Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP160AMX250TBG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.25A. It operates in an input voltage range of 3.5V to 5.5V, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with very thin profile, ideal for space-constrained designs that require efficient heat dissipation.
Median Price
$0.093
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.077
10k+ parts
$0.069
DigiKey
$0.120
Verical
$0.086
Flip Electronics (Authorized)
Digiode
$0.076
Flip Electronics
Chip Stock
Vyrian
Corphita
$0.072
Corohmni
$0.078
AZTECH Wire
$14.210
Continental Prestige Electronics
$0.401
Perfect Parts
RC Electronics
Kulean Microsystems
SupplyDigital Components
Microchip USA
A-Z Elektronik GmbH
TANS Electronics
Kepictronics
Authorized Procurement Solutions
GreenTree Electronics
Problanco Electronics
UHIMA Technologies
The use of plastic/epoxy material makes the product lightweight and durable, suitable for portable devices.
Low dropout voltage ensures efficient power regulation and minimal power loss, making it ideal for battery-operated devices.
Surface mount capability allows for easy and compact installation on PCBs, saving space and reducing assembly time.
Wide operating temperature range enables the regulator to function reliably in various environmental conditions.
Square package shape facilitates easy integration into circuit layouts and offers a symmetrical design.
Lead-free terminals are environmentally friendly and comply with RoHS regulations, ensuring a more sustainable product.
The regulator can operate efficiently in cold temperatures, making it suitable for applications in harsh climates.
TR packaging method provides tape and reel packaging for automated assembly, enhancing production efficiency.
Minimum output voltage of 2.45V ensures a stable power supply for low-voltage components, preventing under-voltage issues.
Tight voltage tolerance of 2% ensures accurate voltage regulation, leading to reliable performance of connected devices.
Stable nominal output voltage of 2.5V meets standard voltage requirements for various electronic applications.
Four terminals provide secure connections and ensure stable electrical contact, enhancing the regulator's overall reliability.
Small outline, heat sink/slug, and very thin profile package style offers efficient heat dissipation and compact design for space-constrained applications.
Fixed output voltage eliminates the need for external adjustments, simplifying the design and reducing component count.
Close terminal pitch of 0.65mm enables a compact layout on the PCB, saving space and enhancing the overall design aesthetics.
Being a fixed positive single output LDO regulator, it provides stable and low-noise power supply for sensitive components, ensuring reliable operation.
Terminal finish of nickel/gold/palladium offers excellent conductivity, corrosion resistance, and solderability for reliable connections.
Dual terminal position provides redundancy in case of a single terminal failure, enhancing the product's reliability and robustness.
Maximum output voltage of 2.55V ensures compatibility with various voltage requirements of electronic components, increasing the regulator's versatility.
Low seated height of 0.43mm allows for a slim and compact profile, suitable for thin devices and applications with space constraints.
Narrow width of 1mm allows for a compact footprint on the PCB, maximizing space utilization and enabling dense PCB designs.
Minimum input voltage of 3.5V ensures proper regulation even under low voltage conditions, making it suitable for a wide range of power sources.
High maximum output current of 0.25A provides sufficient power for various components, making it versatile for different electronic applications.
Low nominal dropout voltage of 0.11V minimizes power loss and heat dissipation, ensuring efficient energy conversion and prolonged service life.
Short length of 1mm contributes to the compact package size, making it suitable for space-constrained applications.
The regulator can handle a maximum input voltage of 5.5V, providing protection against voltage spikes and ensuring safe operation under varying input conditions.
With a maximum absolute input voltage of 6V, the regulator offers additional protection against voltage transients, enhancing system robustness.
Fixed Regulators - Positive Single Output LDO NCP160AMX250TBG attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP160AMX250TBG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
PCN Assembly/Origin - Bond Wire 20/Aug/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1552200168
Molex
WIRE AND CABLE;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Alpha & Omega Semiconductor
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
SPX3819M5-L-5.0/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Package Style (Meter): SMALL OUTLINE, LOW PROFILE, SHRINK PITCH;
TC1262-3.3VDBTR
Microchip Technology
TC1262-3.3VDBTR by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 0.5 A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LP2950CDT3.3
Motorola
Motorola LP2950CDT3.3 is a 3-terminal LDO regulator with fixed positive output. It offers max line regulation of 0.0066% and load regulation of 0.0066%. Suitable for applications requiring stable voltage supply in compact surface-mount designs.
LD1117S12TR
STMicroelectronics
LD1117S12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LM1086ISX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 27 V; Maximum Voltage Tolerance: 2 %;
TPS73233DBVR
TPS73233DBVR by Texas Instruments is a 3.3V fixed positive single output LDO regulator with max dropout voltage of 0.15V and max output current of 0.25A. It is ideal for applications requiring stable voltage supply in compact designs, such as portable electronics and IoT devices.
LM2940CT-5.0/NOPB
LM2940CT-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It has a max dropout voltage of 1V, making it suitable for applications requiring stable power supply in the temperature range of 0 to 125°C. With its through-hole terminal form and compact dimensions (14.986mm x 10.16mm x 4.7mm), this regulator is ideal for various electronic devices and circuits where space-saving and efficient power management are crucial.
MCP1703T-3302E/MB
MCP1703T-3302E/MB by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with minimal footprint.
MIC5233-5.0YM5-TR
MIC5233-5.0YM5-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 2% Max Voltage Tolerance. Ideal for applications requiring stable voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
LP2985AIM5-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LP2950CDT-3.3
LP2950CDT-3.3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2.4% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, such as consumer electronics and industrial control systems.
LM2936HVBMA-3.3
LM2936HVBMA-3.3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.05A. It has a small outline package style, operates b/w -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise voltage regulation.
LP2951-50QDRQ1
LP2951-50QDRQ1 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It features a small outline package, Gull Wing terminal form, and operates at temperatures up to 150°C. Ideal for automotive applications requiring stable voltage regulation in compact designs.
LM2931Z-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Minimum Input Voltage: 6 V;
TLV1117-33CDCYR
TLV1117-33CDCYR by Texas Instruments is a fixed positive LDO regulator with 3.3V output voltage, 0.8A max current, and 1.2V dropout voltage. It is ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability at temperatures ranging from 0 to 125°C.
LP2992IM5-1.8/NOPB
LP2992IM5-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125 °C and is suitable for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LT1764AEQ-1.8#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
TPS7A1633DGNT
TPS7A1633DGNT by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2% max voltage tolerance. It operates in temperatures ranging from -40 to 125°C and is suitable for various applications requiring stable low-dropout voltage regulation.
SPX1117M3-L-3.3/TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Input Voltage: 10 V;
MC33275DT-3.0G
MC33275DT-3.0G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.3A and a dropout voltage of 0.5V. It is commonly used in applications that require stable voltage regulation, such as power supplies and battery-powered devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1117ST33T3G
NCP1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
NCP1117ST50T3G
NCP1117ST50T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact small outline package.
NCP1117DT33G
NCP1117DT33G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, such as consumer electronics and industrial control systems.
NCP1117LPST33T3G
NCP1117LPST33T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33RKG
NCP1117DT33RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33T5G
NCP1117DT33T5G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments such as portable electronic devices. The regulator operates within a wide temperature range from -55°C to 150°C, ensuring reliable performance in various operating conditions.
NCP115ASN330T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP114ASN330T1G
NCP114ASN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with surface mount capability for easy integration into electronic devices.
NCP1117DT15RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
NCP1117DT18G
NCP1117DT18G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 1.8V and can operate in temperatures ranging from -55°C to 150°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP1117DT50RKG
NCP1117ST15T3G
NCP1117ST15T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 1.5V nominal output voltage, and 2% max voltage tolerance. It is used in applications requiring stable voltage regulation in a compact small outline package for temperatures ranging from -55 to 150°C.
NCP161ASN330T1G
NCP1117DT50G
NCP1117DT50G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.
NCP163ASN330T1G
NCP163ASN330T1G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.
NCP1117DT12RKG
NCP1117DT12RKG by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 12V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP1117DT18RKG
NCP1117DT18RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 1.8V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP1117DT25RKG
NCP1117DT25RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 2.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
NCP164CSN330T1G
NCP164CSN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in an input voltage range of 3.8V to 5V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline and thin profile package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved