Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Panasonic AXK724147G is a 24-contact board stacking connector with a mating contact pitch of 0.016", suitable for PCB applications. Featuring nickel/gold termination, it offers high insulation resistance of 1 Gohm and can handle up to 5A signal current, making it reliable for commercial use at temperatures ranging from -55°C to 85°C.
Median Price
$1.013
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.400
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.500
$1.100
Mouser Electronics
$1.660
$1.120
$0.966
$0.905
Element14
$2.540
$1.990
$1.420
TTI Europe
$0.868
Arrow
$0.883
Verical
$0.884
Avnet
$0.771
Master Electronics
$0.867
$0.833
Nova Conductors
$0.960
Speed Components Ltd
IBS Electronics
$1.421
$1.216
$1.168
EZ Electronic Parts
Inventory MP
Bristol Electronics
Vyrian
Electro Sonic
$1.070
$0.976
NexGen Digital
VNN
Ampacity Inc.
$0.800
Argo Parts USA
Netroflash
Continental Prestige Electronics
$2.310
$1.240
Kepictronics
GreenTree Electronics
Perfect Parts
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$5.083
$4.707
Assy Fe
The small contact pitch allows for high density connections, making this product suitable for applications where space is limited.
High insulation resistance ensures reliable and stable electrical connections, reducing the risk of signal interference or leakage.
The high dielectric voltage withstand capability ensures safe operation in applications with varying voltage levels.
With a high signal current rating, this connector can handle demanding applications without risk of overheating or signal degradation.
The connector is designed for repeated use, ensuring reliability and longevity in applications that require frequent connections and disconnections.
Surface mount termination offers easy and efficient installation on PCBs, saving time and effort in the assembly process.
Headers & Edge Type Connectors AXK724147G attributes and parameters. Explore more Headers & Edge Type Connectors devices from Panasonic
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
AXK724147G Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - P5KF, F4S, P4S, A4F & P4 Partial Series 04/Feb/2016
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
22-14-2104
Molex
The Molex 22-14-2104 is a board connector with 10 contacts, rated at 2.5A signal current and featuring a mating contact pitch of 0.1". With a body length of 0.996", it is designed for PCB edge locking hook mounting applications, offering durability of 25 cycles and insulation resistance of 500000000000 ohm.
7-215079-8
TE Connectivity
TE Connectivity 7-215079-8 is a board connector with 0.05" pitch, suitable for headers & edge type connectors. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, it has 100 V rated voltage and -40 to 105 °C operating temperature range. Ideal for commercial applications requiring a durable, polarized housing design with solder termination.
640456-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: NO;
66506-353LF
Amphenol Communications Solutions
Amphenol's 66506-353LF is a 2-row, 34-contact board connector with UL94V-0 flammability rating. Featuring 2.54mm terminal pitch and solder termination, it is ideal for straight mounting applications in headers & edge type connectors.
52207-1160
The Molex 52207-1160 is a FFC/FPC connector with 11 contacts, mating pitch of 0.039", and tin termination finish. It operates b/w -30 to 85°C, suitable for board mounting in applications requiring a right angle receptacle design.
78723-1001
Molex 78723-1001 is a PCB connector with 0.1" pitch, suitable for applications requiring a rated current of 0.5A. Featuring matte tin finish and glass-filled liquid crystal polymer insulator, it offers high insulation resistance of 1Gohm. With right-angle mounting style and black insulator color, it has 6 contacts in a rectangular pattern for surface mount termination.
22-01-2047
The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
PAP-05V-S
J S T Mfg
PAP-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.079" pitch, 3A signal current rating, and 800VAC dielectric voltage. Ideal for cable mounting applications, it features POLYAMIDE66 insulation material and operates b/w -25 to 85°C.
DM3AT-SF-PEJM5(26)
Hirose Electric
DM3AT-SF-PEJM5(26) by Hirose Electric is a PCB connector with 0.043" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a male contact finish of AU, operates b/w -25 to 85 °C, and has a durability of 10000 cycles.
02021602201
Harting Electronics & Kg
02021602201 by Harting Electronics & Kg is a 5-row, 160-contact board Euro connector with gold over nickel termination. It features a mating contact pitch of 0.1", insulation resistance of 1TΩ, and withstands up to 1000VAC. Ideal for commercial applications requiring durable connectors with high reliability in temperatures ranging from -65°C to 125°C.
53047-0310
Molex 53047-0310 is a board connector with 3 contacts, 1.25mm terminal pitch, and 0.049" mating contact pitch. It features tin termination finish, white polyamide insulator, and UL94V-0 flammability rating. Ideal for commercial applications requiring a polarized housing with rectangular PCB contact pattern.
S3B-XH-A(LF)(SN)
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
SHR-08V-S-B
SHR-08V-S-B by J S T Mfg is a BOARD CONNECTOR with 8 contacts, POLARIZED HOUSING, and 1A signal rating. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a reliable FEMALE connector with CRIMP termination.
71918-140LF
The Amphenol Communications Solutions 71918-140LF is a 40-contact board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a 707VAC dielectric voltage rating and operates b/w -65°C to 125°C temperature range. With matte tin over nickel finish, it offers reliable signal current of up to 3A.
2-640456-3
TE Connectivity 2-640456-3 is a 23-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a rectangular contact pattern and solder termination.
MEM2075-00-140-01-A
Global Connector Technology
MEM2075-00-140-01-A by Global Connector Technology is a PCB connector with 8 contacts, 0.043" pitch, and 1u plating thickness. It has a temperature range of -25 to 85°C and insulation resistance of 1Gohm. Ideal for applications requiring durable connectors with high mating cycles in electronics manufacturing.
51021-0200
The Molex 51021-0200 is a board connector with 0.049" pitch, 0.167" body length, and POLYBUTYLENE insulation material. It has 2 contacts, operates b/w -40 to 85°C, and features a female crimp termination for cable mounting. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability rating.
5103308-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; Mating Contact Finish: GOLD FLASH OVER PALLADIUM NICKEL (15)/GOLD (15) OVER NICKEL (50);
14-45-0222
Molex 14-45-0222 is a 22-contact board connector with 0.1" pitch, TIN over nickel finish, and glass-filled polyester insulator. It operates b/w -40 to 105°C, rated for 3A signal current, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable male connectors with IDC termination in black color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AXK720247G
Panasonic
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; JESD-609 Code: e4; Filter Feature: NO;
AXK724247G
AXK724247G by Panasonic is a 2-row board stacking connector with 24 contacts. It features gold over nickel termination contact finish and copper alloy contact material. This socket-style connector is suitable for surface mount applications.
AXK720147G
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; DIN Conformance: NO; UL Flammability Code: 94V-0;
AXK720347G
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Contact Material: COPPER ALLOY; DIN Conformance: NO;
AXK740247G
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: COPPER ALLOY; Mixed Contacts: NO; Mounting Style: STRAIGHT;
AXK740147G
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VDC; No. of Connectors: ONE;
AXK770147G
The Panasonic AXK770147G is a 70-contact board stacking connector with gold over nickel finish. Featuring 2 rows, 0.4mm terminal pitch, and UL 94V-0 flammability rating, it's ideal for surface mount applications in headers & edge type connectors. The female contact material is copper alloy for reliable performance.
AXK700147G
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Mounting Type: BOARD; Mounting Style: STRAIGHT;
AXK730447G
AXK730447G by Panasonic is a 2-row board stacking connector with a total of 30 contacts. It features a terminal pitch of 0.4mm and surface mount termination, making it suitable for various applications in electronics manufacturing.
AXK760147G
AXK760147G by Panasonic is a board stacking connector with 2 rows and a total of 60 contacts. It has a terminal pitch of 0.4mm and features gold over nickel termination contact finish. This connector is suitable for surface mount applications and offers multiple mating parts.
AXK770347G
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: AXK7; MIL Conformity: NO; Additional Features: LOW PROFILE;
AXK780147G
The Panasonic AXK780147G is a 80-contact, 2-row board stacking connector with gold (Au) termination finish. Featuring liquid crystal polymer insulation and copper alloy contacts, it offers high durability with 3000 cycles. Ideal for commercial applications requiring a mating contact pitch of 0.016", this female socket connector has a rated signal current of 0.3A.
AXK750145J
AXK7L40227
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .173 inch;
AXK730145G
AXK734145G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved