Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1117DT18RK by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 1.8V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
Median Price
$0.229
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.238
1k+ parts
$0.197
10k+ parts
$0.176
Verical
$0.220
Digiode
$0.185
Vyrian
LWI Electronics Inc
Odi Ramu Company
Corphita
Vigor
$0.190
Corohmni
$0.192
Component Stockers USA
$0.200
$0.170
AZTECH Wire
$13.740
Assy Fe
SupplyDigital Components
RC Electronics
TANS Electronics
Problanco Electronics
Continental Prestige Electronics
$0.165
Kepictronics
Kulean Microsystems
Microchip USA
UHIMA Technologies
This material offers good durability and insulation, making the product suitable for various environments.
Low dropout voltage ensures efficient power conversion without significant loss, making it ideal for applications requiring tight voltage regulation.
Surface mount capability allows for easy and convenient installation on circuit boards, saving space and reducing assembly time.
Wide operating temperature range enables the regulator to function effectively in extreme conditions, increasing its versatility.
Bipolar technology offers high precision and stability, ensuring consistent performance over a range of operating conditions.
Gull wing terminals provide strong mechanical connections and facilitate easy soldering during assembly, improving overall reliability.
With a low minimum operating temperature, the regulator can function in harsh cold environments without compromising performance.
The minimum output voltage ensures compatibility with low voltage applications, making the product suitable for a wide range of devices.
Tight voltage tolerance ensures accurate output regulation, making the regulator reliable in maintaining stable power supply.
The nominal output voltage provides a consistent reference point for the regulator, ensuring precise voltage control for connected devices.
Having only two terminals simplifies installation and reduces chances of error, making the product user-friendly and easy to integrate.
Small outline packaging offers space-saving benefits, making the regulator suitable for compact electronic devices or applications with limited board space.
Fixed output voltage eliminates the need for manual adjustments and ensures consistent performance without the risk of tampering, making it ideal for plug-and-play designs.
The terminal pitch enables easy mounting on standard PCB layouts, simplifying the assembly process and ensuring compatibility with industry-standard designs.
With minimal line regulation, the regulator maintains stable output voltage even with fluctuations in input voltage, ensuring reliable operation in changing conditions.
This type of regulator offers simplicity and efficiency in providing a stable output voltage, making it suitable for applications requiring a constant power supply.
Tin lead terminals offer good solderability and conductivity, ensuring strong connections that resist corrosion and maintain consistent electrical performance.
Single terminal position simplifies installation and reduces chances of error, making the product user-friendly and easy to integrate into circuit designs.
The maximum output voltage allows flexibility in powering various devices while still maintaining tight voltage regulation, enhancing the product's versatility.
Low seated height offers space-saving benefits, making the regulator suitable for slim and compact applications where board space is limited.
Compact width dimensions make the regulator suitable for applications with space constraints, allowing for easy integration into various electronic devices.
Minimal load regulation ensures consistent output voltage under varying load conditions, making the regulator reliable in powering diverse loads without voltage fluctuations.
The minimum input voltage requirement ensures compatibility with a wide range of power sources, making the regulator versatile in different operating environments.
The maximum output current capability allows the regulator to power devices with higher current demands, making it suitable for applications requiring stable power delivery.
High peak reflow temperature tolerance allows for reliable soldering during manufacturing processes, ensuring strong and durable connections for consistent electrical performance.
Low dropout voltage ensures efficient power conversion without significant loss, making the product ideal for energy-sensitive applications where power efficiency is crucial.
Compact length dimensions make the regulator suitable for space-restricted applications, allowing for easy integration and installation in a variety of electronic devices.
Having a higher maximum input voltage tolerance enables the regulator to handle a wider range of power sources, making it versatile and suitable for diverse applications.
With a high absolute maximum input voltage, the regulator offers robust protection against voltage surges or variations, ensuring reliable operation in demanding environments.
Fixed Regulators - Positive Single Output LDO NCP1117DT18RK attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
NCP1117DT18RK Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 03/Jan/2008
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM358AN
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Signetics
Sensitron Semiconductor
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Fairchild Semiconductor
LM2931T-5.0G
LM2931T-5.0G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.1A max output current, and 6V min input voltage. It has a max dropout voltage of 0.6V and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in electronic circuits.
TLV70233DBVT
TLV70233DBVT by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.375V max dropout voltage, and 0.3A max output current. It is ideal for applications requiring low power consumption in compact electronic devices due to its small outline package style and wide operating temperature range from -40°C to 125°C.
LP2992AIM5-3.3/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4.5 %;
LT1763CS8-2.5#TRPBF
Analog Devices
Analog Devices' LT1763CS8-2.5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an input voltage range of 1.8V to 20V. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1117CST-3.3#PBF
Analog Devices' LT1117CST-3.3#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 1.2V, suitable for applications requiring stable power supply in compact spaces. Operating temperature ranges from 0 to 125°C, making it ideal for various electronic devices needing efficient regulation with low dropout voltage. This surface-mount device features a small outline package style and matte tin terminal finish, ensuring reliable performance in limited space environments.
MIC2920A-3.3WS-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 2.5 %;
LM2936HVMA-5.0
LM2936HVMA-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage supply in a compact package. It operates within a wide temperature range from -40°C to 150°C, making it ideal for various electronic devices where precise voltage regulation is crucial.
TPS7A4533DCQR
TPS7A4533DCQR by Texas Instruments is a fixed positive single output LDO regulator with 1.5A max output current, 3.3V nominal output voltage, and 0.45V max dropout voltage. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package and high load regulation performance.
PTLV75733PDRVR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
LT3010EMS8E-5
Analog Devices' LT3010EMS8E-5 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. This surface-mount device in a small outline package is ideal for applications requiring stable voltage regulation in tight spaces, such as portable electronics or IoT devices.
LP2950ACDT-5.0G
LP2950ACDT-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount designs where space is limited.
LM1117IMPX-5.0/NOPB
LM1117IMPX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
LP38692MP-3.3/NOPB
Texas Instruments LP38692MP-3.3/NOPB is a 1A fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
MAX8878EZK28-T
Maxim Integrated
MAX8878EZK28-T by Maxim Integrated is a fixed positive single output LDO regulator with 2.8V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style and operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM2940IMP-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %;
MCP1702T-5002E/MB
Microchip Technology
MCP1702T-5002E/MB by Microchip Technology is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
TPS71533DCKRG4
TPS71533DCKRG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.05A. It features a small outline package style, PMOS technology, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
SPX1117M3-L-3.3/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Input Voltage: 10 V;
REG1117-3.3TR
The Texas Instruments REG1117-3.3TR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with Gull Wing terminals, ideal for surface mount assembly in space-constrained designs.
TPS76833QPWPREP
TPS76833QPWPREP by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for efficient integration into space-constrained designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1117ST33T3G
NCP1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
NCP1117ST50T3G
NCP1117ST50T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact small outline package.
NCP1117DT33G
NCP1117DT33G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, such as consumer electronics and industrial control systems.
NCP1117LPST33T3G
NCP1117LPST33T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33RKG
NCP1117DT33RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33T5G
NCP1117DT33T5G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments such as portable electronic devices. The regulator operates within a wide temperature range from -55°C to 150°C, ensuring reliable performance in various operating conditions.
NCP115ASN330T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP114ASN330T1G
NCP114ASN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with surface mount capability for easy integration into electronic devices.
NCP1117DT15RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
NCP1117DT18G
NCP1117DT18G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 1.8V and can operate in temperatures ranging from -55°C to 150°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP1117DT50RKG
NCP1117ST15T3G
NCP1117ST15T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 1.5V nominal output voltage, and 2% max voltage tolerance. It is used in applications requiring stable voltage regulation in a compact small outline package for temperatures ranging from -55 to 150°C.
NCP161ASN330T1G
NCP1117DT50G
NCP1117DT50G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.
NCP163ASN330T1G
NCP163ASN330T1G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.
NCP1117DT12RKG
NCP1117DT12RKG by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 12V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP1117DT18RKG
NCP1117DT18RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 1.8V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP1117DT25RKG
NCP1117DT25RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 2.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
NCP164CSN330T1G
NCP164CSN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in an input voltage range of 3.8V to 5V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline and thin profile package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved