Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY;
Median Price
$411.235
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$821.790
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$0.680
Nova Conductors
$0.575
Shortec Electronics
VNN
ACDS - Activité Composants Distribution Service
Dynamic Solutions
Vyrian
Abianca Electronics
$0.514
$0.494
Netroflash
$0.563
Ampacity Inc.
$0.740
AZTECH Wire
$11.627
Argo Parts USA
Continental Prestige Electronics
Assembly Products 1213205 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
1213205 Connector Accessories trade compliance attributes, and parameters.
NSN
5975-25-694-0390, 5975256940390
NIIN
256940390
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
261
Deltrol Controls
Other Relays;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
90119-0109
Molex
Molex 90119-0109 CONTACT features CRIMP terminal type, suitable for 24-22 AWG wires. Made of PHOSPHOR BRONZE with 0.168" length, it has FEMALE gender and SQUARE PIN-SOCKET style. Ideal for applications requiring 0.04-0.058" cable entry, such as assembly products needing a STRAIGHT mounting style.
43030-0005
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
39-00-0060
Molex 39-00-0060 CONTACT features CRIMP terminal type, 0.051" min cable entry, and PHOSPHOR BRONZE material. Ideal for 5557, 30067, 42474, 44516 SERIES HOUSING applications with FEMALE contact gender and SQUARE PIN-SOCKET design.
M39029/1-102
TE Connectivity
TE Connectivity's M39029/1-102 contact is MIL conformant with operating temperatures from -65 to 200°C. Featuring a wire gauge of 14 AWG, it has a cross-section area of 2.5 mm² and is made of brass. This male contact is designed for straight mounting applications.
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
1375819-1
TE Connectivity's 1375819-1 CONTACT features CRIMP terminal type, rated voltage of 250V, and wire gauge of 22 AWG. Ideal for SIGNAL design applications with a max operating temperature of 105°C and rated current of 4A.
3036916
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): UL; DIN Conformity: NO; Material: COPPER; IEC Conformity: NO;
281934-2
TE Connectivity 281934-2 is a SEALING ITEM with Silicone material. It has a max operating temp of 130°C and min of -40°C. Supports up to 0 AWG wire size and 2.4" cable entry, ideal for various assembly applications.
3030514
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END COVER; DIN Conformity: NO;
HDC26-24
TE Connectivity's HDC26-24, part of the HD SERIES, features a max operating temperature of 125°C and min of -55°C. With a max wire size of 0 AWG, it is a female contact assembly item made of plastic. Ideal for applications requiring durable connectors in extreme temperature conditions.
206966-9
TE Connectivity 206966-9 is an Assembly Product with 13 shell sizes. It supports up to 0 AWG wire size and features a STRAIGHT mounting style. Made of POLYETHYLENE, it offers SCREW mounting options and is ideal for applications requiring 3/4-20 UNEF-2B compatibility.
1060-20-0122
TE Connectivity's 1060-20-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 AWG to 16 AWG, rated for 7.5A current. Ideal for power applications with male gender and straight mounting style.
793-5503
MTCB1X-105-XXX
TE Connectivity's MTCB1X-105-XXX is an Assembly Product with a max operating temperature of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, and features male contact gender. Ideal for applications involving round wire due to its Polyarylene/Polyethylene material composition.
1-104480-6
TE Connectivity 1-104480-6 is a CRIMP terminal with 300V rated voltage, suitable for DISCRETE WIRE cables. Featuring a contact resistance of 12 mohm, it has a max operating temperature of 105°C and is approved by CSA and UL for various applications in POWER AND SIGNAL designs.
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
3505-29B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
SAN-002T-0.8A
J S T Mfg
SAN-002T-0.8A by J S T Mfg is a CRIMP terminal with approvals from CSA and UL, rated for 2A current at 250V AC/DC. It is used in SAN CONNECTOR applications, supporting wire sizes from 30 to 24 AWG with a temperature range of -25 to 85°C.
16-02-0077
CONNECTOR ACCESSORY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
121348-0100
ITT Cannon
1-2133341-2
Assembly Items; Minimum Operating Temperature: -40 Cel; Contact Gender: FEMALE; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG; Mounting Style: STRAIGHT;
121347-0100
1213200
1213201
TERMINAL BLOCK ACCESSORY; Approvals (V): CSA; UL; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; Maximum Operating Temperature: 105 Cel;
1213202
1213203
1213204
1213206
1213207
1213852
1213854
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved