g; Length: 295 mm;
UPS-BAT-KIT-WTR2X12V/26AH
SECONDARY; Battery Capacity: 26 Ah; Voltage: 24 V; Terminal Type: SCREW; Approvals (V): EAC; Minimum Operating Temperature: -25 Cel;
UPS-BAT-KIT-VRLA2X12V/3,4AH
SECONDARY; Battery Capacity: 3.4 Ah; Voltage: 24 V; Terminal Type: TAB; Weight: 2677 g; Length: 100 mm;
UPS-BAT-KIT-20X7AH
SECONDARY; Voltage: 12 V; Terminal Type: LEAD; Width: 65 mm; Height: 95 mm; Minimum Operating Temperature: 0 Cel;
UPS-BAT-KIT-2X6X7AH
SECONDARY; Voltage: 12 V; Terminal Type: LEAD; Height: 95 mm; Weight: 32000 g; Maximum Operating Temperature: 40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved