Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV8501D25R2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.15A. It operates in an input voltage range from 3.5V to 26V, making it suitable for various applications requiring stable voltage regulation in automotive electronics and industrial control systems. With AEC-Q100 screening level, this regulator ensures reliable performance even in harsh environments.
Median Price
$1.028
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.991
1k+ parts
$0.823
10k+ parts
$0.733
DigiKey
$1.240
Verical
$0.917
Digiode
$0.772
Chip Stock
Vyrian
Ampacity Inc.
$0.680
Corphita
$0.732
Vigor
$0.780
Corohmni
$0.798
Component Stockers USA
$0.830
AZTECH Wire
$17.230
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Microchip USA
TANS Electronics
SupplyDigital Components
UHIMA Technologies
Problanco Electronics
Continental Prestige Electronics
$0.689
Plastic/epoxy material makes the package lightweight and durable, suitable for various applications.
Low dropout voltage ensures efficient power conversion and minimal power loss.
Surface mount capability allows for easy and efficient PCB assembly.
High maximum operating temperature tolerance ensures reliable performance in different environmental conditions.
Bipolar technology offers stable and precise voltage regulation for consistent output.
Low minimum output voltage provides flexibility in powering various components and devices.
Stable nominal output voltage ensures consistent power supply for connected components.
Small outline package style saves space on the PCB and is ideal for compact designs.
Decent maximum output current capability for powering moderate load devices.
High maximum input voltage tolerance provides flexibility in different power supply scenarios.
Fixed Regulators - Positive Single Output LDO NCV8501D25R2G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCV8501D25R2G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 10/Oct/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Microchip Technology
Frontier Electronics
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Sangdest Microelectronics (Nanjing)
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LM1117IMPX-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
LP2985IM5-3.6/NOPB
LP2985IM5-3.6/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.6V and max output current of 0.15A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise regulation such as portable electronics and battery-powered devices.
LM3940IS-3.3
LM3940IS-3.3 by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 1A. It has a small outline package style, operates b/w -40°C to 125°C, and offers low dropout voltage at 1V for efficient power management in various electronic applications.
LP2950ACDT-5RKG
LP2950ACDT-5RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in compact electronic devices.
TPS73233DBVTG4
TPS73233DBVTG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in an input voltage range of 3.45V to 5.5V, making it suitable for various applications requiring stable power supply within tight voltage tolerances. With a compact package style and surface mount capability, this regulator is ideal for space-constrained electronic devices where low dropout voltage and high efficiency are essential.
LM1117MPX-5.0/NOPB
LM1117MPX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MIC5239-5.0YS-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Terminal Position: DUAL; Maximum Output Current-1: .5 A;
MCP1703T-3302E/DB
MCP1703T-3302E/DB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.25 A and a nominal output voltage of 3.3 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for microcontrollers or sensors.
MCP1703AT-5002E/CB
MCP1703AT-5002E/CB by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
LP2951-50DR
LP2951-50DR by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline package style, operates b/w -40 to 125°C, and offers low dropout voltage of 0.38V for applications requiring stable voltage regulation in compact designs.
LM2940IMP-5.0/NOPB
LM2940IMP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1A. It operates in temperatures ranging from -40°C to 85°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and surface mount capability, it is ideal for space-constrained electronic devices.
LM2940S-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %;
AP2114H-3.3TRG1
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.5 %; Maximum Dropout Voltage-1: .75 V;
MCP1826ST-3302E/DB
MCP1826ST-3302E/DB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 3.3V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
MIC5239-3.3YS-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): SMALL OUTLINE;
REG1117-3.3/2K5
Burr-Brown Corporation
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 1.8 %; Package Body Material: PLASTIC/EPOXY;
TLV1117LV33DCYT
TLV1117LV33DCYT by Texas Instruments is a 3.3 V LDO regulator with 1 A output current, 0.7 V dropout voltage, and 2% voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
LM3940IMPX-3.3/NOPB
LM3940IMPX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 1A. It has a small outline package style, operates b/w -40 to 125°C, and offers low dropout voltage at 1V for efficient power management in various electronic applications.
NCP5501DT50RKG
NCP5501DT50RKG by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, suitable for applications requiring stable voltage regulation in compact spaces. The package style is small outline with a matte tin terminal finish, making it ideal for surface mount designs.
LT1963EST-3.3#PBF
Linear Technology
LT1963EST-3.3#PBF by Linear Technology is a fixed positive single output LDO regulator with a max output current of 1.5 A and a dropout voltage of 0.55 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery-powered devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV8664ST50T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
NCV8187AMT330TAG
Onsemi's NCV8187AMT330TAG is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 1.2A max output current, and 0.22V max dropout voltage. Ideal for automotive applications due to AEC-Q100 screening level and operating temperature range of -40°C to 150°C.
NCV8177BMX330TCG
NCV8177BMX330TCG by Onsemi is a fixed positive single output LDO regulator with a max dropout voltage of 0.19V and an operating temperature range of -40°C to 125°C. It is commonly used in applications requiring a regulated output voltage of 3.3V, such as automotive electronics or portable devices.
NCV8165ML330TCG
NCV8165ML330TCG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in an input voltage range of 4.3V to 5.5V, making it suitable for various applications requiring stable voltage regulation in automotive electronics and industrial control systems. With AEC-Q100 screening level, this regulator ensures reliable performance even in harsh environments at temperatures ranging from -40°C to 125°C.
NCV8705MT33TCG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCV86603BDT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Length: 6.54 mm; Maximum Time At Peak Reflow Temperature (s): 30;
NCV8674DS120G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Min): -40 Cel;
NCV8664CST33T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
NCV8187AMLE330TCG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NCV8675DS50R4G
NCV8675DS50R4G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.2A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With a compact rectangular package style and surface mount capability, this regulator offers precise voltage control with minimal dropout voltage for efficient power management.
NCV8675DT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Package Shape: RECTANGULAR; Minimum Input Voltage: 4.5 V;
NCV8161ASN330T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Peak Reflow Temperature (C): 260;
NCV8603SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;
NCV8161ASN180T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Terminal Finish: MATTE TIN;
NCV8165ML330TBG
NCV8165ML330TBG by Onsemi is a Fixed Positive Single Output LDO Regulator with a nominal output voltage of 3.3V and max output current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly in tight layouts.
NCV8711ASN500T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 22 V; Maximum Voltage Tolerance: 2 %;
NCV8675DT33RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Peak Reflow Temperature (C): 260; Package Body Material: PLASTIC/EPOXY;
NCV8675DS33R4G
NCV8675DS33R4G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With a compact package style and AEC-Q100 screening level, this regulator offers precise performance for automotive electronics.
NCV8675DS50G
NCV8675DS50G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV8537MN330R2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 1.5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved