Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.989
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$0.934
100+ parts
$0.718
1k+ parts
$0.378
10k+ parts
-
Chip1Stop
$1.060
Mouser Electronics
$1.260
$0.534
$0.511
Element14
$3.140
$2.040
$1.670
$1.600
Rochester
$0.806
$0.669
$0.597
DigiKey
$1.010
Arrow
$0.571
$0.474
$0.454
Verical
$0.837
$0.746
RS (Exports)
$0.845
Digiode
$0.132
Nova Conductors
$0.494
Greenchips
$0.506
$0.482
$0.459
$0.414
Ozdisan Elektronik
$0.521
TME
$1.160
$0.717
$0.612
Component Electronics Inc.
$1.540
$1.150
$1.000
Bristol Electronics
$1.663
$0.616
$0.466
Chip Stock
Martec Srl
Vyrian
DigiKey Marketplace
Netsource Technology, Inc.
Semi Source
Manoshevitz Elec. Sales
SIE Connect GmbH - GreenChips
NAC Semi
$1.420
Classic Components Corporation
Microfarads
Lakeland Logistics Inc
ComSIT Distribution GmbH
Sunrise Surplus Inc.
Dan-Mar Components
Inland Empire Components Inc.
Q Components
Inventory MP
PC Components Company LLC
ComSIT USA
Corel Iberica Componentes, S.L.
LWI Electronics Inc
LittleDiode
Semicontronic
$0.118
$0.115
$0.114
Corphita
$0.125
Argo Parts USA
$0.479
Continental Prestige Electronics
$0.960
$0.723
$0.693
Corohmni
$7.059
Advanced Electronics
$9.208
$8.748
Parana Technologies
$11.647
$12.041
DigiPath Technology Company
$12.824
ChromeModa Solutions
$13.086
$10.731
IDEA Electronic Components Group
$12.432
$11.777
Perfect Parts
Problanco Electronics
SupplyDigital Components
Lixinc
TANS Electronics
Infinite Electronics LLP (Excess)
Kepictronics
Microchip USA
Authorized Procurement Solutions
GreenTree Electronics
Futuretech Components
UHIMA Technologies
Kulean Microsystems
Supply Digital
Robosynatics
Lucentia Tech
Bastille Electronics
Assy Fe
Switching Regulators & Controllers TL494CD attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TL494CD Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taitron Components
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Infinex
Rfe International
SPC TECHNOLOGY/ MULTICOMP
LM46002PWP
LM46002PWP by Texas Instruments is a current-mode switching regulator with a max output voltage of 28V and max output current of 2A. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 3.5V to 60V, and has a compact small outline package style.
LT1933ES6#TRMPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC34063ACD-TR
STMicroelectronics
MC34063ACD-TR by STMicroelectronics is a voltage-mode switching regulator with 1.5A output current, operating at 100kHz frequency. It has a boost configuration and supports input voltages from 3V to 40V, making it ideal for commercial applications requiring efficient power conversion in a compact package.
LMR33630CDDAR
LMR33630CDDAR by Texas Instruments is a switching regulator with a max output current of 3A and a max output voltage of 34V. It operates in buck configuration, with a control mode of current-mode PWM. Ideal for automotive applications due to its low profile package style and wide temperature range from -40°C to 125°C.
UCC28C45DGKR
UCC28C45DGKR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this IC is ideal for compact designs requiring efficient pulse width modulation control.
L7987LTR
L7987LTR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, operating at a max frequency of 1650 kHz. With a max output current of 3.45 A and input voltage range from 4.5 V to 61 V, it is ideal for applications requiring efficient power conversion in compact spaces.
UC2825DWTRG4
UC2825DWTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring precise voltage regulation in compact designs. The IC features pulse width modulation control technique and push-pull switcher configuration, ideal for applications demanding efficient power conversion with minimal footprint.
UCC28C43DGK
UCC28C43DGK by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this IC is ideal for compact designs requiring efficient pulse width modulation control.
LM2674MX-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2675M-3.3/NOPB
LM2675M-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 1A output current and 3.3V nominal output voltage. Operating b/w -40°C to 125°C, it's ideal for automotive applications due to its buck switcher configuration and DMOS technology. With a max input voltage of 40V and compact dimensions (4.9mm x 3.9mm x 1.75mm), it offers efficient power management in small spaces.
LM25011AQ1MY/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .5 mm;
AP62200WU-7
AP62200WU-7 by Diodes Inc. is a switching regulator with 2A output current, 7V max output voltage, and 750kHz max switching frequency. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and wide input voltage range of 4.2V to 18V.
LM2596TVADJG
LM2596TVADJG by Onsemi is a 5-terminal switching regulator with max output current of 7.5A and max input voltage of 40V. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring a buck switcher config and voltage-mode control up to 180kHz frequency.
LM2671MX-5.0/NOPB
LMZ14203HTZX/NOPB
LMZ14203HTZX/NOPB by Texas Instruments is a switching regulator with 3A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range. Compact design with small outline package style makes it suitable for space-constrained environments.
LMR33630ADDA
LMR33630ADDA by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 34V max output voltage. Ideal for automotive applications, it operates b/w -40 to 125°C and supports a wide input range of 3.8-36V.
LM3478MM/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM5008AMM/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1;
TPS40170RGYR
TPS40170RGYR by Texas Instruments is a voltage-mode switching regulator with a max output current of 20A and a max output voltage of 57V. It operates in automotive-grade temperatures (-40 to 125°C) and is suitable for applications requiring high efficiency power conversion, such as automotive electronics or industrial automation systems.
TL494IN
TL494IN by Texas Instruments is a voltage-mode switching controller with a nominal output voltage of 5V. It operates at a max switching frequency of 300 kHz and has a max output current of 0.25A. Ideal for industrial applications requiring precise control and regulation in power supplies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TL494IDR
TL494IDR by Texas Instruments is a voltage-mode switching controller with 16 terminals, operating at -40 to 85°C. It features a nominal output voltage of 5V, PWM control technique, and push-pull switcher config. Ideal for industrial applications requiring precise regulation in compact designs up to 300 kHz frequency.
TL494CDR
TL494CDR by Texas Instruments is a voltage-mode switching controller with a nominal output voltage of 5V and max output current of 0.25A. It operates in push-pull configuration at a max switching frequency of 300kHz, suitable for various commercial applications requiring precise PWM control. The IC's compact small outline package makes it ideal for space-constrained designs.
TL494CDR2G
TL494CDR2G by Onsemi is a 16-terminal switching controller with a max output current of 0.5A and a control mode of voltage-mode PWM. It operates b/w temperatures of 0 to 70°C, making it suitable for various commercial applications requiring pulse width modulation control techniques at frequencies up to 200kHz.
Motorola
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Rochester Electronics
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TL494BDR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL494BDR2G by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 125 °C and supports a max output current of 0.5 A at a frequency of 200 kHz. Ideal for automotive applications due to its small outline package style and push-pull switcher configuration.
TL494CD
First Components International
Switching Regulator or Controllers; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL494CPWR
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL494ID
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL494CN
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TL494G-S16-T
Unisonic Technologies
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved