Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Dynamic Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$23.472
Northwest PG Solutions
$25.820
$23.238
Assembly Products 1928369 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Plessey Semiconductors Discrete Components Div
Other Transistors;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
W4P
TE Connectivity
W4P by TE Connectivity is an assembly product for the DT SERIES, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wire sizes up to 0 AWG. Made of polybutylene terephthalate, it is ideal for various industrial and automotive electrical connections.
M85049/88-19W03
CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;
50058-8000
Molex
The Molex 50058-8000 is a female crimp contact with bellowed design, made of phosphor bronze. It has a finish thickness of 35 and supports wire sizes from 32 to 28 AWG. Ideal for use in applications requiring the 51021 housing with a min cable entry of 0.02 inch and max cable entry of 0.039 inch.
MUSB-2A111-024-BP
Amphenol
The Amphenol MUSB-2A111-024-BP is a dust cover made of silicone rubber with mounting options for #4-40 screws. It has a wide operating temperature range from -40°C to 105°C, making it suitable for various assembly applications. This product is ideal for protecting connectors in harsh environments.
AW3P
CONNECTOR ACCESSORY;
3505-29B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
RC16M23K
Souriau
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 15.75; IEC Conformity: NO; Design: SIGNAL; Additional Features: UNDER PLATING: NICKEL;
43030-0010
Molex 43030-0010 CONTACT features CRIMP terminal type, LOOSE contact design, and PHOSPHOR BRONZE material. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
AT60-16-0122
50394-8051
50394-8051 by Molex features crimp terminal type, bellowed contact design, and phosphor bronze material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 24 AWG. Suitable for straight mounting with a max cable entry of 0.055 inch.
61030012010
Harting Electronics & Kg
The Harting Electronics & Kg 61030012010 is a metal HOOD for D-SUB CONNECTOR. It has a max operating temp of 90°C and min of -20°C. Mounting options include SCREW (#4-40).
108-2
Keystone Electronics
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: BATTERY CONTACT; MIL Conformity: NO; Terminal Type: SOLDER;
1053251004
M85049/128-4
CONNECTOR ACCESSORY; Material: STEEL; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0;
08-55-0124
Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.
16-02-0115
Molex 16-02-0115 CONTACT features CRIMP terminals, suitable for 24-22 AWG wires. With a rated current of 3A and contact resistance of 15 mohm, it is ideal for applications requiring male connectors with SQUARE PIN-SOCKET style contacts. Operating temperature ranges from -40 to 120 °C.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
77138-001LF
Amphenol Communications Solutions
Amphenol's 77138-001LF CONTACT features CRIMP terminals for 30-26 AWG wires. With a PHOSPHOR BRONZE build, it offers FEMALE gender and BELLOWED style for STRAIGHT mounting. Ideal for Assembly Products, this contact has an 8 finish thickness.
SSH-003GA-P0.2-H
J S T Mfg
J S T Mfg's SSH-003GA-P0.2-H is a CRIMP terminal CONTACT with 32-28 AWG wire size range, rated for 1A current at 50V AC/DC. With approvals from CSA and UL, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts in straight mounting style.
828904-1
TE Connectivity 828904-1 CONTACT features CRIMP terminal type, 0.047" min cable entry, and -40 to 130°C operating temp range. Ideal for applications requiring STRAIGHT mounting style with 0 AWG wire size compatibility.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1928300599
Robert Bosch
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Minimum Cable Entry: .047 inch; Material: SILICONE; Assembly Item Name: SEALING ITEM;
1928498056
1928498056 by Robert Bosch is a CRIMP CONTACT for POWER applications. It features FEMALE contact gender, COPPER ALLOY material, and BLADE PIN-SKT style. Suitable for wire sizes ranging from 17 AWG to 20 AWG with a rated DC voltage of 40 V.
1928300601
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: DUMMY ITEM;
1-928918-1
TE Connectivity 1-928918-1 is a CRIMP male CONTACT with RND PIN-SKT style. Made of PHOSPHOR BRONZE, it's used in Assembly Products for STRAIGHT mounting applications.
1928343
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: JUMPER; Insulator Material: POLYAMIDE; IEC Conformity: NO; Material: COPPER ALLOY;
1928356
1928372
1928385
1928398
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1928398;
1928408
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1928408;
1928411
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1928411;
1928424
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1928424;
1928437
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1928437;
1928495
1928521
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: PROTECTIVE COVER; MIL Conformity: NO; Manufacturer Series: 1928521;
1928060000
Weidmueller & Kg
1928070000
1928080000
1928110000
1928130000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved