Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA9764 by Onsemi is a Common Cathode LED Display with Peak Wavelength of 630nm. It features SMART/NORMAL 5x7 Dot Matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring a 16mm Red display, such as digital clocks or temperature indicators.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
UHIMA Technologies
Corohmni
Corphita
Allows for easier control and interfacing with other components, making this LED display versatile and compatible with various systems.
The specific wavelength of 630 nm ensures a bright and vibrant red color display, ideal for applications where visibility and clarity are important.
The SMART/NORMAL 5 x 7 dot matrix configuration offers flexibility in displaying characters and symbols, making this LED display suitable for a wide range of applications including text and graphic displays.
With a maximum operating temperature of 50 °C, this LED display can withstand relatively high temperatures without compromising performance, ensuring reliable operation in various environmental conditions.
The low minimum operating temperature of -20 °C ensures that this LED display can function even in colder environments, making it suitable for applications that require operation in diverse temperature ranges.
The red color output at the specified wavelength provides excellent visibility and contrast, making this LED display ideal for applications where a distinct red color is desired.
The 16 mm display height offers clear and easily readable characters, making this LED display suitable for applications where visibility from a distance is important.
LED Displays SLA9764 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA9764 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
5082-7653
Fairchild Semiconductor's 5082-7653 LED display features common cathode configuration, 0.03A max forward current, and peak wavelength of 635nm. Ideal for smart/normal numeric displays with high efficiency red color. Operating temp range -40 to 85°C makes it suitable for various applications.
TIL302A
Texas Instruments
TIL302A by Texas Instruments is a red LED display with 6.9mm height, forward voltage of 3.8V, and peak wavelength of 660nm. It operates b/w 0-70°C, ideal for numeric displays in various applications like digital clocks and electronic meters due to its low forward current of 0.03A.
HDSP-2131
Broadcom
HDSP-2131 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 583nm. It operates b/w -55°C to 85°C, featuring yellow color and complex configuration. Ideal for applications requiring high visibility and versatile character display in various environments.
HDSP-5523
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Display Height: 14.2 mm; Color At Wavelength: Red; Maximum Operating Temperature: 100 Cel; Color: HIGH EFFICIENCY RED;
LTC-4624JD
Lite-on Technology
Lite-on Technology's LTC-4624JD is a COMMON ANODE, MULTIPLEXED LED display with 3 digits and decimal point. Featuring HYPER RED color at 650nm peak wavelength, it operates b/w -35 to 85 °C with 0.025A forward current. Ideal for clock displays due to its 10mm height and 0.65mcd luminous intensity.
TIL381-9
TIL381-9 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has common cathode configuration, 3mm display height, and red color at wavelength. Operating temperature ranges from -25°C to 85°C with max forward voltage of 2.1V. Ideal for applications requiring numeric displays in various electronic devices.
HDSP-F513
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.5 V; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 566; Display Height: 10 mm;
HDSP5601
Three-five Systems
HDSP5601 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 566nm. It has a display height of 14mm and operates b/w -40°C to 100°C. Commonly used in applications requiring green color at a max forward voltage of 2.5V.
LTP2157AG
Taiwan Liton Electronic C
LTP2157AG by Taiwan Liton Electronic C is a COMMON ANODE, 1 DIGIT LED Display with 0.013A Forward Current and 565nm Peak Wavelength. Ideal for SMART/NORMAL 5 X 7 DOT MATRIX applications, it operates b/w -35°C to 85°C, emitting GREEN light at a height of 50.8mm with a max voltage of 2.8V.
PSA23-11SRWA
Kingbright Electronic
Kingbright Electronic's PSA23-11SRWA is a 16 SEG alphanumeric LED display with common anode configuration. It has a max forward current of 0.03A and operates b/w -40°C to 85°C. Ideal for applications requiring a super bright red display, standing at 56.8mm in height.
TIL375
TIL375 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 590nm. It has 4 characters, orange color at wavelength, and 13mm display height. With max operating temp of 85°C and min of -25°C, it operates at a max forward voltage of 3.5V. Ideal for applications requiring numeric displays in various electronic devices.
HDSP2113S
Osram Opto Semiconductors
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: TTL COMPATIBLE, BUILT IN MEMORY, WITH DECODER/MULTIPLEXER/DRIVER; Maximum Operating Temperature: 85 Cel; No. of Functions: 8;
SLA5784
SLA5784 by Onsemi is a Common Cathode LED Display with peak wavelength of 565nm. It features SMART/NORMAL 5x7 dot matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring green/red display, with a height of 18mm.
TIL363
TIL363 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 590nm. With 2 characters, it displays in orange color at 13mm height. Operating b/w -25°C to 85°C, it has a max forward voltage of 3.5V, ideal for applications requiring compact and bright numeric displays.
3062
Nte Electronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .02 A; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 7.62 mm; Color: ORANGE; No. of Functions: 1;
HDSP-5507
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 0.5 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .03 A; Maximum Operating Temperature: 100 Cel;
SA56-11SRWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Additional Features: IC COMPATIBLE; No. of Functions: 1; Maximum Forward Current: .03 A; Minimum Operating Temperature: -40 Cel;
HDSP-816E
HDSP-816E by Broadcom is a 7-segment numeric LED display with common cathode configuration. It has a max forward current of 0.025 A and peak wavelength of 635 nm, making it ideal for applications requiring high efficiency red color displays. With a display height of 20 mm and operating temperatures ranging from -25 to 85 °C, this LED is suitable for various electronic projects.
HDSP-U503
Broadcom's HDSP-U503 is a COMMON CATHODE 7-segment LED display with peak wavelength of 566nm. It operates b/w -25°C to 90°C, with max forward current of 0.03A and height of 8mm. Ideal for applications requiring high performance green color displays.
LDD-C516RI
Lumex
Lumex LDD-C516RI is a COMMON CATHODE 2-digit LED display with peak wavelength of 660nm. It has max forward current of 0.03A and max operating temp of 85°C. Ideal for numeric displays in applications requiring bright red color and compact size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA9723
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; No. of Characters: 1; Color At Wavelength: Green/Red; Peak Wavelength (nm): 630; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode;
SLA9724
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Green/Red; Display Height: 18 mm; No. of Characters: 1; Maximum Operating Temperature: 50 Cel;
SLA9733
16 X 16 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 630; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Color At Wavelength: Red;
SLA9734
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Red; Display Height: 40 mm; Peak Wavelength (nm): 630; Minimum Operating Temperature: -20 Cel;
SLA9744
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Red; Configuration: Common Cathode; Maximum Operating Temperature: 50 Cel; No. of Characters: 1; Minimum Operating Temperature: -20 Cel;
SLA9783
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 630; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel;
SLA9784
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Configuration: Common Cathode; Display Height: 15 mm; Peak Wavelength (nm): 630;
SLA9903
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Anode; Color At Wavelength: Green-Yellow/Red; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; No. of Characters: 1;
Sanyo Electric
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green/Red; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Cathode; No. of Characters: 1; Display Height: 18 mm; Maximum Operating Temperature: 50 Cel;
SLA9764
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Characters: 1; Configuration: Common Cathode; Peak Wavelength (nm): 630;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; JESD-609 Code: e0; Peak Wavelength (nm): 630; Display Height: 15 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 15 mm; Peak Wavelength (nm): 630; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 630; Display Height: 40 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; JESD-609 Code: e0; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Display Height: 32 mm; Configuration: Common Cathode;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved