Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TM150XG-26L10A by Onsemi features 1024x768 resolution, 12.5mm depth, and operates b/w 0-50 °C. Ideal for displays & monitors in various applications due to its 3.3V supply voltage and dimensions of 331.6x254.8x12.5 mm.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Problanco Electronics
SupplyDigital Components
Corphita
Kulean Microsystems
UHIMA Technologies
Corohmni
High resolution display providing sharp and clear images and text.
Slim design making it suitable for compact spaces or for a sleek look.
Can operate efficiently even in relatively high temperature environments.
Optimal height for comfortable viewing and usability.
Can function in cold environments without any issues.
Spacious viewing area to accommodate multiple windows or applications simultaneously.
Energy-efficient operation with low power consumption.
Compact size for easy placement on a desk or mounting on a wall.
Provides sufficient vertical space for viewing content without scrolling frequently.
Combined with horizontal pixel count, offers a high-resolution display for detailed visual content.
Displays & Monitors TM150XG-26L10A attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Horizontal Pixel Count:
Maximum Operating Temperature:
Minimum Operating Temperature:
Depth:
Height:
Length:
Sub-Category:
Nominal Supply Voltage:
Pixel Count (Vertical):
Viewing Area Height:
Viewing Area Length:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LTA057A340F
Toshiba
Displays; Viewing Area Height: 86 mm; Height: 104.6 mm; Maximum Operating Temperature: 70 Cel; Depth: 7.8 mm; Viewing Area Length: 115 mm;
202AFCBC3LP
Displaytech
Displays;
LT104AD18800
Displays; Nominal Supply Voltage: 3.3 V; Viewing Area Length: 211 mm; Depth: 5.7 mm; Minimum Operating Temperature: -20 Cel; Pixel Count (Vertical): 600 Pixel;
NL6448AC32-01
Renesas Electronics
Displays; Pixel Count (Vertical): 480 Pixel; Height: 180 mm; Nominal Supply Voltage: 3.3 V; Viewing Area Length: 205 mm; Maximum Operating Temperature: 50 Cel;
NL128102AC28-01F
Displays; Depth: 41 mm; Horizontal Pixel Count: 1280 Pixel; Maximum Operating Temperature: 55 Cel; Nominal Supply Voltage: 12 V; Length: 420 mm;
LCM5541-32NTK
LCM5541-32NTK by Onsemi is a 640x480 pixel display with blue color at 5V supply voltage. With dimensions of 186x121x6 mm, it operates b/w 5-40 °C. Ideal for applications requiring high-resolution displays in compact spaces.
LCM5101
LCM5101 by Onsemi is a 5V display with 8 characters per row, featuring a 5x7 + CSR font type. With dimensions of 58mm x 32mm x 12mm, it has a viewing area height of 15mm and is ideal for applications requiring compact displays in the temperature range of 0-40 °C.
LCM5415-02A
LCM5415-02A by Onsemi is a 640x64 pixel display with dimensions of 300x53x10 mm. It operates b/w 0-40 °C, powered by a 5V supply. Ideal for applications requiring compact, high-resolution displays in various electronic devices.
DM2023-7GL7
The Onsemi DM2023-7GL7 display has 2 rows with 20 characters each in a 5x8 Dot font type. With a height of 4.85mm and viewing area of 16mm, it operates b/w 0-50 °C. Ideal for applications requiring compact displays with clear visibility and low power consumption at a nominal voltage of 5V.
NL128102AC31-01E
Displays; Horizontal Pixel Count: 1280 Pixel; Maximum Operating Temperature: 55 Cel; Pixel Count (Vertical): 1024 Pixel; Height: 382 mm; Depth: 40 mm;
NL10276AC30-03L
Displays; Length: 350 mm; Minimum Operating Temperature: 0 Cel; Nominal Supply Voltage: 12 V; Height: 265 mm; Viewing Area Length: 304 mm;
DM1620-0JL7
The Onsemi DM1620-0JL7 display has 2 rows with 16 characters each in a 5x8 Dot font type. With a height of 33mm and depth of 13mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility like industrial control panels.
LTA057A344F
Displays; Depth: 9.5 mm; Viewing Area Length: 115 mm; Minimum Operating Temperature: -20 Cel; Viewing Area Height: 86 mm; Nominal Supply Voltage: 3.3 V;
ALP026AXX
ALP026AXX by Onsemi is a 521x218 pixel display with 7x5 mm viewing area. Operating b/w -10 °C to 60°C, it has a depth of 2mm and requires 8.5V supply voltage. Ideal for applications requiring compact displays with high resolution in limited space.
ALP239CXX
ALP239CXX by Onsemi is a 557x234 pixel display with dimensions of 48x40x2 mm. It operates b/w -10 °C to 60°C, powered by a 12V supply. Ideal for applications requiring compact high-resolution displays in limited space environments.
LTA400W1-L01
Samsung
Displays; Nominal Supply Voltage: 5 V; Length: 933 mm; Viewing Area Length: 872 mm; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;
LTM170EU-A01
Displays; Horizontal Pixel Count: 1280 Pixel; Height: 297 mm; Pixel Count (Vertical): 1024 Pixel; Viewing Area Height: 270 mm; Depth: 22 mm;
NL10276AC28-01E
Displays; Pixel Count (Vertical): 768 Pixel; Horizontal Pixel Count: 1024 Pixel; Height: 255 mm; Depth: 19 mm; Viewing Area Height: 214 mm;
DM2023-0HL3
DM2023-0HL3 by Onsemi is a 2-row display with 20 characters per row, featuring a 5x8 Dot character font type. With a height of 32mm and depth of 13mm, it operates b/w temperatures of 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility at nominal voltage of 5V.
LCM595-32A
The Onsemi LCM595-32A is a 480x64 pixel display with dimensions of 290x73x12 mm. It operates at temperatures from 0 to 40 °C, powered by a nominal 5V supply. Ideal for applications requiring a compact and high-resolution display such as portable electronic devices or industrial control panels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TM150XG-02L11
Displays; Viewing Area Length: 304 mm; Nominal Supply Voltage: 3.3 V; Pixel Count (Vertical): 768 Pixel; Height: 242 mm; Minimum Operating Temperature: 0 Cel;
TM150XG-26L06
Displays; Length: 332 mm; Pixel Count (Vertical): 768 Pixel; Horizontal Pixel Count: 1024 Pixel; Depth: 12.5 mm; Minimum Operating Temperature: 0 Cel;
TM150XG-26L06A
Displays; Horizontal Pixel Count: 1024 Pixel; Viewing Area Length: 304 mm; Maximum Operating Temperature: 50 Cel; Length: 331.6 mm; Nominal Supply Voltage: 3.3 V;
TM150XG-26L09A
Displays; Viewing Area Length: 304 mm; Length: 331.6 mm; Viewing Area Height: 228 mm; Nominal Supply Voltage: 3.3 V; Pixel Count (Vertical): 768 Pixel;
Sanyo Electric
Displays; Viewing Area Length: 304 mm; Pixel Count (Vertical): 768 Pixel; Maximum Operating Temperature: 50 Cel; Horizontal Pixel Count: 1024 Pixel; Minimum Operating Temperature: 0 Cel;
Displays; Maximum Operating Temperature: 50 Cel; Viewing Area Length: 304 mm; Depth: 12.5 mm; Minimum Operating Temperature: 0 Cel; Pixel Count (Vertical): 768 Pixel;
Displays; Depth: 6 mm; Viewing Area Length: 304 mm; Maximum Operating Temperature: 50 Cel; Nominal Supply Voltage: 3.3 V; Length: 317.3 mm;
Displays; Horizontal Pixel Count: 1024 Pixel; Pixel Count (Vertical): 768 Pixel; Viewing Area Height: 228 mm; Depth: 12.5 mm; Viewing Area Length: 304 mm;
TM150XG-26L10A
Displays; Depth: 12.5 mm; Viewing Area Height: 228 mm; Viewing Area Length: 304 mm; Pixel Count (Vertical): 768 Pixel; Horizontal Pixel Count: 1024 Pixel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved