Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV894530MWTXG by Onsemi is a switching regulator with 1.2A output current and 2700 kHz max frequency. It features a small outline package, tin finish terminals, and dual terminal position. Ideal for applications requiring high-frequency power conversion in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$16.010
Perfect Parts
Problanco Electronics
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Corphita
Microchip USA
Corohmni
UHIMA Technologies
Provides good thermal conductivity and electrical insulation, ensuring reliability and durability.
Allows for easy installation onto PCBs, saving time and effort during assembly.
Optimal shape for efficient use of PCB space and compact design.
Provides sufficient connectivity options for various applications.
Compact size allows for versatile placement within electronic devices.
Offers precise control over current output for efficient power regulation.
Provides good conductivity and corrosion resistance for consistent performance.
Allows for flexibility in PCB layout and connection options.
Enables fast response and efficient power conversion.
Provides sufficient power output for a wide range of applications.
Lead-free terminal form for environmentally friendly design.
Fine pitch for compact layout and connection options.
Designed to withstand moderate levels of moisture exposure, ensuring reliability in various environments.
Switching Regulators & Controllers NCV894530MWTXG attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
NCV894530MWTXG Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
General Instrument
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LL4148
Synsemi
LM22675MR-5.0/NOPB
Texas Instruments
LM22675MR-5.0/NOPB by Texas Instruments is a switching regulator with 1A output current, 500kHz max switching frequency, and VOLTAGE-MODE control technique. Ideal for automotive applications due to its low profile design, it operates b/w -40°C to 125°C temperature range efficiently regulating voltage from 4.5V to 42V down to a min of 1.285V.
TPS54260DRCR
TPS54260DRCR by Texas Instruments is a switching regulator with 2.5A output current, 2500 kHz max switching frequency, and 58V max output voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
LTM4644IY-1#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54620RGYR
TPS54620RGYR by Texas Instruments is a 6A BUCK switching regulator with 0.8V min output, 15V max output, and 1600kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and current-mode control technique.
LMR50410YFQDBVRQ1
LMR50410YFQDBVRQ1 by Texas Instruments is a switching regulator with 1A output current, 28V max output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level and -40°C to 150°C operating temperature range.
MCP16331T-E/CHVAO
Microchip Technology
MCP16331T-E/CHVAO by Microchip is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style. Supports buck switcher config., PWM control technique, and has a max switching frequency of 550kHz.
LTC3646EMSE#PBF
Analog Devices
LTC3646EMSE#PBF by Analog Devices is a current-mode switching regulator with 16 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, accepting input voltages from 4-40V and providing a stable output of 5V. This compact device in small outline package is ideal for industrial applications requiring efficient power management.
LM2576HVT-ADJLF03/NOPB
Texas Instruments' LM2576HVT-ADJLF03/NOPB is a 5-terminal switching regulator with max output current of 3A, operating b/w -40 to 125°C. Ideal for automotive applications, it supports input voltage range from 8V to 60V and offers a max switching frequency of 63kHz in a flange mount package.
LM27313XMFX/NOPB
LM27313XMFX/NOPB by Texas Instruments is a switching regulator with a small outline, low profile package. It has a max operating temperature of 125°C and can handle input voltages from 2.7V to 14V. This regulator is commonly used in automotive applications for its pulse width modulation control technique and boost configuration.
MC34063AP
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC34063ACD-TR
MC34063ACD-TR by STMicroelectronics is a voltage-mode switching regulator with 1.5A output current, operating at 100kHz frequency. It has a boost configuration and supports input voltages from 3V to 40V, making it ideal for commercial applications requiring efficient power conversion in a compact package.
LM2596S-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS82130SILT
TPS82130SILT by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 3-17V and a compact package style of 2.8mm x 3mm, making it suitable for space-constrained designs.
LM22680MRX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 600 kHz;
TPS54340DDA
TPS54340DDA by Texas Instruments is a switching regulator with max output voltage of 41V, max output current of 3.5A, and max switching frequency of 2500 kHz. Ideal for automotive applications due to its low profile package style and wide input voltage range from 4.5V to 42V.
LM2675MX-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UC2825DW
UC2825DW by Texas Instruments is a current-mode switching controller with a 2A output current and 1000 kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, with a nominal input voltage of 15V and min supply voltage of 9.2V. The package style is small outline, making it suitable for compact designs.
TL494BDR2G
TL494BDR2G by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 125 °C and supports a max output current of 0.5 A at a frequency of 200 kHz. Ideal for automotive applications due to its small outline package style and push-pull switcher configuration.
MC34063ADRJR
MC34063ADRJR by Texas Instruments is a switching regulator with 5V nominal input voltage, 1.25V min output voltage, and 1.5A max output current. It operates in voltage-mode control technique for various applications requiring efficient power conversion in a compact form factor. The IC features a small outline package with surface mount capability and is suitable for commercial temperature grade environments.
LM2841XMK-ADJL/NOPB
LM2841XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.3A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications requiring efficient power management in compact spaces. With a wide input voltage range from 4.5V to 42V, this device is ideal for use in automotive electronics and other industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV890200PDR2G
NCV890200PDR2G by Onsemi is a switching regulator with max output current of 2.7A and max switching frequency of 2kHz. It operates b/w -40 to 105°C, suitable for industrial applications requiring efficient power management in compact spaces. The device features pulse width modulation control mode and buck switcher configuration, making it ideal for various electronic systems.
NCV887001D1R2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV891330PD50R2G
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV891330PD40R2G
NCV890430MW50TXG
NCV890430MW50TXG by Onsemi is a switching regulator with a max output current of 1.9A and a control mode of current-mode PWM. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various applications requiring efficient power management in compact spaces.
NCV887100D1R2G
NCV887100D1R2G by Onsemi is a switching regulator with 1 function and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a max input voltage of 40 V. This IC type is commonly used in automotive applications for boost control.
NCV887801D1R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCV887302D1R2G
NCV887302D1R2G by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125°C) and has a boost switcher configuration. With a max input voltage of 40V, it is suitable for various applications requiring high efficiency and compact design.
NCV890100MWTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCV896530MWATXG
DUAL SWITCHING CONTROLLER; No. of Terminals: 10; Package Code: SON; Package Shape: SQUARE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
NCV8800DW5H
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV8800DW3SR2
NCV81598MWTXG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV81276MNTXG
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV8800DW5HR2
NCV8800DW2H
NCV8800DW7H
NCV8800DW7HR2
NCV81275AMNTXG
NCV81277AMNTXG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved