Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Operating Temperature: 300 Cel;
Median Price
$0.453
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
Vyrian
Donberg Electronics Ltd
Anansix
Digiode
Aranea Global
$0.444
$0.426
Argo Parts USA
$0.439
Continental Prestige Electronics
Modulus Dynamics
$1.648
Corohmni
$2.171
Aztec Data Supply Inc.
$2.690
One Stop Electronics
$6.500
Semicontronic
$6.338
$6.305
Ampacity Inc.
$7.500
AZTECH Wire
$8.337
Lixinc
UNI Independent Distributors
Perfect Parts
Robosynatics
Lucentia Tech
$2.422
$2.372
Corphita
Other Function Sensors & Transducers KTY84/130 attributes and parameters. Explore more Other Function Sensors & Transducers devices from Philips Semiconductors
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Sub-Category:
Temperature Coef (ppm/Cel):
Terminal Finish:
In September 2006, Philips completed the sale of an 80.1% stake in Philips Semiconductors to a consortium of private equity investors consisting of KKR, Bain Capital, Silver Lake Partners, Apax Partners and AlpInvest Partners. The new company name NXP (from Next eXPerience) was announced on August 31, 2006, and the company was officially launched during the Internationale Funkausstellung (IFA) consumer electronics show in Berlin. The newly independent NXP was ranked as one of the world's top 10 semiconductor companies
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
25250202100011
Wuerth Elektronik & Kg
Wurth Elektronik's 25250202100011 sensor measures humidity and temperature. With a supply voltage range of 1.7V to 3.6V, it operates b/w -40°C to 120°C. This square-shaped sensor with six terminals is ideal for surface mount applications due to its compact size (2" x 2mm x 0.9mm).
HLSR50-P/SP33
Lem International Sa
Other Sensors/Transducers;
TMCS1101A2UQDRQ1
Texas Instruments
TMCS1101A2UQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, operates b/w -40 to 125°C, and has a compact rectangular package suitable for surface mount assembly.
ADXRS645HDYZ
Analog Devices
GYROSCOPE;
ACS72981ELRATR-200B5
Allegro MicroSystems' ACS72981ELRATR-200B5 is a current sensor with 7 terminals, operating b/w -40°C to 85°C. It offers analog voltage output, suitable for AEC-Q100 applications in automotive systems. The sensor has a package size of 6.4mm x 4.8mm x 1.5mm and operates within a supply voltage range of 4.5V to 5.5V.
LM71CIMFX/NOPB
National Semiconductor
Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Package Equivalence Code: TSOP5/6,.11,37;
ACS780LLRTR-050B-T
Allegro MicroSystems' ACS780LLRTR-050B-T is a current sensor with 7 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C in a surface-mount package measuring 6.4mm x 4.8mm x 1.5mm.
ACS724LLCTR-10AB-T
Allegro MicroSystems' ACS724LLCTR-10AB-T is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, BICMOS technology, and operates b/w -40°C to 150°C temperature range. Ideal for surface mount installations in various electronic systems.
ACS37002LMCATR-050B5
Allegro MicroSystems' ACS37002LMCATR-050B5 is a current sensor with 16 terminals, offering an output range of 0.5-4.5V. It operates b/w -40 to 150°C and supports supply voltages from 4.5V to 5.5V, making it ideal for automotive applications due to its AEC-Q100 screening level certification.
IVT-S-300-U0-I-CAN2-12/24
Isabellenhuette Heusler & Kg
CURRENT SENSOR;
NJR4266F2A1
New Japan Radio
SENSOR MODULE;
ACS711ELCTR-25AB-T
ACS711ELCTR-25AB-T by Allegro MicroSystems is a current sensor with 3-5.5V supply, 4.6us response time, and -40 to 85°C operating range. It has single-ended output for surface mount applications in various industries like automotive and industrial automation.
G-TPMO-104
Other Sensors/Transducers; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 85 Cel; Body Length/Diameter: 9.1 mm;
3030
Lambda Advanced Analog
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 14; Package Shape or Style: RECTANGULAR; Package Equivalence Code: DIP14,.3; Maximum Operating Temperature: 100 Cel;
ACS37002LMABTR-066B3
ACS37002LMABTR-066B3 by Allegro MicroSystems is a current sensor with 16 terminals, outputting analog voltage in the range of 0.3-3.0V. It operates b/w -40 to 150°C, suitable for automotive applications due to AEC-Q100 screening and plastic package material. The sensor has a rectangular shape, measuring 10.3mm in length and 2.35mm in height for surface mount installation.
1230-015A-3L
Ic Sensors
ACS37003KMCATR-120B3
ACS780LLRTR-100U-T
Allegro MicroSystems' ACS780LLRTR-100U-T is a current sensor with 7 terminals, operating from -40 to 150°C. It offers analog voltage output, suitable for AEC-Q100 applications. With a package size of 6.4mm x 4.8 inch x 1.5mm and BICMOS technology, it's ideal for surface mount installations in automotive electronics.
TMCS1107A4BQDRQ1
TMCS1107A4BQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, operates b/w -40 to 125°C, and features surface mounting for easy installation in various systems.
ACS722LLCTR-10AB-T
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KTY83/122,113
The NXP Semiconductors KTY83/122,113 is a 2-terminal sensor with a plastic/epoxy package. It has a temperature range of -55 to 175°C and a positive temperature coefficient of ppm/°C. This sensor is commonly used in through-hole mounting applications.
KTY83/122
Philips Semiconductors
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; JESD-609 Code: e3; Temperature Coef (ppm/Cel): POSITIVE; Minimum Operating Temperature: -55 Cel;
KTY83/122T/R
NXP Semiconductors' KTY83/122T/R is a 2-terminal sensor with temp coef of +ppm/°C, operating from -55 to 175 °C. Its PLASTIC/EPOXY package makes it ideal for through-hole mounting in various applications like temperature monitoring systems.
KTY83/110
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Maximum Operating Current: 1 mA; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 175 Cel;
KTY83/110T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Maximum Operating Temperature: 175 Cel; Package Body Material: PLASTIC/EPOXY;
KTY84/150
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
KTY83/120,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Equivalence Code: DO-34/DO-204AG; Maximum Operating Temperature: 175 Cel; Package Body Material: PLASTIC/EPOXY;
KTY83/120T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Body Material: PLASTIC/EPOXY; Temperature Coef (ppm/Cel): POSITIVE; Minimum Operating Temperature: -55 Cel;
KTY83/121,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: DO-34/DO-204AG; Temperature Coef (ppm/Cel): POSITIVE;
KTY83/121T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: DO-34/DO-204AG; Maximum Operating Temperature: 175 Cel;
KTY83/150,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Equivalence Code: DO-34/DO-204AG; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -55 Cel;
KTY83/150T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Package Equivalence Code: DO-34/DO-204AG; Package Body Material: PLASTIC/EPOXY;
KTY83/151,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: DO-34/DO-204AG;
KTY83/151T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Maximum Operating Temperature: 175 Cel; Minimum Operating Temperature: -55 Cel;
KTY84/151T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Package Equivalence Code: DO-34/DO-204AG; Maximum Operating Temperature: 300 Cel;
KTY83/121
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Maximum Operating Current: 1 mA; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel;
KTY83/150
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Equivalence Code: DO-34/DO-204AG; JESD-609 Code: e3; Minimum Operating Temperature: -55 Cel;
KTY83/151
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -55 Cel; Maximum Operating Current: 1 mA; Maximum Operating Temperature: 175 Cel;
KTY84/151
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Maximum Operating Temperature: 300 Cel;
KTY84-152
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Maximum Operating Temperature: 300 Cel; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved