Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV8800SDW33R2G by Onsemi is a switching regulator with 16 terminals, operating temperature range of -40 to 125 °C, and max output current of 2.5A. It is designed for automotive applications, featuring pulse width modulation control technique and buck switcher configuration.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$9.480
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Microchip USA
SupplyDigital Components
Kulean Microsystems
TANS Electronics
UHIMA Technologies
Corohmni
Corphita
Vigor
The use of plastic/epoxy material makes the product lightweight and durable, ideal for various applications.
Being surface mountable makes it easy to integrate into circuit boards, saving space and making assembly more efficient.
Dual terminal positions allow for flexibility in connecting the product within a circuit, accommodating different layouts.
With a high maximum output current, this product is capable of powering devices that require a significant amount of power.
Pulse width modulation control technique helps regulate the output voltage efficiently, providing stable power to connected devices.
The high maximum input voltage allows for compatibility with a wide range of power sources, making it versatile for various applications.
Switching Regulators & Controllers NCV8800SDW33R2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV8800SDW33R2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 09/Jan/2008
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Micropac Industries
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5009MMX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
UCC28C45DGKR
UCC28C45DGKR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this IC is ideal for compact designs requiring efficient pulse width modulation control.
LT1054CS8#PBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54531DDA
TPS54531DDA by Texas Instruments is a switching regulator with 5A max output current, 570kHz max switching frequency, and 85°C max operating temperature. Ideal for industrial applications requiring a compact design and efficient power management in the range of 3.5V to 28V input voltage.
TPS63020DSJR
TPS63020DSJR by Texas Instruments is a switching regulator with 14 terminals, operating b/w -40 to 85°C. It offers a wide input voltage range of 1.8-5.5V and output voltage from 1.2-5.5V, supporting up to 4.5A output current for industrial applications requiring efficient power management in compact spaces at high frequencies up to 2600kHz.
LMZ22005TZX/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Package Equivalence Code: SMSIP7H,.55,50; Peak Reflow Temperature (C): 245; Package Body Material: PLASTIC/EPOXY;
TPS54060ADGQR
TPS54060ADGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 60V. It operates in current-mode control technique, suitable for automotive applications due to its temperature grade and small outline package style. With a buck switcher configuration, it offers pulse width modulation control mode at a high max switching frequency of 2500 kHz.
FAN2001MPX
FAN2001MPX by Onsemi is a switching regulator with 2A output current and 1500kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, in a square package style with 6 terminals for surface mount assembly.
LM2674M-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646IDE#PBF
Analog Devices
LTC3646IDE#PBF by Analog Devices is a current-mode switching regulator with a buck configuration. It operates b/w -40 to 125 °C and supports input voltages from 4V to 40V, providing a stable output of 5V. This small outline IC is ideal for automotive applications due to its high temperature grade and compact design.
TPS82150SILT
TPS82150SILT by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a wide input range of 3-17V, output from 0.9-6V at 1A max current. Ideal for automotive applications due to its compact size and hybrid technology with PWM control.
TPS62040DGQRG4
TPS62040DGQRG4 by Texas Instruments is a switching regulator with a max output current of 2.2A and max output voltage of 6V, ideal for industrial applications. Operating b/w -40 to 85°C, it features voltage-mode control and pulse width modulation technique for efficient power management in compact designs. With a small outline package style and surface-mount capability, it offers flexibility in various electronic systems.
LM2672MX-ADJ/NOPB
LT1054IS8#TRPBF
LT1054IS8#TRPBF by Analog Devices is a small outline switched capacitor regulator with -5V output voltage. It operates b/w -40 to 85°C, has a max switching frequency of 40 kHz, and can handle input voltages from 3.5V to 15V. Ideal for industrial applications requiring efficient power conversion in compact spaces.
LM22672MR-ADJ/NOPB
LM22672MR-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in the automotive temperature grade range (-40 to 125°C) and is suitable for applications requiring a small outline, low profile package style. With pulse width modulation control technique, it offers efficient buck switching configuration at up to 1000kHz frequency.
LM5008ASDX/NOPB
LM5008ASDX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.35A. Operating in temperatures from -40 to 125°C, it's ideal for automotive applications due to its small outline package and wide input voltage range of 6-95V. With a max switching frequency of 600kHz, this device is suitable for various power management needs.
LM2596T-ADJ/LF02
LM2596T-ADJ/LF02 by Texas Instruments is a 5-terminal switching regulator with max output voltage of 37V and max output current of 3A. It operates in voltage-mode control, suitable for automotive applications with input voltage range from 4.5V to 40V. Max operating temp is 125°C, making it ideal for various power supply designs.
LM2841XMK-ADJL/NOPB
LM2841XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.3A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications requiring efficient power management in compact spaces. With a wide input voltage range from 4.5V to 42V, this device is ideal for use in automotive electronics and other industrial applications.
TPS54360BDDAR
TPS54360BDDAR by Texas Instruments is a switching regulator with 3.5A output current, 1V min output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design with small outline package style.
LM2594HVM-5.0
LM2594HVM-5.0 by Texas Instruments is a switching regulator with VOLTAGE-MODE control, offering a 5V output voltage and 0.5A max current. Ideal for automotive applications, it operates b/w -40 to 125°C, with a wide input range of 4.5V to 60V and compact dimensions of 4.9mm x 3.9mm x 1.75mm in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV890200PDR2G
NCV890200PDR2G by Onsemi is a switching regulator with max output current of 2.7A and max switching frequency of 2kHz. It operates b/w -40 to 105°C, suitable for industrial applications requiring efficient power management in compact spaces. The device features pulse width modulation control mode and buck switcher configuration, making it ideal for various electronic systems.
NCV887001D1R2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV891330PD50R2G
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV891330PD40R2G
NCV890430MW50TXG
NCV890430MW50TXG by Onsemi is a switching regulator with a max output current of 1.9A and a control mode of current-mode PWM. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various applications requiring efficient power management in compact spaces.
NCV887100D1R2G
NCV887100D1R2G by Onsemi is a switching regulator with 1 function and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a max input voltage of 40 V. This IC type is commonly used in automotive applications for boost control.
NCV887801D1R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCV887302D1R2G
NCV887302D1R2G by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125°C) and has a boost switcher configuration. With a max input voltage of 40V, it is suitable for various applications requiring high efficiency and compact design.
NCV890100MWTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCV896530MWATXG
DUAL SWITCHING CONTROLLER; No. of Terminals: 10; Package Code: SON; Package Shape: SQUARE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
NCV8800DW5H
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV8800DW3SR2
NCV81598MWTXG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV81276MNTXG
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV8800DW5HR2
NCV8800DW2H
NCV8800DW7H
NCV8800DW7HR2
NCV81275AMNTXG
NCV81277AMNTXG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved