Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
QEB373 by Onsemi is a 2mm IR LED with peak wavelength of 880nm. It has max forward current of 0.05A and operates b/w -40 to 100°C. Ideal for surface mount applications requiring a round, AlGaAs semiconductor IR LED with matte tin finish and viewing angle of 24°.
Median Price
$0.750
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.380
1k+ parts
$0.281
10k+ parts
$0.232
DigiKey
$0.381
$0.297
$0.248
Flip Electronics (Authorized)
-
Rochester
$0.275
$0.228
$0.203
Digiode
$0.214
Vyrian
$0.225
ACDS - Activité Composants Distribution Service
Flip Electronics
Corphita
$0.202
Corohmni
Component Stockers USA
$99.990
Kepictronics
TANS Electronics
SupplyDigital Components
A-Z Elektronik GmbH
Kulean Microsystems
Authorized Procurement Solutions
Perfect Parts
Supply Digital
UHIMA Technologies
Problanco Electronics
SINGLE configuration simplifies installation and allows for easy replacement if needed.
Compact size makes it suitable for applications where space is limited.
Low power consumption helps in energy efficiency and longer lifespan.
Peak wavelength of 880 nm provides efficient infrared illumination for various applications.
Infrared LED technology ensures reliable performance and long-lasting use.
High operating temperature range allows for use in various environments without risking damage.
Round shape makes it easy to integrate into different designs and setups.
Low minimum operating temperature ensures functionality even in cold conditions.
Matte tin terminal finish provides good conductivity and corrosion resistance.
Low reverse voltage rating ensures protection against reverse polarity and voltage spikes.
AlGaAs semiconductor material offers high efficiency and stability for consistent performance.
Wide viewing angle of 24° provides good coverage and flexibility in lighting applications.
Surface mount design simplifies installation and allows for secure mounting on different surfaces.
Low forward voltage ensures efficient operation without excessive power consumption.
Infrared LEDs QEB373 attributes and parameters. Explore more Infrared LEDs devices from Onsemi
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Semiconductor Material:
Shape:
Size:
Sub-Category:
Terminal Finish:
Viewing Angle:
QEB373 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
SPC TECHNOLOGY/ MULTICOMP
Transys Electronics
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SE302A
Renesas Electronics
Infrared LEDs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .000001 s; JESD-609 Code: e0; Spectral Bandwidth: 60 m;
TLN205
Toshiba
INFRARED LED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; JESD-609 Code: e0; Maximum Operating Temperature: 75 Cel; Nominal Output Power: 10 W;
TIL903-1
TIL903-1 by Texas Instruments is an Infrared LED with peak wavelength of 880nm, max forward current of 0.2A, and viewing angle of 10°. It operates b/w -60°C to 125°C, has response time of 0.0000006s, and reverse voltage up to 3V. Ideal for applications requiring precise IR illumination in a through-hole mounting setup.
TLN117(A)
INFRARED LED; Shape: ROUND; Maximum Forward Current: .05 A; Size: 1.5 mm; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE;
TSHA4401
Telefunken Microelectronics
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Semiconductor Material: GaAlAs; Maximum Response Time: .0000005 s;
OP240B
Tt Electronics Plc
OP240B by Tt Electronics Plc is an INFRARED LED with a peak wavelength of 890nm and max forward current of 0.05A. With a viewing angle of 40°, it's ideal for applications requiring fast response times and operating temperatures ranging from -40 to 100°C.
SFH4650-Z
Osram Opto Semiconductors
Osram Opto Semiconductors SFH4650-Z is an INFRARED LED with peak wavelength of 860nm, forward current of 0.1A, and output power of 60W. Ideal for applications requiring a viewing angle of 12°, spectral bandwidth of 30m, and surface mounting feature.
TLN203
INFRARED LED; Nominal Output Power: 3.5 W; Maximum Forward Current: .05 A; Size: 3 mm; Minimum Operating Temperature: -20 Cel; Shape: ROUND;
SFH4534
Infineon Technologies
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 920; Maximum Forward Current: 1 A; Maximum Reverse Voltage: 3 V;
TSAL6100-ES21
Vishay Intertechnology's TSAL6100-ES21 is an infrared LED with a peak wavelength of 940nm and max forward current of 0.1A. Ideal for applications requiring IR transmission, it operates b/w -40°C to 85°C with a viewing angle of 20°.
ASDL-4671-C22
Broadcom
INFRARED LED; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Shape: ROUND; Size: 3 mm; No. of Functions: 1;
SFH482-2
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .2 A; Maximum Response Time: .0000006 s; Semiconductor Material: AlGaAs;
SLR835C
SLR835C by Onsemi is an Infrared LED with peak wavelength of 880nm, forward current of 0.1A, and viewing angle of 10°. Ideal for applications requiring fast response time (6ns), it operates b/w -25 °C to 80°C temperature range and has a max reverse voltage of 5V.
R9097
R9097 by Onsemi is an Infrared LED with a peak wavelength of 945nm and max forward current of 0.1A. It operates b/w -25 °C to 80°C, has a viewing angle of 40°, and can withstand a max reverse voltage of 5V. Ideal for applications requiring infrared illumination in various electronic devices.
SFH4775S
INFRARED LED; Terminal Finish: GOLD; JESD-609 Code: e4;
SFH4546
SFH4546 by Osram Opto Semiconductors is a single configuration infrared LED with a size of 4.85mm and peak wavelength of 950nm. It has a max forward current of 0.1A, making it ideal for applications requiring high power output in infrared illumination or sensing systems. With a viewing angle of 20° and spectral bandwidth of 42m, this IR LED is suitable for use in security cameras, proximity sensors, and industrial automation equipment.
VSMY2853RG
Vishay Intertechnology's VSMY2853RG is a 1.8mm INFRARED LED with peak wavelength of 850nm and max forward current of 0.1A. Ideal for applications requiring high output power, it operates b/w -40°C to 85°C, making it suitable for various optoelectronic designs.
NDL5302
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Semiconductor Material: InGaAs; JESD-609 Code: e0; Spectral Bandwidth: 160 m;
OD8365BA
INFRARED LED; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 1.5 V; Minimum Operating Temperature: -10 Cel; Spectral Bandwidth: 140 m;
HSDL-4271
INFRARED LED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Size: 5 mm; Configuration: SINGLE; JESD-609 Code: e1; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QEB363.ZR
Qt Optoelectronics
QEB363.ZR by Qt Optoelectronics is a 1.9mm ROUND INFRARED LED with a Peak Wavelength of 940nm and Max Forward Current of 0.05A. It operates b/w -40 to 85 °C, making it ideal for applications requiring precise infrared illumination in compact spaces.
QEB363ZR
QEB363ZR by Onsemi is a 2mm IR LED with peak wavelength of 940nm. It has max forward current of 0.05A and max forward voltage of 1.6V, suitable for surface mount applications in infrared communication systems due to its narrow viewing angle of 24°.
INFRARED LED; Maximum Operating Temperature: 85 Cel; Size: 1.9 mm; Configuration: SINGLE; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Size: 2 mm; Maximum Forward Voltage: 1.6 V;
QEB363GR
INFRARED LED; Size: 1.9 mm; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Shape: ROUND; Maximum Forward Current: .05 A;
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Functions: 1; Viewing Angle: 24 deg; Minimum Operating Temperature: -40 Cel;
QEB363.GR
INFRARED LED; Peak Wavelength (nm): 940; Minimum Operating Temperature: -40 Cel; Shape: ROUND; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A;
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Peak Wavelength (nm): 940; Maximum Forward Current: .05 A;
QEB363
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Semiconductor Material: GaAs; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE;
QEB363YR
QEB363YR by Onsemi is a 2mm IR LED with peak wavelength of 940nm. It has max forward current of 0.05A and operates b/w -40 to 100°C. Ideal for surface mount applications requiring infrared illumination in a compact form factor.
QEB373GR
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Peak Wavelength (nm): 880; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE;
QEB373ZR
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .05 A; Viewing Angle: 24 deg; JESD-609 Code: e3;
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Viewing Angle: 24 deg;
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 1.6 V; Semiconductor Material: GaAs;
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .05 A; Viewing Angle: 24 deg;
QEB373YR
INFRARED LED; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Viewing Angle: 24 deg; Semiconductor Material: AlGaAs; Maximum Forward Current: .05 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved