Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic EEEHD1E220AP is a 22uF aluminum electrolytic capacitor with 25V URdc. It has tan delta of 0.16, leakage current of 0.0055mA, and ripple current of 55mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
Median Price
$0.399
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.352
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.198
$0.142
Mouser Electronics
$0.510
$0.229
$0.160
$0.126
DigiKey
$0.560
$0.228
$0.179
Verical
$0.163
$0.145
Distrelec
Arrow
Nova Conductors
$0.182
Electro Sonic
$0.141
$0.122
Vyrian
Martec Srl
Semicontronic
$0.088
$0.086
$0.085
Ampacity Inc.
Corohmni
$0.171
Continental Prestige Electronics
$0.168
Argo Parts USA
$0.166
Advanced Electronics
$0.176
$0.167
Netroflash
Modulus Dynamics
$0.196
$0.194
$0.188
Aztec Data Supply Inc.
$0.550
Robosynatics
Lucentia Tech
$0.164
Aluminum electrolytic capacitors are known for their high capacitance values and high tolerance for ripple current, making them suitable for applications requiring high capacitance levels.
Low tan delta indicates low dissipation factor, ensuring minimal energy loss and high efficiency in the circuit.
Low leakage current ensures the capacitor maintains its charge for longer durations, contributing to overall stability of the circuit.
Cylindrical packages are compact and easily mountable, making them suitable for space-constrained applications.
High ripple current rating allows the capacitor to handle fluctuations in current smoothly, ensuring reliable performance in dynamic circuits.
Embossed packaging with TR (tape and reel) packaging method ensures easy handling, storage, and automatic pick-and-place during assembly.
Having 2 terminals simplifies the connection process and makes it easier to integrate into circuits.
Surface Mount Technology (SMT) package style enables easy and secure mounting on PCBs, reducing assembly time and ensuring mechanical stability.
With a negative tolerance of 20%, the capacitor is guaranteed to have a capacitance value within 20% below the specified value, ensuring consistency in performance.
High maximum operating temperature tolerance makes the capacitor suitable for applications where temperature fluctuations are common, ensuring long-term reliability.
Wide operating temperature range allows the capacitor to function effectively in extreme temperature conditions, increasing its versatility in various applications.
Polarized design ensures proper orientation during installation, preventing potential damage or circuit malfunction.
High capacitance value of 22uF provides ample storage capacity for charge, suitable for applications requiring stable electrical energy storage.
Compliance with AEC-Q200 standards ensures the capacitor meets automotive-grade quality and reliability requirements, making it ideal for automotive applications.
High rated DC voltage allows the capacitor to withstand higher voltage levels, making it suitable for power supply circuits and other high-voltage applications.
Fixed Capacitors EEEHD1E220AP attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Height:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Shape:
Width:
EEEHD1E220AP Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
PCN Packaging - Multiple SMD Lytic Series 05/Jul/2017
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
UCL1V101MCL6GS
Nichicon
Nichicon UCL1V101MCL6GS is a 100uF, 35V aluminum electrolytic capacitor with 0.12 Tan Delta and 0.035mA Leakage Current. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105°C operating temperature range.
04023C103KAT2A
KYOCERA AVX
04023C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, rated at 25V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for compact electronic devices requiring stable performance in harsh environments. Its multi-layer design and wraparound terminals ensure reliable connectivity and space-saving installation.
M39006/22-0345
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
04026D105KAT2A
04026D105KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 6.3V URdc, X5R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and temperature stability up to 85°C.
GCM1555C1H101JA16D
Murata Manufacturing's GCM1555C1H101JA16D is a ceramic capacitor with capacitance of 0.0001uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
GCM21BR71E225KA73L
Murata Manufacturing's GCM21BR71E225KA73L is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CL10A475KP8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL10A475KP8NNNC is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for SMT applications requiring compact size and high reliability. The capacitor's tan delta of 0.1 ensures low dissipation factor for efficient performance in various electronic devices.
ECA1HM100
Panasonic
ECA1HM100 by Panasonic is a 10uF, 50V aluminum electrolytic capacitor with tan delta of 0.12 and leakage current of 0.005mA. Ideal for applications requiring high ripple current handling up to 65mA, such as power supplies and audio equipment due to its cylindrical package shape and through hole mounting feature.
1210B475K500CT
Walsin Technology
1210B475K500CT by Walsin Technology is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
BFC238320474
Vishay Intertechnology
Vishay Intertechnology BFC238320474 is a 0.47uF film capacitor with 630V DC and 220V AC ratings. Featuring polypropylene dielectric, it has a rectangular package shape for through-hole mounting applications. With a temperature range of -55 to 105 °C, it is ideal for various electronic circuits requiring high capacitance and voltage tolerance.
CL05C101JB5NNNC
Samsung Electro-mechanics' CL05C101JB5NNNC is a ceramic capacitor with 0.0001uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring high precision and stability in electronic circuits.
ESH475M050AC3AA
KEMET Corporation
ESH475M050AC3AA by KEMET is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for applications requiring a max operating temperature of 105°C. It features a low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for use in circuits with ripple currents up to 30mA.
C0805C103K5RACTU
KEMET C0805C103K5RACTU is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM155R71C224KA12D
The Murata Manufacturing GRM155R71C224KA12D is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
CL05A106MQ5NUNC
Samsung Electro-mechanics' CL05A106MQ5NUNC is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Its X5R temperature characteristics make it suitable for applications requiring -55 to 85 °C operating temperatures. With a compact SMT package style, it's ideal for space-constrained designs in various electronic devices.
12105C475K4T2A
12105C475K4T2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
0603B103K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRM32ER72A225KA35L
Murata Manufacturing's GRM32ER72A225KA35L is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
T491B476K010AT
KEMET Corporation's T491B476K010AT is a 47uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0047mA, and Ripple Current of 117mA. Ideal for applications requiring compact SMT capacitors with high capacitance and low ESR like power supplies and consumer electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EEEHD1V4R7AR
Panasonic EEEHD1V4R7AR is a 4.7uF aluminum electrolytic capacitor with 35V URdc. It features tan delta of 0.13, leakage current of 0.003mA, and ripple current of 17mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
EEEHD1E4R7AR
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHB1H4R7R
Panasonic EEEHB1H4R7R is a 4.7uF aluminum electrolytic capacitor with 50V URdc, suitable for surface mount applications. It offers low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for high ripple current (23mA) environments in automotive electronics adhering to AEC-Q200 standards.
EEEHD1V221AP
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHB1V100R
Panasonic EEEHB1V100R is a 10uF aluminum electrolytic capacitor with 35V rated DC voltage. It has low tan delta of 0.12 and leakage current of 0.0035mA, suitable for automotive applications meeting AEC-Q200 standard.
EEEHAV101XAP
EEEHAV101XAP by Panasonic is a 100uF ALUMINUM ELECTROLYTIC CAPACITOR with 35V URdc. It features a Tan Delta of 0.14 and Leakage Current of 0.035mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
EEEHA0J101WR
Panasonic EEEHA0J101WR is a 100uF aluminum electrolytic capacitor with 6.3V rated DC voltage, suitable for surface mount applications. Featuring tan delta of 0.35 and leakage current of 0.0063mA, it operates b/w -40 to 105°C, making it ideal for automotive electronics due to AEC-Q200 compliance.
EEEHA1C100R
Panasonic EEEHA1C100R is a 10uF aluminum electrolytic capacitor with 16V URdc. It features tan delta of 0.16, leakage current of 0.003mA, and ripple current of 28mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
EEEHD1C100AR
Panasonic EEEHD1C100AR is a 10uF aluminum electrolytic capacitor with 16V rated DC voltage. It features tan delta of 0.20, leakage current of 0.003mA, and ripple current of 28mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
EEEHB1H100P
Panasonic EEEHB1H100P is a 10uF aluminum electrolytic capacitor with 50V URdc. It has low tan delta of 0.12 and leakage current of 0.005mA, suitable for automotive applications meeting AEC-Q200 standard.
EEEHA1E331UP
Panasonic's EEEHA1E331UP is a 330uF aluminum electrolytic capacitor with a rated DC voltage of 25V. It has a max operating temperature of 105°C and a min operating temperature of -40°C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard and surface mounting feature.
EEEHA1V220WR
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHA2A470UP
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHB0J470R
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHA1H4R7R
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHD1C470AP
Panasonic EEEHD1C470AP is a 47uF aluminum electrolytic capacitor with 16V rated DC voltage. It has tan delta of 0.20 and leakage current of 0.00752mA, suitable for automotive applications meeting AEC-Q200 standard. With compact SMT package style, it operates b/w -40 to 105 °C, ideal for surface mounting in various electronic devices.
EEEHA1H100P
Panasonic's EEEHA1H100P is a 10uF aluminum electrolytic capacitor with a rated DC voltage of 50V. It has a low tan delta of 0.12 and leakage current of 0.005mA, making it suitable for applications requiring high reliability and stability in temperature ranges from -40°C to 105°C.
EEEHC1V220P
EEEHD2A100P
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEEHD1E220AV
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved