Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic EEHZC1J220XP is a 22uF aluminum electrolytic capacitor with 63V URdc. It features 0.08 Tan Delta, 90mA Ripple Current, and -55 to 125°C operating temperature range. Ideal for automotive applications meeting AEC-Q200 standard.
Median Price
$0.750
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Element14
1+ parts
$1.068
100+ parts
$0.801
1k+ parts
$0.756
10k+ parts
$0.734
Mouser Electronics
$1.100
$0.486
$0.336
-
DigiKey
$1.110
$0.485
Newark
$1.380
$0.656
$0.526
$0.494
Future Electronics
$0.395
Chip1Stop
$0.702
Master Electronics
$0.700
Verical
$0.882
$0.824
Farnell
$0.373
$0.296
TTI
$0.323
Arrow
$0.329
$0.327
Bristol Electronics
$0.938
$0.347
$0.244
TME
$1.060
$0.650
Nova Conductors
$1.160
IBS Electronics
$0.421
$0.414
Electro Sonic
$0.846
$0.768
Vyrian
Sensible Micro Corp
NAC Semi
$1.010
$0.918
Schukat
$0.615
$0.534
GES GmbH
Aztec Data Supply Inc.
$0.140
Semicontronic
$0.222
$0.216
$0.215
Ampacity Inc.
Advanced Electronics
$0.345
$0.328
Corohmni
$0.463
Argo Parts USA
$1.049
Netroflash
$1.102
$1.079
Eastek
$0.660
GreenTree Electronics
Robosynatics
Lucentia Tech
$0.391
$0.383
Abacus Technologies
Continental Prestige Electronics
$0.890
$0.564
Perfect Parts
Solid polymer dielectric material offers improved reliability and stability compared to traditional electrolytic capacitors.
Low tan delta indicates low dissipation factor, meaning this capacitor has better energy efficiency and lower heat generation.
Low leakage current ensures minimal power loss and better performance in high-precision applications.
High ripple current rating allows the capacitor to handle fluctuations in input voltage effectively.
Surface-mount technology makes this capacitor suitable for automated assembly processes, saving time and effort during production.
High operating temperature range ensures the capacitor can withstand harsh environmental conditions and maintain performance.
Suitable capacitance value for various applications, providing good filtering and energy storage capabilities.
High rated voltage allows this capacitor to be used in a wide range of electronic circuits without risk of breakdown.
Fixed Capacitors EEHZC1J220XP attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Additional Features:
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Shape:
Width:
EEHZC1J220XP Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Protek Devices
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Baneasa S A
TMK107BJ105KA-T
Taiyo Yuden
TMK107BJ105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
CC0402MRX5R5BB106
Yageo
Yageo's CC0402MRX5R5BB106 is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C, ideal for surface mount applications in electronics requiring compact components with high capacitance stability.
C1206C102KGRACAUTO
KEMET Corporation
C1206C102KGRACAUTO by KEMET Corp is a rectangular package ceramic capacitor with a capacitance of 0.001 uF and rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
CGA2B2X7R1E103K050BA
TDK
TDK's CGA2B2X7R1E103K050BA is a ceramic capacitor with capacitance of 0.01uF, rated at 25V DC. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
EEUFC1J101
Panasonic
Panasonic EEUFC1J101 is a 100uF aluminum electrolytic capacitor with 63V rated DC voltage. It features low tan delta of 0.08 and leakage current of 0.063mA, suitable for AEC-Q200 automotive applications due to its high ripple current capability of 347.75mA.
08055C105K4T2A
KYOCERA AVX
08055C105K4T2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 50V URdc, X7R temp code, and -55 to 125 °C operating range. Ideal for automotive applications due to AEC-Q200 standard compliance and compact size for surface mount installation.
940C8W2P2K-F
Cornell Dubilier Electronics
The Cornell Dubilier Electronics 940C8W2P2K-F is a film capacitor with 2.2uF capacitance, rated for 850V DC and 450V AC. It features a ripple current of 18400mA, ESR of 3mohm, and operates b/w -55°C to 105°C. Ideal for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
GRM155R61E105KA12D
Murata Manufacturing
Murata Manufacturing's GRM155R61E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C5750X6S2W225K250KA
C5750X6S2W225K250KA by TDK is a ceramic capacitor with 2.2uF capacitance and 450V rated DC voltage. It has X6S temperature characteristics, -55 to 105 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high reliability and performance.
EEEFK1H101P
Panasonic EEEFK1H101P is a 100uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 262.5mA, suitable for automotive applications meeting AEC-Q200 standard. With -55 to 105 °C operating range, it's ideal for surface mount designs requiring compact cylindrical package.
CGA3E1X7R1C105K080AC
TDK's CGA3E1X7R1C105K080AC is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 16V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package.
EEEFK1V470P
Panasonic EEEFK1V470P is a 47uF aluminum electrolytic capacitor with 35V rated DC voltage. It has a tan delta of 0.12 and ripple current of 180mA, suitable for surface mount applications in automotive electronics due to AEC-Q200 compliance.
EEEFPV101XAP
Panasonic EEEFPV101XAP is a 100uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.035mA, and ripple current of 390mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
GRM155R71E104KE14D
Murata Manufacturing's GRM155R71E104KE14D is a ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications due to its compact rectangular package design.
C0603C104K4RACTU
KEMET Corporation's C0603C104K4RACTU is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
04023C103KAT2A
04023C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, rated at 25V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for compact electronic devices requiring stable performance in harsh environments. Its multi-layer design and wraparound terminals ensure reliable connectivity and space-saving installation.
GCM21BR71E225KA73L
Murata Manufacturing's GCM21BR71E225KA73L is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
MAL202137101E3
Vishay Intertechnology's MAL202137101E3 is a 100uF aluminum electrolytic capacitor with 40V URdc. It features a tan delta of 0.11, leakage current of 0.012mA, and ripple current of 190mA, making it ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 85°C.
EEEFTV151XAP
Panasonic EEEFTV151XAP is a 150uF aluminum electrolytic capacitor with 35V URdc. It has low Tan Delta of 0.12 and high Ripple Current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
EEEFT1H470AP
Panasonic EEEFT1H470AP is a 47uF aluminum electrolytic capacitor with 50V URdc. It has low Tan Delta of 0.1 and high Ripple Current of 126.75mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and wide operating temperature range from -55°C to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EEHZA1H101P
Panasonic EEHZA1H101P is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 28mohm, -55 to 105 °C operating temp range, and AEC-Q200 standard compliance. Ideal for SMT applications requiring high ripple current handling up to 300mA.
EEHZA1H220P
Panasonic EEHZA1H220P is a 22uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 80mohm, suitable for AEC-Q200 automotive applications. With compact SMT package style and high ripple current of 110mA, it's ideal for surface mount PCB designs in harsh environments.
EEHZA1V470P
Panasonic EEHZA1V470P is a 47uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 60mohm, tan delta of 0.12, and ripple current of 195mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and solid polymer dielectric material.
EEHZA1E331P
Panasonic EEHZA1E331P is a 330uF aluminum electrolytic capacitor with 25V rated DC voltage. It features a low tan delta of 0.14 and high ripple current of 375mA, suitable for automotive applications meeting AEC-Q200 standard.
EEHZC1E101XP
Panasonic EEHZC1E101XP is a 100uF aluminum electrolytic capacitor with 25V rated DC voltage. It features tan delta of 0.14, leakage current of 0.025mA, and ripple current of 210mA. Ideal for automotive applications due to AEC-Q200 reference standard compliance and solid polymer dielectric material ensuring reliability in harsh environments.
EEHZA1V680XP
Panasonic EEHZA1V680XP is a 68uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 35mohm and tan delta of 0.12, suitable for automotive applications meeting AEC-Q200 standard. Its compact SMT package makes it ideal for surface mount installations in various electronic devices.
EEHZA1E101XP
The Panasonic EEHZA1E101XP is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 25V. It has a low tan delta of 0.14 and leakage current of 0.025mA, making it suitable for applications requiring high reliability and low power loss. Its compact cylindrical package shape and surface mounting feature make it easy to integrate into various electronic devices.
EEHZA1H680P
Panasonic EEHZA1H680P is a 68uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 30mohm, tan delta of 0.1, and ripple current of 270mA. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 105 °C operating temperature range.
EEHZA1E560P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 56 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZA1H100R
Panasonic EEHZA1H100R is a 10uF aluminum electrolytic capacitor with 50V URdc. It features 0.1 Tan Delta, 75mA ripple current, and -55 to 105°C operating temperature range. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and low ESR of 120mohm.
EEHZC1H101P
The Panasonic EEHZC1H101P is a fixed aluminum electrolytic capacitor with 100uF capacitance, 50V rated DC voltage, and 240mA ripple current. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and -55 to 125°C operating temperature range.
EEHZA1V271P
Panasonic EEHZA1V271P is a 270uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 20mohm, tan delta of 0.12, and ripple current of 375mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
EEHZA1V151P
Panasonic EEHZA1V151P is a 150uF, 35V aluminum electrolytic capacitor with solid polymer dielectric. It features low ESR of 27mohm and high ripple current of 345mA, suitable for surface mount applications in automotive electronics due to AEC-Q200 compliance.
EEHZS1J151P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZS1J151V
EEHZA1E221P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZA1H330XP
The Panasonic EEHZA1H330XP is a fixed capacitor with a capacitance of 33uF and a rated DC voltage of 50V. It has a compact size of 6.6mm x 7.7mm x 6.3mm, making it suitable for surface mount applications in various electronic devices. With its low tan delta and leakage current, it ensures efficient performance and reliability.
EEHZA1V220R
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZA1J560P
Panasonic EEHZA1J560P is a 56uF aluminum electrolytic capacitor with 63V rated DC voltage. It has low ESR of 30mohm and operates b/w -55 to 105 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
EEHZC1J220XV
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved