Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV20062DMR2G by Onsemi is an operational amplifier with a max input offset voltage of 4000 uV and nominal voltage of 3.3 V, suitable for automotive applications. It features a nominal common mode reject ratio of 76 dB and a unity gain bandwidth of 3000 kHz, making it ideal for precision signal processing in automotive electronics. With AEC-Q100 screening level and dual terminal position, this CMOS technology-based op amp offers reliable performance in harsh environments.
Median Price
$0.390
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.990
100+ parts
$0.542
1k+ parts
$0.458
10k+ parts
$0.406
Arrow
-
$0.373
Verical
$0.335
Avnet
DigiKey
$0.408
Nova Conductors
$0.454
Digiode
$0.893
Chip Stock
Cyclops Electronics Ltd
NAC Semi
$0.920
Vyrian
Netsource Technology, Inc.
Flip Electronics
Ampacity Inc.
$0.800
Vigor
Corphita
$0.846
Corohmni
$0.940
Microchip USA
$2.749
Advanced Electronics
$3.738
$3.402
$3.065
Infinite Electronics LLP (Excess)
A-Z Elektronik GmbH
Lixinc
RC Electronics
Kulean Microsystems
TANS Electronics
Kepictronics
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Perfect Parts
Netroflash
$0.445
$0.432
$0.423
This material provides good insulation and protection for the components inside the package, ensuring durability and reliable performance.
Low input offset voltage helps in minimizing errors in the output signal, making this op amp suitable for precision applications.
Surface mount capability allows for easy and compact integration onto PCBs, saving space and simplifying assembly processes.
High common mode rejection ratio helps in eliminating unwanted signals, resulting in cleaner output signals and improved overall performance.
Low supply voltage requirement allows for compatibility with a wide range of systems, making this op amp versatile and energy-efficient.
Wide operating temperature range enables this op amp to function reliably in various environmental conditions, making it suitable for automotive applications.
High unity gain bandwidth indicates the speed at which this op amp can operate, making it ideal for high-frequency signal processing applications.
CMOS technology provides low power consumption and high noise immunity, enhancing the performance and efficiency of this op amp.
Being an operational amplifier, this product is designed for amplifying and processing signals with high precision, making it suitable for a wide range of signal conditioning applications.
Operational Amplifiers (Op Amps) NCV20062DMR2G attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Technology:
Total Functions:
Sub-Category:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Nominal Slew Rate:
Peak Bias Current:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Screening Level:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style:
NCV20062DMR2G Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - Case Outline Rev 07/Aug/2020
PCN Assembly/Origin - Backgrind Site Change 16/Oct/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
Baneasa S A
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
NXP Semiconductors
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM741CMWC
OPERATIONAL AMPLIFIER; Terminal Form: NO LEAD; Package Code: DIE; Package Shape: UNSPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Surface Mount: YES;
OPA551UAE4
OPA551UAE4 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 3000 uV, common mode reject ratio of 102 dB, and unity gain bandwidth of 3000 kHz. Ideal for automotive applications due to its low-bias current, wide supply voltage range, and compact small outline package.
LM741J
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2192IDR
OPA2192IDR by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It offers a max input offset voltage of 25uV, nominal common mode reject ratio of 120dB, and nominal unity gain bandwidth of 10MHz. Ideal for automotive applications due to its temperature grade and small outline package style.
OPA827AIDR
OPA827AIDR by Texas Instruments is an Operational Amplifier with low offset voltage of 150uV, high common mode rejection ratio of 114dB, and fast slew rate of 20V/us. Ideal for automotive applications due to its low bias current, wide supply voltage range, and compact package size.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
INA148UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LMP8645HVMKE/NOPB
LMP8645HVMKE/NOPB by Texas Instruments is a micropower operational amplifier with 1000uV max input offset voltage, 22uA max average bias current, and 95dB nominal CMRR. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C.
INA132UA/2K5E4
Texas Instruments' INA132UA/2K5E4 is an Operational Amplifier with 250uV Max Input Offset Voltage, 90dB CMRR, and -40 to 85°C Operating Temp. Ideal for applications requiring low-offset precision amplification in compact designs due to its small outline package and voltage-feedback architecture.
LM358H/NOPB
LM358H/NOPB by Texas Instruments is a voltage-feedback operational amplifier with a max input offset voltage of 9000 uV, nominal common mode reject ratio of 85 dB, and min voltage gain of 15000. It is commonly used in applications requiring amplification and signal conditioning.
AD8676BRMZ
Analog Devices
AD8676BRMZ by Analog Devices is an Operational Amplifier with 160uV Max Input Offset Voltage, 4500uA Max Average Bias Current, and 130dB Nominal CMRR. Ideal for automotive applications due to its low-offset, high gain bandwidth of 10MHz, and voltage-feedback architecture.
LM7322MMX/NOPB
LM7322MMX/NOPB by Texas Instruments is a dual operational amplifier with 6000uV max input offset voltage and 1.5uA max average bias current. Ideal for automotive applications, it operates at -40 to 125 °C, has a unity gain bandwidth of 16000 kHz, and requires +-1.25/+-16/2.5/32 V power supplies.
OPA2211AIDDAR
OPA2211AIDDAR by Texas Instruments is a dual operational amplifier with low offset voltage of 150uV and bias current of 0.25uA. It operates at a wide temperature range from -40 to 125°C, making it suitable for automotive applications. With a unity gain bandwidth of 45MHz, this op amp is ideal for precision signal conditioning in various electronic systems.
LM741CH
LM741CH by Texas Instruments is an Operational Amplifier with 6000uV Max Input Offset Voltage, 90dB Nominal CMRR, and 437kHz Unity Gain Bandwidth. Ideal for applications requiring precise signal amplification in commercial-grade environments at temperatures ranging from 0 to 70°C.
LM258DR2
LM258DR2 by Onsemi is a dual operational amplifier with 85dB CMRR and 25000 min voltage gain. It operates at -25 to 85 °C, with max supply voltage of +-30V. Ideal for applications requiring high precision amplification in compact designs.
LM324NE3
LM324NE3 by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 9000 uV and a nominal voltage of 5 V. Ideal for applications requiring low-bias current, it operates at temperatures ranging from 0 to 70 °C.
OPA2376AIDRG4
OPA2376AIDRG4 by Texas Instruments is an Operational Amplifier with low-offset voltage of 25uV, low-bias current of 0.00001uA, and high common mode rejection ratio of 90dB. Ideal for automotive applications due to its CMOS technology, VOLTAGE-FEEDBACK architecture, and compact size in a small outline package.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
AD8606ARMZ-R7
AD8606ARMZ-R7 by Analog Devices is an Operational Amplifier with 750uV Max Input Offset Voltage, 90dB CMRR, and 110000 Min Voltage Gain. Ideal for automotive applications due to its low-offset and low-bias features. Package style: Small Outline, Thin Profile, Shrink Pitch.
INA260AIPW
Texas Instruments' INA260AIPW is an operational amplifier with 16 terminals and a supply voltage of 3.3V, suitable for automotive applications. It offers a max input offset voltage of 5uV, common mode voltage of 36V, and unity gain bandwidth of 3.5kHz. With a compact rectangular package style and surface mount capability, it ensures high performance in tight spaces at temperatures ranging from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV2904DR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV21871SQ3T2G
NCV21871SQ3T2G by Onsemi is an Op Amp with 45uV Max Input Offset Voltage, 111dB CMRR, and 1.8V Nominal Voltage. Ideal for automotive applications due to AEC-Q100 screening level and micropower technology.
NCV20071SN2T1G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCV20072DR2G
NCV2902DR2G
NCV2902DR2G by Onsemi is a micropower operational amplifier with 4 functions. It has a max input offset voltage of 7000 uV and operates at temperatures ranging from -40 to 125 °C. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
NCV2904DMR2G
NCV2904DMR2G by Onsemi is an operational amplifier with a max input offset voltage of 7000 uV and a nominal voltage of 5 V. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and AEC-Q100 screening level. With a package style of SMALL OUTLINE, THIN PROFILE, SHRINK PITCH, it offers high performance in compact designs.
NCV2001SN2T1G
NCV21871SN2T1G
NCV21871SN2T1G by Onsemi is a CMOS operational amplifier with low-offset and low-bias features. It offers a max input offset voltage of 45uV, nominal voltage of 1.8V, and nominal unity gain bandwidth of 350kHz. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
NCV20166SN2T1G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR;
NCV21911SN2T1G
NCV21911SN2T1G by Onsemi is an operational amplifier with a max input offset voltage of 25uV and low bias current of 0.0035uA. It is designed for automotive applications, featuring AEC-Q100 screening and a small outline package style. With micropower technology and high common mode rejection ratio, it operates efficiently in a wide temperature range from -40 to 125°C.
NCV21912DR2G
NCV21912DR2G by Onsemi is an Operational Amplifier with low-offset voltage of 25uV and micropower consumption of 1.14mA. Ideal for automotive applications due to AEC-Q100 screening level, it offers high common mode rejection ratio of 130dB and operates in a wide temperature range from -40 to 125°C.
NCV20061SQ3T2G
NCV20061SQ3T2G by Onsemi is a CMOS operational amplifier with a max input offset voltage of 4000 uV. It has a nominal unity gain bandwidth of 3000 kHz and operates at temperatures ranging from -40 to 125 °C. This amplifier is commonly used in automotive applications due to its AEC-Q100 screening level.
NCV20074DTBR2G
NCV20074DTBR2G by Onsemi is a CMOS operational amplifier with 4 functions, 125 dB CMRR, and 3200 kHz unity gain bandwidth. Ideal for automotive applications due to AEC-Q100 screening level, it operates b/w -40 to 125 °C with a supply voltage of 5V. This small outline op amp has a max input offset voltage of 4000 uV and low bias current of 0.0015 uA.
NCV272DMR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
NCV20074DR2G
NCV20074DR2G by Onsemi is an Operational Amplifier with 4 functions, 125 dB CMRR, and 3200 kHz unity gain bandwidth. It is ideal for automotive applications due to AEC-Q100 screening level and operates b/w -40 to 125 °C temperature range.
NCV20032DR2G
NCV20062DR2G
NCV20062DTBR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCV2002SN1T1G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved