Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
REF3012TB-GT3 by Onsemi is a voltage reference with adjustable output (V) ranging from 1.2475 V to 1.2525 V, suitable for industrial applications. It operates within a temperature range of -40°C to 85°C and has a nominal voltage (Vsup) of 3 V. This small outline, low profile component is surface mountable and features a three-terminal design.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Ampacity Inc.
$1.500
Advanced Electronics
$4.829
$4.394
$3.960
AZTECH Wire
$19.131
Aztec Data Supply Inc.
$20.088
SupplyDigital Components
Problanco Electronics
Kepictronics
Kulean Microsystems
Argo Parts USA
Corphita
TANS Electronics
Continental Prestige Electronics
UHIMA Technologies
Aranea Global
Corohmni
Microchip USA
PLASTIC/EPOXY - The use of plastic/epoxy material makes this product lightweight and durable, suitable for various applications.
YES - This feature allows for easy and convenient installation on circuit boards, making it ideal for small and compact designs.
YES - The ability to adjust the output voltage provides flexibility and customization for specific voltage requirements.
RECTANGULAR - The rectangular shape enables efficient use of space and easy integration into existing circuit designs.
3 V - The 3V nominal supply voltage is a common and widely available power source, making this product compatible with many systems.
3 - The three terminals provide a stable electrical connection and easy interfacing with other components.
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH - The small outline and low profile design save space and allow for compact and lightweight product designs.
85 °C - The high maximum operating temperature range ensures reliable performance in various environmental conditions.
1.2475 V - The precise minimum output voltage ensures accurate and stable voltage references for applications requiring low voltages.
40 °C - The low minimum operating temperature range allows for use in cold environments without compromising performance.
Nickel/Palladium/Gold (Ni/Pd/Au) - The use of nickel/palladium/gold finish ensures corrosion resistance and reliable electrical connections.
1.2525 V - The precise maximum output voltage ensures accurate and stable voltage references for applications requiring higher voltages.
DUAL - The dual terminal position provides redundancy and increased reliability for critical applications.
1.22 mm - The low maximum seated height offers flexibility for tight space constraints in product designs.
1.3 mm - The narrow width allows for compact and space-saving integration into circuit designs.
THREE TERMINAL VOLTAGE REFERENCE - This product's three-terminal design simplifies circuit connections and provides stable voltage references.
2.7 V - The low minimum supply voltage requirement allows for compatibility with a wide range of power sources.
30 - The maximum time at peak reflow temperature ensures reliable soldering and assembly processes.
260 - The high peak reflow temperature tolerance allows for robust soldering and assembly techniques.
2.92 mm - The compact length enables space-efficient placement within circuit designs.
INDUSTRIAL - The industrial temperature grade ensures reliable performance in harsh operating conditions.
CMOS - The CMOS technology offers low power consumption and high noise immunity, making it ideal for energy-efficient applications.
GULL WING - The gull wing terminal form provides mechanical strength and secure mounting on circuit boards.
0.95 mm - The small terminal pitch allows for high-density mounting on PCBs, ideal for miniaturized product designs.
888 ppm/°C - The maximum voltage temperature coefficient ensures stable voltage output over a wide temperature range.
5.5 V - The high maximum supply voltage provides compatibility with a wide range of power sources.
1.25 V - The stable nominal output voltage provides a reliable voltage reference for various electronic circuits.
Voltage References REF3012TB-GT3 attributes and parameters. Explore more Voltage References devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Max Voltage Temp Coef:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trim or Adjustable Output (V):
Width (mm):
REF3012TB-GT3 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 20/Dec/2013
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
Taitron Components
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Fairchild Semiconductor
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
TL431AIDR2G
TL431AIDR2G by Onsemi is a voltage reference IC with adjustable output (V) from 2.44 to 2.55 V, suitable for industrial applications. It operates b/w -40 to 85°C, has a max output current of 0.1 A, and a supply voltage range of 2.495 to 36 V.
LM4040DIZ-5.0/NOPB
National Semiconductor
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TO-92; Package Shape: ROUND; Surface Mount: NO;
LT1461CCS8-5#PBF
Analog Devices
LT1461CCS8-5#PBF by Analog Devices is a 3-terminal voltage reference with nominal output voltage of 5V. It operates b/w 0 to 70°C, with a min supply voltage of 5.5V and max of 20V. Ideal for applications requiring precise voltage references in small outline packages.
TL431CDBZR
Nexperia
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL431ACDBVR
Rochester Electronics
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM431CIM3X/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL431CDBZR,215
NXP Semiconductors
TL431CDBZR,215 by NXP Semiconductors is a voltage reference IC with adjustable output (2.44-2.55V) and max current of 0.1A. It's a small outline package suitable for various applications requiring precise voltage regulation in commercial temperature range from 0 to 70°C.
LM4040CEM3-3.0-T
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF3025AIDBZT
Xilinx
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM4040DIM3-5.0/NOPB
Texas Instruments
LM4040DIM3-5.0/NOPB by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 5V and ±1% max voltage tolerance. It operates b/w -40°C to 85°C, making it suitable for industrial applications requiring precise voltage regulation in compact spaces due to its small outline and thin profile package style.
LM431AIM3X/NOPB
REF195ESZ-REEL
Analog Devices' REF195ESZ-REEL is a voltage reference with 5V nominal output, 0.04% max voltage tolerance, and 5ppm/°C max voltage temp coef. It is ideal for industrial applications requiring precise voltage regulation in a compact small outline package.
TL431CDBVT
LM431BCM3X/NOPB
LM431BCM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.47-2.52V) and max output current of 0.1A, suitable for industrial applications. It operates b/w -40 to 85°C, has a small outline package style, and is surface mountable for compact designs.
ADR3425ARJZ-R7
ADR3425ARJZ-R7 by Analog Devices is a voltage reference with a nominal output voltage of 2.5V and a max supply voltage of 5.5V, suitable for automotive applications. It features a small outline package style, low profile design, and shrink pitch technology, making it ideal for space-constrained environments. With a temperature grade of automotive and max operating temperature of 125°C, this CMOS technology-based device offers precise voltage regulation in harsh conditions.
ZTLV431AFTA
Diodes Incorporated
ZTLV431AFTA by Diodes Incorporated is a voltage reference IC with a min output voltage of 1.209 V and max output voltage of 1.271 V. It is used in automotive applications and has a small outline, thin profile package style.
MAX6103EUR+T
Maxim Integrated
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL431ACDBVR by Texas Instruments is a 3-terminal voltage reference with adjustable output from 2.47V to 2.52V, suitable for applications requiring precise voltage regulation. This small outline, low profile IC has a max output current of 0.1A and operates b/w -40°C to +70°C, making it ideal for commercial temperature grade projects. With a max supply voltage of 36V and excellent voltage tolerance of 1%, this bipolar technology-based device is widely used in various electronic circuits for stable voltage references.
ZR431LF01TA
Diodes Inc.'s ZR431LF01TA is a voltage reference IC with adjustable output (1.228-1.252V) and 1% max voltage tolerance. It operates in industrial temperature range (-40 to 85°C), ideal for precision applications requiring stable voltage references in compact designs. Package: Small outline, thin profile, shrink pitch, suitable for surface mount assembly.
LM4040C50IDBZR
LM4040C50IDBZR by Texas Instruments is a 5V voltage reference with a min output voltage of 4.975V and max of 5.025V. This small outline, thin profile IC is ideal for industrial applications requiring precise voltage regulation in a compact form factor. With a temperature coefficient of 100 ppm/°C, it ensures stable performance across a wide operating range from -40 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADR280ARTZ-REEL7
ADR280ARTZ-REEL7 by Analog Devices is a voltage reference with output voltage range of 1.195V to 1.205V, suitable for industrial applications. It operates in temperatures from -40°C to 85°C and has a max supply voltage of 5.5V, making it ideal for various electronic systems requiring precise voltage regulation.
REF3025AIDBZT by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 2.5V, suitable for automotive applications. It operates b/w -40 to 125°C, with a max supply voltage of 5.5V and a temperature coefficient of 75 ppm/°C. This small outline package has a rectangular shape and is surface mountable, making it ideal for compact designs requiring precise voltage references.
REF3033AIDBZR
REF3033AIDBZR by Texas Instruments is a 3-terminal voltage reference with nominal output of 3.3V, suitable for automotive applications. It operates b/w -40 to 125°C, with a max supply voltage of 5.5V and voltage tolerance of 0.2%. The package style is small outline, thin profile, shrink pitch.
REF3012AIDBZT
REF3012AIDBZT by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 1.25V, suitable for automotive applications. It operates in temperatures ranging from -40 to 125°C and has a max supply voltage of 5.5V, making it ideal for precision voltage regulation in compact electronic devices.
REF3125AIDBZT
REF3125AIDBZT by Texas Instruments is a 3-terminal voltage reference with nominal output voltage of 2.5V, suitable for automotive applications. It operates in temperature range of -40 to 125°C and has a max supply voltage of 5.5V, making it ideal for precision voltage regulation in compact electronic devices.
REF3012AIDBZR
REF3012AIDBZR by Texas Instruments is a 3-terminal voltage reference with a nominal output of 1.25V, suitable for automotive applications. It operates b/w -40 to 125°C, with a max supply voltage of 5.5V and voltage tolerance of ±0.2%. The package style is small outline, thin profile, shrink pitch, making it ideal for compact designs.
REF3030AIDBZR
REF3030AIDBZR by Texas Instruments is a 3-terminal voltage reference with nominal output of 3V. It operates b/w -40 to 125°C, with a voltage tolerance of 0.2%. This CMOS technology device is ideal for automotive applications due to its small outline and thin profile package.
REF3033AIDBZRG4
REF3033AIDBZRG4 by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 3.3V and max supply voltage of 5.5V, suitable for automotive applications. It operates in temperatures ranging from -40 to 125°C, with a max seated height of 1.12mm and terminal pitch of 0.95mm, making it ideal for compact designs requiring precise voltage regulation within a tight temperature range.
REF3125AIDBZR
REF3125AIDBZR by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 2.5V and max output current of 0.01A. It operates in automotive-grade temperature range (-40 to 125 °C) and has a small outline, thin profile package for surface mount applications. The device offers a max voltage tolerance of 0.2% making it suitable for precision voltage reference applications.
REF3025AIDBZRG4
REF3025AIDBZRG4 by Texas Instruments is a voltage reference with a nominal output voltage of 2.5V, suitable for automotive applications. It operates b/w -40 to 125°C, with a max supply voltage of 5.5V and terminal pitch of 0.95mm. The package style is small outline, thin profile, shrink pitch in plastic/epoxy material.
REF3025AIDBZTG4
REF3025AIDBZTG4 by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 2.5V, suitable for automotive applications. It operates within a temperature range of -40 to 125°C and has a max supply voltage of 5.5V, offering a max output voltage tolerance of 0.2%.
REF3030AIDBZT
REF3030AIDBZT by Texas Instruments is a 3-terminal voltage reference with nominal output voltage of 3V. It operates in automotive temperature grade range from -40 to 125°C, offering a max voltage tolerance of 0.2%. With a small outline and thin profile package style, it's ideal for applications requiring precise voltage references in compact spaces.
REF3325AIDBZR
REF3325AIDBZR by Texas Instruments is a 3-terminal voltage reference with a nominal output of 2.5V and voltage tolerance of 0.15%. Operating temperature ranges from -40 to 125 °C, making it suitable for automotive applications. This small outline, thin profile package is surface mountable and has a terminal pitch of 1.9mm.
REF3033AIDBZTG4
REF3033AIDBZTG4 by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 3.3V and max supply voltage of 5.5V. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications requiring precise voltage references in compact designs. The package style is small outline, thin profile, shrink pitch, ideal for surface mount PCBs.
REF3033AIDBZT
REF3033AIDBZT by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 3.3V and max supply voltage of 5.5V, suitable for automotive applications. It operates in temperatures ranging from -40 to 125°C, with a max seated height of 1.12mm and terminal pitch of 0.95mm, making it ideal for compact designs requiring precise voltage regulation.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved