Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic EEHZA1H220P is a 22uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 80mohm, suitable for AEC-Q200 automotive applications. With compact SMT package style and high ripple current of 110mA, it's ideal for surface mount PCB designs in harsh environments.
Median Price
$0.758
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Farnell
1+ parts
$0.696
100+ parts
$0.381
1k+ parts
$0.296
10k+ parts
-
Chip1Stop
$1.490
$0.618
Newark
$1.500
$0.776
Mouser Electronics
$1.530
$0.713
$0.552
$0.493
DigiKey
$1.700
$0.777
$0.641
TTI
Future Electronics
$0.530
Verical
$0.467
$0.412
Master Electronics
$0.534
$0.475
Arrow
$0.473
$0.417
Distrelec
Element14
$0.922
$0.886
Bürklin Elektronik
$0.820
$0.620
$0.580
Nova Conductors
$0.740
TME
$1.140
$0.525
$0.366
$0.286
Bristol Electronics
$0.555
$0.420
IBS Electronics
$0.568
$0.554
Schukat
$0.469
$0.407
NAC Semi
$0.516
$0.477
Electro Sonic
$0.559
$0.490
ComSIT Distribution GmbH
ComSIT USA
Component Sense
Aztec Data Supply Inc.
$0.240
Ampacity Inc.
$0.342
Semicontronic
$0.333
$0.332
Corohmni
$0.501
Advanced Electronics
$0.577
$0.548
Argo Parts USA
$0.579
$0.562
Modulus Dynamics
$0.723
$0.716
$0.694
Netroflash
$0.725
Abacus Technologies
Eastek
Robosynatics
Lucentia Tech
$0.114
$0.111
Continental Prestige Electronics
$0.415
$0.372
Solid polymer aluminum dielectric material provides higher reliability and longer lifespan compared to traditional electrolytic capacitors.
Low tan delta indicates low dielectric losses, leading to better overall performance and efficiency.
Low leakage current ensures minimal power loss and improved stability in the circuit.
Cylindrical package shape offers easy installation and compact design, suitable for various electronic applications.
High ripple current handling capability allows for steady and reliable operation in demanding environments.
Embossed packing method in a 15-inch reel provides convenience for automated assembly processes.
Having 2 terminals simplifies the connection process and ensures proper polarity in the circuit.
Surface mount technology (SMT) package style enables easy and reliable mounting on PCBs.
Flat terminal shape facilitates secure soldering and connection in the circuit.
Having a negative tolerance of 20% ensures that the actual capacitance value will not be lower than the specified value.
High maximum operating temperature allows for reliable performance in elevated temperature conditions.
Being an aluminum electrolytic capacitor, this product offers high capacitance values and is suitable for filtering and energy storage applications.
Low minimum operating temperature rating ensures reliable operation even in cold environments.
Polarized design ensures correct orientation during installation and prevents reverse connection, enhancing circuit safety.
Low ESR value indicates lower power dissipation and better efficiency in high-frequency applications.
Surface mounting feature simplifies installation on PCBs and saves space in the circuit design.
With a capacitance of 22uF, this capacitor is suitable for filtering applications and energy storage in electronic circuits.
Compliance with AEC-Q200 automotive standard ensures high quality and reliability for use in automotive electronics.
Rated for 50V DC voltage, making it suitable for various voltage applications in electronic circuits.
Fixed Capacitors EEHZA1H220P attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Additional Features:
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Shape:
Width:
EEHZA1H220P Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Lite-on Semiconductor
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39006/22-0565
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C104K5RAC7411
KEMET Corporation
KEMET C0603C104K5RAC7411 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its small size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
BFC237036472
Vishay Intertechnology
Vishay Intertechnology's BFC237036472 is a rectangular package film capacitor with a capacitance of 0.0047 uF. It has a rated AC voltage of 160 V and a rated DC voltage of 250 V. This capacitor is commonly used in applications requiring fixed capacitors, such as automotive electronics or industrial equipment.
GRM1885C1H100JA01D
Murata Manufacturing
Murata Manufacturing's GRM1885C1H100JA01D is a 0603 SMT ceramic capacitor with capacitance of 0.00001 uF, rated for 50V. With C0G temperature characteristics and 30ppm/°C temp coef, it operates b/w -55 to 125 °C. Ideal for applications requiring compact size and high reliability in electronic circuits.
CL10A106MQ8NNNC
Samsung Electro-mechanics
CL10A106MQ8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. With a temperature coefficient of 15% and X5R characteristics, it is ideal for applications requiring stable performance in temperatures ranging from -55 to 85°C. This SMT package features wraparound terminals and matte tin finish, making it suitable for compact surface mount designs.
C0603C220J5GACTU
KEMET Corporation's C0603C220J5GACTU is a ceramic capacitor with 0.000022 uF capacitance and 50V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C with ±5% tolerance. Ideal for surface mount applications requiring compact size and high reliability in various electronic circuits.
M39006/25-0236
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
C1210C107M8PACTU
KEMET C1210C107M8PACTU is a ceramic capacitor with 100uF capacitance, 10V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 85°C. Features rectangular package shape, multi-layer design, and matte tin over nickel terminal finish.
C2012X7R1V475K125AC
TDK
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LMK105BJ105KV-F
Taiyo Yuden
LMK105BJ105KV-F by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact, high-performance capacitors with a negative tolerance of 10%.
M39006/22-0377
Vishay Intertechnology's M39006/22-0377 is a TANTALUM CAPACITOR with 68uF capacitance, 60V URdc, and 0.13 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (368.55mA) and low leakage current (0.002mA).
293D106X9010A2TE3
Vishay Intertechnology's 293D106X9010A2TE3 is a TANTALUM CAPACITOR with 10uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
CL31B105KBHNNNE
Samsung Electro-mechanics CL31B105KBHNNNE is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0402C105K8PACTU
KEMET C0402C105K8PACTU is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and high reliability in various electronic circuits.
C0402C106M9PACTU
The KEMET Corporation C0402C106M9PACTU is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55 to 85°C, making it suitable for various SMT applications requiring stable capacitance in compact designs. With a rectangular package shape and matte tin over nickel terminal finish, this multi-layer capacitor is ideal for space-constrained electronic devices.
C0402S221K5RACTU
KEMET C0402S221K5RACTU is a ceramic capacitor with 0.00022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm and wraparound terminals for easy mounting in various electronic devices.
C1812C681JFGACTU
C1812C681JFGACTU by KEMET Corp is a ceramic capacitor with 0.00068uF capacitance, 1500V URdc, C0G temp code. Ideal for SMT applications with 5% tolerance, -55 to 125 °C operating range. Rectangular package, multi-layer design suitable for various electronic circuits.
BFC236845104
Vishay Intertechnology BFC236845104 is a film capacitor with 0.1uF capacitance and 250V rated DC voltage. It has a polyester dielectric material, 160V rated AC voltage, and operates b/w -55°C to 105°C. Ideal for applications requiring reliable fixed capacitors in bulk packaging with radial package style for through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EEHZA1H101P
Panasonic EEHZA1H101P is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 28mohm, -55 to 105 °C operating temp range, and AEC-Q200 standard compliance. Ideal for SMT applications requiring high ripple current handling up to 300mA.
EEHZA1V470P
Panasonic EEHZA1V470P is a 47uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 60mohm, tan delta of 0.12, and ripple current of 195mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and solid polymer dielectric material.
EEHZC1J220XP
Panasonic EEHZC1J220XP is a 22uF aluminum electrolytic capacitor with 63V URdc. It features 0.08 Tan Delta, 90mA Ripple Current, and -55 to 125°C operating temperature range. Ideal for automotive applications meeting AEC-Q200 standard.
EEHZA1E331P
Panasonic EEHZA1E331P is a 330uF aluminum electrolytic capacitor with 25V rated DC voltage. It features a low tan delta of 0.14 and high ripple current of 375mA, suitable for automotive applications meeting AEC-Q200 standard.
EEHZC1E101XP
Panasonic EEHZC1E101XP is a 100uF aluminum electrolytic capacitor with 25V rated DC voltage. It features tan delta of 0.14, leakage current of 0.025mA, and ripple current of 210mA. Ideal for automotive applications due to AEC-Q200 reference standard compliance and solid polymer dielectric material ensuring reliability in harsh environments.
EEHZA1V680XP
Panasonic EEHZA1V680XP is a 68uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 35mohm and tan delta of 0.12, suitable for automotive applications meeting AEC-Q200 standard. Its compact SMT package makes it ideal for surface mount installations in various electronic devices.
EEHZA1E101XP
The Panasonic EEHZA1E101XP is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 25V. It has a low tan delta of 0.14 and leakage current of 0.025mA, making it suitable for applications requiring high reliability and low power loss. Its compact cylindrical package shape and surface mounting feature make it easy to integrate into various electronic devices.
EEHZA1H680P
Panasonic EEHZA1H680P is a 68uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 30mohm, tan delta of 0.1, and ripple current of 270mA. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 105 °C operating temperature range.
EEHZA1E560P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 56 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZA1H100R
Panasonic EEHZA1H100R is a 10uF aluminum electrolytic capacitor with 50V URdc. It features 0.1 Tan Delta, 75mA ripple current, and -55 to 105°C operating temperature range. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and low ESR of 120mohm.
EEHZC1H101P
The Panasonic EEHZC1H101P is a fixed aluminum electrolytic capacitor with 100uF capacitance, 50V rated DC voltage, and 240mA ripple current. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and -55 to 125°C operating temperature range.
EEHZA1V271P
Panasonic EEHZA1V271P is a 270uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 20mohm, tan delta of 0.12, and ripple current of 375mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
EEHZA1V151P
Panasonic EEHZA1V151P is a 150uF, 35V aluminum electrolytic capacitor with solid polymer dielectric. It features low ESR of 27mohm and high ripple current of 345mA, suitable for surface mount applications in automotive electronics due to AEC-Q200 compliance.
EEHZS1J151P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZS1J151V
EEHZA1E221P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZA1H330XP
The Panasonic EEHZA1H330XP is a fixed capacitor with a capacitance of 33uF and a rated DC voltage of 50V. It has a compact size of 6.6mm x 7.7mm x 6.3mm, making it suitable for surface mount applications in various electronic devices. With its low tan delta and leakage current, it ensures efficient performance and reliability.
EEHZA1V220R
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
EEHZA1J560P
Panasonic EEHZA1J560P is a 56uF aluminum electrolytic capacitor with 63V rated DC voltage. It has low ESR of 30mohm and operates b/w -55 to 105 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
EEHZA1H220V
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved