Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: DO-34/DO-204AG; Maximum Operating Temperature: 175 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
One Stop Electronics
$41.750
Ampacity Inc.
UNI Independent Distributors
Corphita
Other Function Sensors & Transducers KTY83/121T/R attributes and parameters. Explore more Other Function Sensors & Transducers devices from NXP Semiconductors
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Sub-Category:
Temperature Coef (ppm/Cel):
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Protek Devices
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Good-ark Electronics
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Panjit International
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ACS720KLATR-15AB-T
Allegro MicroSystems
ACS720KLATR-15AB-T by Allegro MicroSystems is a current sensor with 16 terminals, operating b/w -40°C to 125°C. It offers analog voltage output, with a supply voltage range of 4.5V to 5.5V. This rectangular sensor, made of plastic, is ideal for surface mount applications in various industries.
HAFUHT0300L4AXT
Honeywell Sensing And Control
Honeywell Sensing And Control's HAFUHT0300L4AXT is a MASS AIR FLOW SENSOR with 3-10V supply voltage range, 3.5% accuracy, and digital output. Ideal for PANEL MOUNT applications, it operates b/w -20°C to 70°C temperatures with a compact body size of 71.4mm x 35 inch.
MPX4250D
National Semiconductor
Other Sensors/Transducers;
FC2231-0000-0100-L
TE Connectivity
TE Connectivity's FC2231-0000-0100-L is a force sensor with a max supply voltage of 5V and an accuracy of 1%. It operates in temperatures ranging from -40°C to 85°C, providing an output range of 0.5-4.5V. This sensor is commonly used for measuring force in various applications.
TMCS1108A4UQDRQ1
Texas Instruments
TMCS1108A4UQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V, and AEC-Q100 screening. It outputs analog voltage and operates b/w -40 to 125°C. Ideal for automotive applications due to its surface mount package and high temperature range suitability.
3.000.609
Sensirion Ag
3.000.609 by Sensirion Ag is a MASS AIR FLOW SENSOR with 4 terminals, operating b/w -20°C to 80°C. It has a digital output at 5.5V max supply voltage and 2.7V min supply voltage, offering up to 4% accuracy for various applications in the field of function sensors and transducers.
NJR4266F3C2
NISSHINBO MICRO DEVICES INC
86-015G-R
Ic Sensors
SNG-SPRC-002
SPEED SENSOR;
ISM330ISNTR
STMicroelectronics
ACCELEROMETER/GYROSCOPE;
SCD42-D-R2
SCD42-D-R2 by Sensirion Ag is a gas sensor with 21 terminals. It operates b/w -10°C to 60°C, providing digital output. With a max accuracy of 9%, it is suitable for surface mount applications in various industries.
HTB50-P
Lem International Sa
HTB50-P by Lem International Sa is a CURRENT SENSOR with 4 terminals, outputting -4-4V analog voltage. It operates b/w -40 to 80°C, with a body size of 11"x39mm and height of 32.5mm. Ideal for applications requiring precise current measurement in industrial settings.
HTFS200-P
CURRENT SENSOR;
TMCS1101A3BQDRQ1
TMCS1101A3BQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, operates b/w -40 to 125°C, and has a compact rectangular package ideal for surface mount installations.
ACS732KLATR-75AB-T
Allegro MicroSystems' ACS732KLATR-75AB-T is a current sensor with 4.75-5.25V supply voltage range, AEC-Q100 screening, and -40 to 125°C operating temperature. Ideal for automotive applications due to its open-drain analog voltage output and compact rectangular package design for surface mounting.
CAB500-C/SP5-001
ACS724LLCTR-50AB-T
Allegro MicroSystems' ACS724LLCTR-50AB-T is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, BICMOS technology, and operates b/w -40°C to 150°C. Ideal for surface mount installations in automotive systems requiring precise current monitoring.
AT5B10
TRANSDUCER;
3.000.521
GAS SENSOR;
3025
Honeywell International
SPEED SENSOR; No. of Terminals: 2; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 11 mm; Maximum Operating Temperature: 107 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KTY84/130
Philips Semiconductors
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Operating Temperature: 300 Cel;
KTY83/122,113
The NXP Semiconductors KTY83/122,113 is a 2-terminal sensor with a plastic/epoxy package. It has a temperature range of -55 to 175°C and a positive temperature coefficient of ppm/°C. This sensor is commonly used in through-hole mounting applications.
KTY83/122
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; JESD-609 Code: e3; Temperature Coef (ppm/Cel): POSITIVE; Minimum Operating Temperature: -55 Cel;
KTY83/122T/R
NXP Semiconductors' KTY83/122T/R is a 2-terminal sensor with temp coef of +ppm/°C, operating from -55 to 175 °C. Its PLASTIC/EPOXY package makes it ideal for through-hole mounting in various applications like temperature monitoring systems.
KTY83/110
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Maximum Operating Current: 1 mA; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 175 Cel;
KTY83/110T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Maximum Operating Temperature: 175 Cel; Package Body Material: PLASTIC/EPOXY;
KTY84/150
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
KTY83/120,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Equivalence Code: DO-34/DO-204AG; Maximum Operating Temperature: 175 Cel; Package Body Material: PLASTIC/EPOXY;
KTY83/120T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Body Material: PLASTIC/EPOXY; Temperature Coef (ppm/Cel): POSITIVE; Minimum Operating Temperature: -55 Cel;
KTY83/121,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: DO-34/DO-204AG; Temperature Coef (ppm/Cel): POSITIVE;
KTY83/150,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Equivalence Code: DO-34/DO-204AG; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -55 Cel;
KTY83/150T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Package Equivalence Code: DO-34/DO-204AG; Package Body Material: PLASTIC/EPOXY;
KTY83/151,113
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: DO-34/DO-204AG;
KTY83/151T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Maximum Operating Temperature: 175 Cel; Minimum Operating Temperature: -55 Cel;
KTY84/151T/R
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Package Equivalence Code: DO-34/DO-204AG; Maximum Operating Temperature: 300 Cel;
KTY83/120
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Maximum Operating Current: 1 mA; Terminal Finish: Matte Tin (Sn); Package Equivalence Code: DO-34/DO-204AG;
KTY83/121
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Maximum Operating Current: 1 mA; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel;
KTY83/150
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Equivalence Code: DO-34/DO-204AG; JESD-609 Code: e3; Minimum Operating Temperature: -55 Cel;
KTY83/151
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Minimum Operating Temperature: -55 Cel; Maximum Operating Current: 1 mA; Maximum Operating Temperature: 175 Cel;
KTY83-152
Other Sensors/Transducers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; JESD-609 Code: e0; Minimum Operating Temperature: -55 Cel; Maximum Operating Current: 1 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved