Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV1117ST15T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and dropout voltage of 1.07V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
Median Price
$0.323
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.390
Rochester
$0.268
$0.239
Verical
$0.298
DigiKey
$0.270
Flip Electronics (Authorized)
Mouser Electronics
$0.349
Flip Electronics
$0.250
Vyrian
Digiode
$0.387
Chip Stock
Corohmni
Corphita
$0.366
Vigor
$0.710
Kepictronics
Metaverse IC Inc.
Perfect Parts
Continental Prestige Electronics
$0.320
QUARKTWIN TECHNOLOGY LTD
Lixinc
Authorized Procurement Solutions
SupplyDigital Components
A-Z Elektronik GmbH
GreenTree Electronics
Kulean Microsystems
Problanco Electronics
TANS Electronics
Microchip USA
UHIMA Technologies
The use of plastic/epoxy material makes the product lightweight and durable, ideal for applications where weight and durability are important factors.
Low dropout voltage ensures efficient power conversion with minimal energy loss, making the product efficient and suitable for power-sensitive applications.
High maximum operating temperature allows the product to withstand harsh environmental conditions, making it reliable for a wide range of applications.
Bipolar technology ensures stable and reliable operation of the regulator, offering consistent output voltage for a variety of loads.
The precise nominal output voltage makes the product suitable for powering sensitive electronic components that require a specific voltage level for optimal performance.
High maximum output current capability makes the product suitable for powering a wide range of devices, providing flexibility in application use.
Fixed Regulators - Positive Single Output LDO NCV1117ST15T3G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCV1117ST15T3G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
PCN Assembly/Origin - Cancellation 11/Jan/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Telcom Semiconductor
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Jinan Jingheng Electronics
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TPS71733DCKRG4
Texas Instruments
TPS71733DCKRG4 by Texas Instruments is a BICMOS technology LDO regulator with 3.3V output voltage, 0.15A max current, and 0.3V dropout voltage. Ideal for applications requiring stable power supply in compact designs with operating temperatures from -40 to 125°C.
MCP1703T-3302E/MB
Microchip Technology
MCP1703T-3302E/MB by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with minimal footprint.
LT1761ES5-5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
MIC5233-5.0YM5-TR
MIC5233-5.0YM5-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 2% Max Voltage Tolerance. Ideal for applications requiring stable voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
TPS7A2033PDBVR
TPS7A2033PDBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It has a small outline, low profile package style with matte tin terminal finish, making it suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
LT1121CST-5#PBF
Analog Devices
LT1121CST-5#PBF by Analog Devices is a fixed positive single output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.7V and can handle up to 0.15A output current. Ideal for applications requiring stable voltage regulation in compact spaces.
PTPS7A2633DRVR
PTPS7A2633DRVR by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.5 A and a nominal output voltage of 3.3 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
LM2937ESX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 4.8 %;
MIC29300-5.0WU-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; No. of Functions: 1; Peak Reflow Temperature (C): 260;
LP2985AIM5-3.3
LP2985AIM5-3.3 by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 0.15A max output current, and 16V max input voltage. Ideal for applications requiring low dropout voltage and precise regulation in compact designs like portable electronics and IoT devices.
LT1764AEQ-1.5#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.53 %;
LT1761ES5-5#TRPBF
LT1764AEQ-3.3#TRPBF
LT1764AEQ-3.3#TRPBF by Analog Devices is a 3.3V Fixed Positive Single Output LDO Regulator with 3A max output current, 0.66V dropout voltage, and 125°C max operating temperature. Ideal for applications requiring stable voltage regulation in compact spaces like consumer electronics and industrial control systems.
LM2931ADT-5.0RKG
LM2931ADT-5.0RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCV4275ADT50RKG
Onsemi's NCV4275ADT50RKG is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.45A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
LP2950CDT-3.3/NOPB
LP2950CDT-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LP2985-50DBVR
LP2985-50DBVR by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style suitable for surface mount applications. With a max dropout voltage of 0.575V, it operates in temperatures ranging from -40 to 125°C, making it ideal for various electronic devices requiring stable power supply.
LT3032EDE#TRPBF
Analog Devices' LT3032EDE#TRPBF is a fixed positive single output LDO regulator with a max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in need of stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs requiring efficient heat dissipation.
LM2940SX-5.0/NOPB
LM2940SX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable 5V power supply such as embedded systems and IoT devices.
MIC37100-3.3WS-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Time At Peak Reflow Temperature (s): 40;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV1117ST33T3G
NCV1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
NCV1117ST50T3G
Onsemi's NCV1117ST50T3G is a fixed positive single output LDO regulator with 1A max output current and 5V nominal output voltage. It has a max dropout voltage of 1.2V, making it suitable for applications requiring stable voltage regulation in automotive electronics or industrial systems. With AEC-Q100 screening level and operating temperature range from -55°C to 150°C, this bipolar technology-based regulator offers precise performance in harsh environments.
NCV1117DT33T5G
NCV1117DT33T5G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in automotive electronics and industrial control systems. With a compact package style and excellent line and load regulation, this device ensures reliable performance in challenging environments.
NCV1117ST18T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
NCV1117DT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCV1117ST12T3G
NCV1117ST12T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 12V and max output current of 1A. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation. With a compact package style and surface mount capability, it offers precise voltage control with low dropout voltage for efficient power management.
NCV1117DT33T4G
NCV1117ST12T3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCV1117DT25RK
NCV1117DT15RK
NCV1117DT18T5
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
NCV1117DT25RKG
NCV1117DT20RKG
NCV1117ST15T3
NCV1117DT18RKG
NCV1117DT18T5G
NCV1117DT33T5
NCV1117DT12RKG
NCV1117DT15RKG
NCV1117DT15RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 1.5V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved