Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV890131MWTXG by Onsemi is a switching regulator with 1.7A output current, 3.3V nominal output voltage, and 2200 kHz max switching frequency. Ideal for industrial applications requiring efficient power management in a compact form factor.
Median Price
$3.180
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
$2.510
100+ parts
$2.460
1k+ parts
$2.410
10k+ parts
-
Newark
$2.350
$1.680
Element14
$4.890
$3.610
$2.580
$2.370
Digiode
$1.748
Chip Stock
Vyrian
Corphita
$1.656
Corohmni
$1.840
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
iodParts Technologies Inc.
UHIMA Technologies
TANS Electronics
Microchip USA
Kepictronics
This material is lightweight and durable, making the product easy to handle and resistant to damage.
This feature allows for easy installation on circuit boards, saving time and effort during assembly.
Current-mode control provides better stability and response in regulating the output voltage, enhancing overall performance.
This input voltage range allows for compatibility with a wide range of power sources, making the product versatile for different applications.
With a high output current capacity, this product can efficiently power various components in a circuit, ensuring reliable performance.
The pulse width modulation control technique allows for precise regulation of the output voltage, resulting in stable and consistent power delivery.
The buck configuration is efficient in step-down voltage conversion, making this product suitable for applications where reducing voltage is necessary.
Switching Regulators & Controllers NCV890131MWTXG attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV890131MWTXG Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 10/Mar/2021 Mult Dev EOL 30/Jun/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Crimson Semiconductor
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Rochester Electronics
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
LM2596SX-ADJ/NOPB
LM2596SX-ADJ/NOPB by Texas Instruments is a 5-terminal switching regulator with VOLTAGE-MODE control. It operates b/w -40 to 125°C, offering an output range of 3.3V to 37V at a max current of 3A. Ideal for automotive applications due to its compact size and high efficiency at a max switching frequency of 173 kHz.
TPS62175DQCT
TPS62175DQCT by Texas Instruments is a switching regulator with 10 terminals, operating b/w -40 to 85°C. It has a max output current of 0.5A and supports pulse width modulation control technique. Ideal for industrial applications requiring a compact, high-frequency buck switcher with input voltage range of 4.7-28V and output voltage range of 1-6V.
TPS54620RHLR
TPS54620RHLR by Texas Instruments is a 14-terminal switching regulator with a max output current of 6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, has a wide input voltage range from 4.5V to 17V, and is ideal for applications requiring high efficiency power conversion.
TPS62130RGTRF0
TPS62130RGTRF0 by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 85°C. It features a buck switcher configuration, PWM control technique, and can handle input voltages from 3V to 17V. Ideal for industrial applications requiring high efficiency and compact design with a max switching frequency of 2500 kHz.
TPS54060ADRCT
TPS54060ADRCT by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 58V, ideal for automotive applications. It operates b/w -40 to 125°C, uses pulse width modulation control technique, and has a compact square package style.
MP2459GJ-Z
Monolithic Power Systems
MP2459GJ-Z by Monolithic Power Systems is a small outline switching regulator with 1.5A output current, operating at -40 to 125°C. Ideal for automotive applications, it supports a wide input voltage range of 4.5-55V and features pulse width modulation control mode with a max switching frequency of 580kHz.
LM5017MR/NOPB
LM5017MR/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 90V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a compact package style and surface-mount design, it is ideal for space-constrained electronic devices.
UCC28C45DGKRG4
UCC28C45DGKRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 105°C) and is suitable for applications requiring precise pulse width modulation control, such as power supplies and converters.
TL494CDR
TL494CDR by Texas Instruments is a voltage-mode switching controller with a nominal output voltage of 5V and max output current of 0.25A. It operates in push-pull configuration at a max switching frequency of 300kHz, suitable for various commercial applications requiring precise PWM control. The IC's compact small outline package makes it ideal for space-constrained designs.
LM3481MMX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
LM5022MMX/NOPB
LM5022MMX/NOPB by Texas Instruments is a switching controller with current-mode control technique, operating at -40 to 125°C. It offers a wide input voltage range of 6-60V and can handle output voltages up to 300V. Ideal for automotive applications due to its compact size, high switching frequency of 2200 kHz, and buck-boost switcher configuration.
LM2664M6/NOPB
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28C44DR
UCC28C44DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power supply applications. With a small outline package style and surface-mount capability, this BICMOS technology-based IC is ideal for compact designs requiring efficient pulse width modulation control.
TPSM828222SILR
TPSM828222SILR by Texas Instruments is a switching regulator with 2A output current and 1.8V nominal output voltage, suitable for automotive applications. It operates b/w -40 to 125°C, with a max switching frequency of 4000 kHz. This MICROELECTRONIC ASSEMBLY package has a compact size of 2.5mm x 2mm x 1.1mm, making it ideal for space-constrained designs.
TL494BDR2G
TL494BDR2G by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 125 °C and supports a max output current of 0.5 A at a frequency of 200 kHz. Ideal for automotive applications due to its small outline package style and push-pull switcher configuration.
LMZ12003TZX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY; Maximum Switching Frequency: 1000 kHz;
LM25011MY/NOPB
LM25011MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. It is ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
LM27313XMF/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2678S-3.3/NOPB
LM2678S-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 5A, operating temp range of -40 to 125°C, and control mode as voltage-mode. It is ideal for automotive applications due to its compact size, PWM control technique, and wide input voltage range from 8V to 40V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV890200PDR2G
NCV890200PDR2G by Onsemi is a switching regulator with max output current of 2.7A and max switching frequency of 2kHz. It operates b/w -40 to 105°C, suitable for industrial applications requiring efficient power management in compact spaces. The device features pulse width modulation control mode and buck switcher configuration, making it ideal for various electronic systems.
NCV887001D1R2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV891330PD50R2G
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV891330PD40R2G
NCV890430MW50TXG
NCV890430MW50TXG by Onsemi is a switching regulator with a max output current of 1.9A and a control mode of current-mode PWM. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various applications requiring efficient power management in compact spaces.
NCV887100D1R2G
NCV887100D1R2G by Onsemi is a switching regulator with 1 function and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a max input voltage of 40 V. This IC type is commonly used in automotive applications for boost control.
NCV887801D1R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCV887302D1R2G
NCV887302D1R2G by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125°C) and has a boost switcher configuration. With a max input voltage of 40V, it is suitable for various applications requiring high efficiency and compact design.
NCV890100MWTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCV896530MWATXG
DUAL SWITCHING CONTROLLER; No. of Terminals: 10; Package Code: SON; Package Shape: SQUARE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
NCV8800DW5H
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV8800DW3SR2
NCV81598MWTXG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV81276MNTXG
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV8800DW5HR2
NCV8800DW2H
NCV8800DW7H
NCV8800DW7HR2
NCV81275AMNTXG
NCV81277AMNTXG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved