Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: MARKER STRIP; MIL Conformity: NO; IEC Conformity: NO;
Median Price
$2.430
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$0.829
100+ parts
$0.711
1k+ parts
$0.682
10k+ parts
-
Mouser Electronics
DigiKey
Arrow
RS Americas
$2.880
$2.270
$2.160
Element14
$3.910
$3.080
$2.740
RS (Exports)
Verical
$3.103
Master Electronics
Conrad
$1.749
TodayComponents
$1.430
$1.130
Quotebeam
$2.930
Carlton-Bates
$2.970
Shortec Electronics
Dynamic Solutions
Omnical
IBS Electronics
$3.426
ACDS - Activité Composants Distribution Service
Powertech Controls
Native Components
$7.810
Northwest PG Solutions
$8.591
$7.732
Authorized Procurement Solutions
Perfect Parts
Assembly Products 1051016:0021 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Rectron
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
08-55-0101
Molex 08-55-0101 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with compression style in straight mounting. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 15.
2414-002-1886
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
MTCB2X-XXX-205
TE Connectivity's MTCB2X-XXX-205 is an Assembly Product for ROUND WIRE applications. It features a max operating temp of 125°C, min operating temp of -65°C, and supports up to 0 AWG wire size. With a rated current of 1.5A, this male contact connector is made of polyarylene/polyethylene material.
50394-8051
50394-8051 by Molex features crimp terminal type, bellowed contact design, and phosphor bronze material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 24 AWG. Suitable for straight mounting with a max cable entry of 0.055 inch.
DTP06-2S-C017
TE Connectivity's DTP06-2S-C017 is a FEMALE power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for applications requiring high-power transmission in harsh environments.
4-745287-7
TE Connectivity 4-745287-7 CONTACT features SOLDER terminals, BRASS material, and SIGNAL design. With a max wire size of 0 AWG and rated current of 3.1 A, it is ideal for MALE connectors in applications requiring a temp range from -55 to 105 °C.
13711548
Aptiv
Aptiv 13711548 CONTACT features FEMALE gender, CRIMP terminal type, and COPPER ALLOY material. Ideal for FLRY-B cable types with 0.0669-0.0827 inch cable entry. Used in Assembly Products applications.
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
M83513/05-07
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;
5-962885-1
TE Connectivity 5-962885-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 22 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and cable entry from 0.043" to 0.063", operating b/w -40°C to 140°C temperature range.
DF11-2428SCFA(04)
Hirose Electric
CONNECTOR ACCESSORY;
ZX360-B-10S-UNIT(30)
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
39-00-0223
Molex 39-00-0223 contact is designed for 5559, 30068, and 42475 series housings. It features a crimp terminal type with a square pin-socket contact design. Made of phosphor bronze, it supports up to 16 AWG wire size and has a 0.122" max cable entry.
10757690
Delphi Connection Systems
112264-ZZ
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0;
249-117
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: END STOP; MIL Conformity: NO;
MTCB1X-XXX-105
CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Wire Size: 0 AWG;
DE-24657
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Material: METAL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: JUNCTION SHELL; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1051430
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
1051016:0101
1051016:0001
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: MARKER STRIP; DIN Conformity: NO; MIL Conformity: NO;
1051016:0011
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: MARKER STRIP; MIL Conformity: NO;
1051029:0101
1051003
TERMINAL BLOCK ACCESSORY; Approvals (V): UL; MIL Conformity: NO; IEC Conformity: NO; Material: PA; Maximum Operating Temperature: 100 Cel;
1051029:0151
1051016:0131
1051016:0311
1051029:0001
1051016:0141
1051016:0061
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: MARKER STRIP; DIN Conformity: NO;
1051016:0161
1051016:0051
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKER STRIP;
1051016:0151
1051016:0171
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: MARKING ITEM; MIL Conformity: NO; IEC Conformity: NO;
1051016
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; DIN Conformity: NO; Assembly Item Name: MARKING ITEM; Approvals (V): UL;
1051016:0081
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: MARKER STRIP;
1051016:0031
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MARKER STRIP; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO;
105-101-208-100
Edac
CONNECTOR ACCESSORY; Rated Current: 5 A; Mounting Style: RIGHT ANGLE; Contact Style: BELLOWED CONTACT; Contact Gender: FEMALE; Contact Design: STRIP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved