Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL1405-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm, red color. It has 4 characters and 6mm display height. Ideal for applications requiring temperature range from -20 °C to 65°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
TANS Electronics
SupplyDigital Components
Corphita
Problanco Electronics
UHIMA Technologies
Kulean Microsystems
Corohmni
The peak wavelength of 700nm indicates that this LED display emits a vibrant red color, making it visually appealing and easy to read.
The optoelectronic type being a 7 segment numeric LED display allows for clear and easy to read numerical information to be displayed.
With a maximum operating temperature of 65 °C, this LED display is suitable for use in various environments without risk of overheating.
The minimum operating temperature of -20 °C ensures that this LED display can function reliably even in colder conditions.
Having 4 characters allows for the display of more information at once, making it efficient for conveying messages or data.
The red color emitted at a specific wavelength adds to the visibility and clarity of the displayed information.
The 6mm display height ensures that the information displayed is easily visible and legible from a distance, making it suitable for various applications.
LED Displays SL1405-20 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL1405-20 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech
Fairchild Semiconductor
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Microsemi
Mde Semiconductor
Alpha & Omega Semiconductor
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Taitron Components
HDSP-B04E
Agilent Technologies
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Characters: 4; Maximum Operating Temperature: 105 Cel; Maximum Forward Voltage: 2.6 V;
157112V12700
Wuerth Elektronik & Kg
157112V12700 by Wurth Elektronik is a COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT LED display with a max forward current of 0.02 A. It is ideal for applications requiring a 7 SEG NUMERIC LED DISPLAY with a display height of 7.62 mm and a bright green color.
HDSP-316Y
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Color: YELLOW; Maximum Forward Voltage: 2.5 V;
GW5BWF15L00
Sharp Corporation
Sharp Corporation's GW5BWF15L00 is a COMPLEX LED display with 0.72A max forward current. Featuring SINGLE COLOR LED DISPLAY CLUSTER, it operates b/w -30 to 90°C. Ideal for applications requiring WHITE light emission in various environments.
HDSP-K123
Broadcom
The Broadcom HDSP-K123 LED display features 2 digits with decimal point, common cathode configuration, and peak wavelength of 645nm. Ideal for smart/normal numeric displays in applications requiring red color output. Operates b/w -20°C to 100°C with a max forward current of 0.015A and voltage of 2.2V.
HDLG-2416
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 4; Configuration: COMPLEX; Display Height: 5 mm; Peak Wavelength (nm): 568;
HDSP-5507
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: .5; Peak Wavelength (nm): 635; Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED;
HCMS-2975
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Display Height: 4.57 mm; Color At Wavelength: Red; Maximum Forward Voltage: 5.5 V;
HCMS-3977
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 8; Maximum Forward Voltage: 3.3 V; Color: GREEN; Minimum Operating Temperature: -40 Cel;
HDSP-5507 by Broadcom is a COMMON ANODE LED Display with 0.5 digit, 0.03A max current, and 635nm peak wavelength. Ideal for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications. Operating temp: -40 to 100°C, display height of 14.2mm, and high efficiency red color at 2.5V forward voltage.
HDSP-0794
HDSP-0794 by Broadcom is a SMART/NORMAL 4x7 dot matrix LED display with peak wavelength of 635nm. It has a max forward current of 0.01A and operates b/w -55°C to 100°C. Ideal for applications requiring high efficiency, high bright red color displays in various electronic devices.
HDSP-7513
HDSP-7513 by Broadcom is a COMMON CATHODE LED display with 7.6mm height, emitting HIGH EFFICIENCY RED light at 635nm wavelength. It has a max forward current of 0.015A and operates b/w -40°C to 100°C. Ideal for SMART/NORMAL applications requiring a single digit display with decimal point.
HDSP-A22C
16 SEG ALPHANUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Color At Wavelength: Orange-Red; Display Height: 13.8 mm; Minimum Operating Temperature: -40 Cel;
HCMS-2973
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 5.5 V; JESD-609 Code: e0; Display Height: 5.08 mm;
5082-7651
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 100 Cel; Color At Wavelength: Red; JESD-609 Code: e0;
DSM7TA56106T
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .03 A; Color At Wavelength: Red; Minimum Operating Temperature: -40 Cel; Display Height: 10.92 mm;
SC52-11SRWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 13.2 mm; Maximum Operating Temperature: 85 Cel; Color: SUPER BRIGHT RED; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Additional Features: IC COMPATIBLE;
SCD55102A
Osram Opto Semiconductors
Osram Opto Semiconductors' SCD55102A is a SMART/NORMAL 5x5 dot matrix LED display with peak wavelength of 630nm. It has max forward current of 0.1A and operates b/w -40°C to 85°C. Ideal for applications requiring high efficiency red or orange color displays in complex configurations.
SMA-393LEG/W
American Opto Plus Led
LED Displays;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL1495
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Maximum Forward Current: .015 A; Maximum Operating Temperature: 65 Cel; Configuration: COMMON ANODE, 3.5 DIGITS WITH DECIMAL POINT; No. of Functions: 3.5;
SL1453P
7 SEG NUMERIC LED DISPLAY; Display Height: 23 mm; Peak Wavelength (nm): 700; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; No. of Characters: 4;
SL1435-01
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; No. of Characters: 4; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700; Maximum Operating Temperature: 75 Cel;
SL1493T
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; Display Height: 15 mm; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 700;
SL1459L
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Display Height: 15 mm; Maximum Operating Temperature: 65 Cel; No. of Characters: 4; Peak Wavelength (nm): 700;
SL1450L
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Peak Wavelength (nm): 700; Minimum Operating Temperature: -20 Cel; Display Height: 15 mm; No. of Characters: 4;
SL1496
7 SEG NUMERIC LED DISPLAY; Display Height: 6 mm; Color At Wavelength: Red; Configuration: COMMON CATHODE, 3.5 DIGITS WITH DECIMAL POINT; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -25 Cel;
SL1454P
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Display Height: 23 mm; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 700;
SL1436
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Configuration: Common Cathode; Display Height: 8 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel;
SL1490L
7 SEG NUMERIC LED DISPLAY; Display Height: 15 mm; Color At Wavelength: Red; Peak Wavelength (nm): 700; Maximum Operating Temperature: 65 Cel; No. of Characters: 4;
SL1475-04
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700; No. of Characters: 4; Color At Wavelength: Red; Display Height: 8 mm;
SL1447
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Display Height: 15 mm; Color At Wavelength: Red; Peak Wavelength (nm): 700; Maximum Operating Temperature: 65 Cel;
SL1494T
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 700; Display Height: 15 mm;
SL1435
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Display Height: 8 mm; Maximum Operating Temperature: 75 Cel; No. of Characters: 4; Color At Wavelength: Red;
SL1452
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; Color At Wavelength: Red; Peak Wavelength (nm): 700; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -20 Cel;
SL1405
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; No. of Functions: 3.5; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 65 Cel; No. of Characters: 3.5;
SL1406-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 700; No. of Characters: 4; Display Height: 6 mm; Color At Wavelength: Red;
SL1436-01
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Peak Wavelength (nm): 700; No. of Characters: 4; Display Height: 8 mm; Minimum Operating Temperature: -20 Cel;
SL1476-04
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Display Height: 8 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 65 Cel; Color At Wavelength: Red;
Sanyo Electric
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Peak Wavelength (nm): 700; JESD-609 Code: e0; Display Height: 6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved