Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$39.173
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Mobius Materials
1+ parts
$7.500
100+ parts
$6.040
1k+ parts
-
10k+ parts
Vyrian
Chip Stock
Anansix
ComSIT Distribution GmbH
ComSIT USA
Digital Electronic Gebert Verwaltungs UG
Digiode
ACDS - Activité Composants Distribution Service
Nova Conductors
Fibra_Brandt Electronic GMBH
Kiltronic GmbH
Q Components
LWI Electronics Inc
Micros
$43.770
Partservice
$37.480
Micros sp.j. W. Kędra i J. Lic
$40.148
Pegasus Components GmbH
Sinequanon
Ampacity Inc.
$3.500
Corohmni
$6.016
AZTECH Wire
$7.175
Aztec Data Supply Inc.
$12.730
Semicontronic
$18.500
$18.038
$17.945
One Stop Electronics
$30.500
Lixinc
Kepictronics
UNI Independent Distributors
Continental Prestige Electronics
Perfect Parts
Corphita
Bastille Electronics
Assy Fe
Benley Electronics
Futuretech Components
Argo Parts USA
Schahn Electronic Components
Authorized Procurement Solutions
Graphics Display Drivers SAA1064T attributes and parameters. Explore more Graphics Display Drivers devices from Philips Semiconductors
Additional Features:
Display Mode:
JESD-30 Code:
No. of Digits/Characters:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
SAA1064T Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-14-489-2616, 5962144892616
NIIN
144892616
In September 2006, Philips completed the sale of an 80.1% stake in Philips Semiconductors to a consortium of private equity investors consisting of KKR, Bain Capital, Silver Lake Partners, Apax Partners and AlpInvest Partners. The new company name NXP (from Next eXPerience) was announced on August 31, 2006, and the company was officially launched during the Internationale Funkausstellung (IFA) consumer electronics show in Berlin. The newly independent NXP was ranked as one of the world's top 10 semiconductor companies
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Pro-an Electronic
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LT3599EFE#PBF
Analog Devices
Analog Devices' LT3599EFE#PBF is a LED display driver with 40 segments, operating at 3.1-30V. Ideal for automotive applications, it has a temp range of -40 to 125°C and small outline package style. With dual terminal position and matte tin finish, it offers high performance in a compact form factor.
LM3554TME/NOPB
LM3554TME/NOPB by Texas Instruments is a graphics display driver with 2 channels. It operates b/w -30 to 85°C, with a supply voltage range of 2.5-5.5V. Ideal for LED display drivers, it features constant-current output and a serial data input mode.
MC14489BPE
Freescale Semiconductor
LED DISPLAY DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Package Style (Meter): IN-LINE;
LP5523TMX/NOPB
LP5523TMX/NOPB by Texas Instruments is a graphics display driver with 9 channels, constant-current output, and serial data input mode. It operates b/w -30 to 85 °C with a supply voltage range of 0-5.5 V. Ideal for LED displays, it features multiplexed display capability and a thin profile grid array package style.
PTPS92662AQPHPRQ1
Texas Instruments PTPS92662AQPHPRQ1 is a 48-terminal LED display driver with serial data input mode. It operates in automotive temperature grades (-40 to 125°C) and supports up to 12 channels and segments. This square-shaped, surface-mountable IC has a max supply voltage of 60V, making it ideal for automotive graphics display applications.
ICM7218BIJI
General Electric Solid State
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
MAX16834AUP/V+T
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
PCF8562TT/2,518
NXP Semiconductors
PCF8562TT/2,518 by NXP Semiconductors is a 48-terminal graphics display driver with dot matrix mode and serial data input. It operates at a voltage range of 1.8V to 5.5V, suitable for industrial applications requiring multiplexed display capability in a compact rectangular package style.
MAX6950CEE+
MAX6950CEE+ by Analog Devices is a Graphics Display Driver with 5-DIGIT display, 8 segments, and 16 terminals. It operates on a supply voltage range of 2.7V to 5.5V and has a max operating temperature of 70°C. Ideal for LED displays, it features serial data input mode and segment display capability.
MP3301GJ-Z
Monolithic Power Systems
MP3301GJ-Z by Monolithic Power Systems is a graphics display driver with a max supply voltage of 6V. It has a small outline, very thin profile package style and is suitable for automotive applications. With 10 segments and a nominal voltage of 5V, it is an ideal choice for LED display driver interface ICs.
AL5809-90P1-7
Diodes Incorporated
Diodes Inc.'s AL5809-90P1-7 LED display driver has a max supply voltage of 60V, min supply voltage of 2.5V, and operates in automotive-grade temperature range (-40 to 125°C). It is a surface-mount package with dual terminals suitable for graphics displays applications.
LT3756EUD-1#TRPBF
LT3756EUD-1#TRPBF by Analog Devices is a graphics display driver with a max supply voltage of 100V. It has 16 terminals and operates in temperatures ranging from -40 to 125°C. This LED display driver is commonly used in automotive applications.
CL6K4-G
Supertex
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; JESD-30 Code: R-XSSO-G3; No. of Segments: 1;
LT3763IFE#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
PCA9955BTWJ
PCA9955BTWJ by NXP Semiconductors is a graphics display driver with 28 terminals and a small outline, thin profile package style. It operates at temperatures ranging from -20 to 85 °C and has a moisture sensitivity level of 1. This LED display driver is suitable for various applications requiring precise control of graphics displays.
AL8805W5-7
AL8805W5-7 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. It has a small outline package style, suitable for automotive applications due to its wide temperature range of -40 to 125°C. The terminal finish is matte tin with dual position gull wing terminals.
ICL8105XUMA2
Infineon Technologies
ICL8105XUMA2 by Infineon Technologies is a graphics display driver with a max supply voltage of 24V. It has 8 terminals and operates in temperatures ranging from -40 to 85°C. This LED display driver is commonly used in industrial applications.
LM3915N-1
LM3915N-1 by Texas Instruments is a LED display driver with 10-digit segments. It operates b/w 3V to 25V, suitable for bar graph displays in commercial applications. With a rectangular package style and through-hole terminal form, it offers parallel data input mode and can withstand temperatures from 0°C to 70°C.
NSVD4001DR2G
NSVD4001DR2G by Onsemi is a Graphics Display Driver with 8 terminals, operating temperature range of -40 to 125°C, and supply voltage of 12V. It is ideal for automotive applications due to its small outline package style and LED display driver interface IC type.
LM3406HVMHX/NOPB
LM3406HVMHX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. It is designed for automotive applications, featuring AEC-Q100 screening level and operating temperature range from -40 to 125°C. This small outline package has 14 terminals, matte tin finish, and gull wing terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SAA1064T/N2,112
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
SAA1064T/N2,118
SAA1064T/N2
SAA1064T
SAA1064/N2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
SAA1064/N2,112
SAA1064/N2,112 by NXP Semiconductors is a 24-terminal LED display driver with segment display mode and serial data input. It operates b/w -40 to 85 °C with a supply voltage range of 4.5-15 V, making it ideal for industrial applications requiring multiplexed displays.
SAA1064TD
Philips Semiconductors
SAA1064TD-T
SAA1064PN
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
SAA1064
SAA1064N
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved