Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Phoenix Contact 2701362 is an Omni-Directional COAXIAL antenna with linear vertical polarization. It operates b/w -20°C to 65°C, ideal for mobile and multipoint communication systems. With a gain of 2 dB and beamwidths of 75° (E-plane) and 360° (H-plane), it's suitable for base station and broadcast transmission applications.
Median Price
$80.080
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$74.800
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$78.540
Mouser Electronics
RS (Exports)
$82.813
Verical
$136.710
TME
$101.880
Electro Sonic
$105.640
$75.480
$75.110
Vyrian
Dynamic Solutions
VNN
Nova Conductors
Shortec Electronics
ACDS - Activité Composants Distribution Service
Corohmni
$1.214
Aztec Data Supply Inc.
$2.250
Advanced Electronics
$2.551
$2.321
$2.092
AZTECH Wire
$17.824
Ampacity Inc.
$55.630
Semicontronic
$54.239
$53.961
Neutron USA
$176.660
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
This antenna can transmit and receive signals from all directions, making it ideal for applications where the signal source may be moving or located in various directions.
Coaxial construction provides good electrical performance and durability, ensuring reliable signal transmission in various environmental conditions.
Suitable for mobile systems and multipoint communication setups, allowing for efficient data transmission and reception in dynamic environments.
With a high maximum operating temperature, this antenna can withstand heat and operate efficiently in warmer conditions.
With a low minimum operating temperature, this antenna can function effectively in cold environments without the risk of freezing or malfunctioning.
Linear vertical polarization provides a consistent signal transmission/reception orientation, enhancing the antenna's performance in specific setups.
Designed for use in base stations and broadcast transmission applications, making it suitable for high-power and wide coverage scenarios.
With a standard 50 ohm characteristic impedance, this antenna is compatible with most RF/microwave systems, ensuring seamless integration.
The 2 dB gain helps amplify the signal strength, improving the antenna's communication range and overall performance.
With a wide 75° E-plane beamwidth, this antenna can cover a broad area in the vertical plane, enabling efficient signal transmission/reception.
The 360° H-plane beamwidth ensures complete coverage in the horizontal plane, making this antenna suitable for applications where signal reception from all directions is needed.
RF/Microwave Antennas 2701362 attributes and parameters. Explore more RF/Microwave Antennas devices from Phoenix Contact
Additional Features:
Application:
Beamwidth-E:
Beamwidth-H:
Characteristic Impedance:
Construction:
Gain:
Omni-Directional:
Maximum Operating Temperature:
Minimum Operating Temperature:
Polarization:
RF or Microwave Device Type:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
FDLL4148
Fairchild Semiconductor
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Itt Semiconductor
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
2118309-1
TE Connectivity's 2118309-1 is a RF/Microwave Antenna with 2 VSWR, LINEAR polarization, and 3.7 dB gain. Ideal for MOBILE STATION ANTENNA applications due to its 50 ohm impedance and PANEL MOUNT feature.
ANT3216LL00R2400A
Pulse Electronics
MOBILE STATION ANTENNA; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Minimum Operating Temperature: -40 Cel; Polarization: LINEAR;
AECW0801C03S-3000S
Abracon AECW0801C03S-3000S is a COAXIAL RF antenna with 50 ohm impedance. It operates b/w 698-960 MHz frequencies, suitable for 4G, GPS, and IoT applications. With VSWR of 3, it has linear polarization and can withstand temperatures from -40 to 85°C.
SPSPRDA2-P
Onsemi
The Onsemi SPSPRDA2-P is a COAXIAL RF antenna with 50 ohm impedance, operating from 865-928 MHz. It offers a VSWR of 2, elliptical polarization, and can withstand temperatures from -40 to 85 °C. Ideal for RF/Microwave applications requiring high-performance antennas.
BB-GA.110.101111
Advantech
RF/Microwave Antennas;
2195763-1
GPS ANTENNA; Mounting Feature: PANEL MOUNT; Maximum Voltage Standing Wave Ratio: 3; Polarization: CIRCULAR; Characteristic Impedance: 50 ohm;
W6103B0100
AEACMK0660746-SG4
Abracon's AEACMK0660746-SG4 GPS antenna offers 5dB gain, RHCP polarization, and 50 ohm impedance. Ideal for BEIDOU/GALILEO/GLONASS/GNSS/IOT applications with a frequency range of 1561-1602 MHz. Operating temperatures from -40 to 85°C make it suitable for various environments.
C30
MOBILE STATION ANTENNA;
PA.710.A
Taoglas
The Taoglas PA.710.A is an RF antenna with 3 VSWR, 5W power, and omni-directional capability. Ideal for mobile stations supporting 2G/3G/4G/LTE networks. Operating from -40°C to 85°C, it covers frequencies from 698 MHz to 960 MHz with a linear polarization design.
ACR0301U
ANT-LTE-CER-T
Linx Technologies
1002289F0-AA10L0100
KYOCERA AVX's 1002289F0-AA10L0100 RF/Microwave Antenna has a VSWR of 2.5, supports up to 2W transmission power, and operates b/w 698-960MHz. Ideal for cellular/IoT/LPWA applications with linear polarization and omni-directional coverage.
ACAG1204-433-T
Abracon's ACAG1204-433-T RF antenna has a 50 ohm impedance, 10 MHz bandwidth, and operates b/w -55°C to 125°C. It is omni-directional, suitable for IOT/ISM/RFID/SIGFOX/WIRELESS applications as a mobile station antenna with linear polarization. The ceramic-metal-sealed cofired construction features surface mounting.
8-2118903-1
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Polarization: LINEAR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 3;
TS.07.0113
TS.07.0113 by Taoglas is an Omni-Directional GPS antenna with 10W power, linear polarization, and coaxial construction. Ideal for GPS/GLONASS/BEIDOU applications, it operates b/w -40°C to 85°C with a frequency range of 1561-1610 MHz.
W1063M
2450AT42E0100E
Johanson Technology
MOBILE STATION ANTENNA; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
2240
Thales Components
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Maximum Transmission Power: 200 W; Maximum Voltage Standing Wave Ratio: 1.4; Maximum Operating Temperature: 70 Cel; Maximum Operating Frequency: 2170 MHz; Omni-Directional: NO;
AEACAD460065-S698
Abracon's AEACAD460065-S698 is a 50 ohm, 3 dB gain RF antenna with VSWR of 2. It operates from 698 MHz to 2700 MHz, suitable for mobile stations in 4G/IoT/LTE applications. This omni-directional linearly polarized coaxial antenna features panel mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Phoenix Contact
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved