Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Nominal Supply Voltage: 5.3 V; Minimum Operating Temperature: -10 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
Corohmni
UHIMA Technologies
Kulean Microsystems
Photo IC Sensors SPS417-1 attributes and parameters. Explore more Photo IC Sensors devices from Onsemi
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sub-Category:
Nominal Supply Voltage:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Cheng-yi Electronic
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Silicon Standard
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
TSOP6238TT
Vishay Intertechnology
Vishay Intertechnology's TSOP6238TT is a 2.2mm round LOGIC OUTPUT PHOTO IC with an IR range, ideal for REMOTE CONTROL applications. It operates b/w -25 to 85 °C with a min supply voltage of 4.5 V and max on state current of 0.015 A, suitable for surface mount installation.
OPT101P-J
Texas Instruments
The Texas Instruments OPT101P-J is a 2.29mm SQUARE Photo IC Sensor with LINEAR OUTPUT. It operates at 0-70°C, requires a min voltage of 2.7V, and has NICKEL PALLADIUM GOLD terminals. Ideal for AMPLIFIER applications due to its high precision and reliability.
SPS408-1
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Nominal Supply Voltage: 5.3 V; Maximum Operating Temperature: 60 Cel;
TSL25711FN
Ams Ag
TSL25711FN by Ams Ag is a complex photo IC sensor with logic output. It operates at a min supply voltage of 2.6V and has a max operating temperature of 70°C. Ideal for applications requiring infrared sensing, it features 6 terminals and consumes up to 0.25mA at a nominal voltage of 3V.
ISL29009IROZ-T7A
Renesas Electronics
Photo ICs; Mounting Feature: SURFACE MOUNT; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Nominal Supply Voltage: 3 V; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
TSOP34840
Vishay Semiconductors
LOGIC OUTPUT PHOTO IC; Terminal Finish: TIN; Size: 5 mm; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .005 A;
TSOP75438WTT
LINEAR OUTPUT PHOTO IC; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
TSOP36438TR
VEML3235SL
LOGIC OUTPUT PHOTO IC;
TPS818
Toshiba
LINEAR OUTPUT PHOTO IC; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE; No. of Functions: 1; Maximum Operating Temperature: 85 Cel; Minimum Supply Voltage: 4.5 V;
TSL218
TSL218 by Texas Instruments is a linear output photo IC sensor with a min supply voltage of 4.5V and max operating temperature of 70°C. Its complex configuration makes it suitable for applications requiring precise light sensing in various environments, such as industrial automation and robotics.
TSOP36238TR
Vishay Intertechnology's TSOP36238TR is a linear output photo IC with a supply voltage of 3V and operating temperatures ranging from -25°C to 85°C. It has a max supply current of 1.5mA, matte tin terminal finish, and is designed for surface mount applications in optoelectronics.
TSL250R-LF
TSL250R-LF by Ams Ag is a 1.8mm LINEAR OUTPUT PHOTO IC with 2.7V min supply voltage and 70°C max operating temp. Ideal for AMPLIFIER applications, it features a 5V nominal voltage and 0.01A max on-state current, making it suitable for THROUGH HOLE MOUNT installations.
SFH5440
Osram Opto Semiconductors
LOGIC OUTPUT PHOTO IC; Mounting Feature: SURFACE MOUNT; Nominal Hysteresis Ratio: .6; Minimum Supply Voltage: 4 V; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
OPT4001DTSR
OPT4001DTSR by Texas Instruments is a complex logic output photo IC with 8 terminals. It operates in an infrared range, has a min supply voltage of 1.6V, and can withstand temperatures from -40 to 85°C. Ideal for surface mount applications requiring precise light sensing capabilities.
SD5630-001
Micro Switch
LOGIC OUTPUT PHOTO IC; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Current: 15 mA; Minimum Operating Temperature: -40 Cel; Nominal Supply Voltage: 16 V; Maximum Operating Temperature: 100 Cel;
OPT101P-JG4
The Texas Instruments OPT101P-JG4 is a single linear output photo IC with a size of 2.29mm, operating b/w 0-70°C. It has a min supply voltage of 2.7V and is commonly used as an amplifier in various applications due to its square shape and nickel palladium gold terminal finish.
TSL260
TSL260 by Texas Instruments is a 1.5mm linear output photo IC sensor with a single configuration. Operating b/w -25°C to 85°C, it has a min supply voltage of 3V and nominal voltage of 5V. Ideal for applications requiring IR detection, it features through-hole mounting and can handle up to 0.01A on-state current.
Honeywell Sensing And Control
Honeywell's SD5630-001 is a Logic Output Photo IC sensor with a max operating temp of 100°C and min of -40°C. It has a max supply current of 15mA and nominal voltage of 16V, suitable for through-hole mounting applications in various industries.
RPM7137-H5R
ROHM
ROHM's RPM7137-H5R is a COMPLEX LOGIC OUTPUT PHOTO IC with 4.5V min supply voltage and 75°C max operating temp. Ideal for REMOTE CONTROL applications, it features IR range, 1.5mA max supply current, and 0.002A max on-state current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SPS400
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel; Nominal Supply Voltage: 5 V;
SPS401
SPS402
SPS404
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 60 Cel; Nominal Supply Voltage: 5.3 V;
SPS404-1
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Nominal Supply Voltage: 5.3 V; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel;
SPS408
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Nominal Supply Voltage: 5.3 V; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 60 Cel;
SPS409
SPS409-1
SPS410
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Nominal Supply Voltage: 5 V; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel;
SPS410-1
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 60 Cel; Nominal Supply Voltage: 5 V;
SPS417
SPS418
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel; Nominal Supply Voltage: 5.3 V;
SPS418-1
Sanyo Electric
Photo ICs; Mounting Feature: THROUGH HOLE MOUNT; Nominal Supply Voltage: 5 V; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 60 Cel;
SPS417-1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved