Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' ADP3338AKCZ-3.3RL7 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
Median Price
$3.700
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$1.760
1k+ parts
-
10k+ parts
DigiKey
$3.960
$2.483
$2.356
Mouser Electronics
$3.980
$2.490
$2.350
Newark
$4.480
$3.580
$2.470
Verical
$303.080
Arrow
$1.686
Element14
$3.450
$3.290
Analog Devices Inc
$1.530
Farnell
$1.960
$1.640
Nova Conductors
$2.480
Digiode
$2.774
Maritex
$7.370
$5.616
$4.606
Component Electronics Inc.
$10.000
$7.500
$6.500
Chip Stock
Vyrian
Martec Srl
VNN
Sunrise Surplus Inc.
ACDS - Activité Composants Distribution Service
Bristol Electronics
Cogito LLC
Beltway Electronics Company
Holdelec - ElecDif-Pro
Prism Electronics
Component Sense
Ampacity Inc.
$1.130
Semicontronic
$1.102
$1.096
Corohmni
$1.860
Advanced Electronics
$1.916
$1.820
Argo Parts USA
$2.285
Parana Technologies
$2.301
$2.140
Modulus Dynamics
$2.348
$2.324
$2.254
Aranea Global
$2.430
$2.333
IDEA Electronic Components Group
$2.474
Corphita
$2.628
Aztec Data Supply Inc.
$3.068
Vigor
$3.200
Continental Prestige Electronics
$3.330
$2.450
$1.670
DigiPath Technology Company
$3.859
$3.705
A-Z Elektronik GmbH
RC Electronics
$2.160
$1.970
$1.910
Perfect Parts
Lixinc
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
Robosynatics
$1.823
$1.786
Lucentia Tech
Futuretech Components
S.R.D Solutions
iodParts Technologies Inc.
$2.378
The use of plastic/epoxy material makes the package lightweight and durable, making it suitable for a wide range of applications.
With a low maximum dropout voltage, this LDO regulator can maintain a stable output voltage even when the input voltage drops close to the output voltage, ensuring reliable operation.
Being surface mountable allows for easier and more efficient assembly onto circuit boards, saving space and reducing overall product size.
With a high maximum operating temperature, this regulator can withstand harsh environmental conditions, ensuring performance and reliability in a variety of applications.
The rectangular package shape is space-efficient and allows for easy integration into compact electronic devices.
The gull wing terminal form offers strong mechanical stability and is well-suited for automated assembly processes.
With a low minimum operating temperature, this regulator can function reliably even in extreme cold environments.
The minimum output voltage of 3.2538 V ensures that the regulator can provide a stable voltage output within tight tolerances, meeting the requirements of sensitive electronic components.
The low maximum voltage tolerance ensures that the output voltage remains within a narrow range, providing consistent and reliable performance.
The nominal output voltage of 3.3 V is a common standard voltage level, making this regulator compatible with a wide range of electronic devices.
The 4 terminals provide a secure and stable connection to the circuit, ensuring reliable power delivery.
The small outline package style saves space on the circuit board and is suitable for compact electronic designs.
The fixed adjustability ensures a constant output voltage, eliminating the need for manual adjustments and simplifying the design process.
The 2.3 mm terminal pitch provides adequate spacing for easy soldering and connection to the circuit board.
The fixed positive single output LDO regulator design offers a stable and reliable voltage output for powering various electronic components.
The matte tin terminal finish provides a durable and solderable surface for secure connections.
The dual terminal position allows for flexibility in mounting the regulator onto the circuit board, accommodating different design requirements.
The maximum output voltage of 3.3462 V ensures that the regulator can provide sufficient voltage for powering electronic components without exceeding their maximum ratings.
The low maximum seated height allows for a slim and compact design, suitable for applications where space is limited.
The narrow width of 3.5 mm makes the regulator suitable for compact and space-constrained electronic devices.
The low minimum input voltage of 2.7 V allows the regulator to operate efficiently even with lower input voltages, extending its range of applications.
With a high maximum output current of 1 A, this regulator can provide sufficient power to drive multiple electronic components simultaneously.
The ability to withstand peak reflow temperatures for up to 30 seconds ensures reliable soldering during the assembly process.
The high peak reflow temperature of 260°C allows for efficient and reliable soldering of the regulator onto the circuit board.
The low nominal dropout voltage of 0.19 V minimizes power loss and ensures optimal efficiency in power delivery.
The compact length of 6.5 mm allows for easy integration into small electronic devices without compromising on performance.
The high maximum input voltage of 8 V provides flexibility in powering electronic devices and ensures compatibility with a wide range of input sources.
The maximum absolute input voltage of 8.5 V allows for a margin of safety, protecting the regulator and connected components from potential voltage spikes or surges.
Fixed Regulators - Positive Single Output LDO ADP3338AKCZ-3.3RL7 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Analog Devices
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
ADP3338AKCZ-3.3RL7 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
TPS70933DRVR
TPS70933DRVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable power supply in compact designs. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained electronic devices.
TPS73018DBVR
TPS73018DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs where efficiency and reliability are crucial.
AP2114HA-3.3TRG1
Diodes Incorporated
Diodes Inc.'s AP2114HA-3.3TRG1 is a fixed positive single output LDO regulator with a 3.3V nominal output voltage and 1A max output current. It features a small outline package, matte tin terminal finish, and operates in temperatures ranging from -40 to 150°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MIC5365-3.3YC5-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Moisture Sensitivity Level (MSL): 1;
LM1085IT-3.3/NOPB
LM1085IT-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It features a max dropout voltage of 1.5V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. With a compact package style and through-hole terminal form, it offers precise voltage regulation with low line and load variations for various electronic devices.
LM2936MX-5.0/NOPB
LM2936MX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.05A max output current. It operates b/w -40 to 150°C, has a dropout voltage of 0.2V, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM1117DT-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
TLV70433DBVT
TLV70433DBVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max dropout voltage of 1.1 V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices needing reliable power management. Package style is small outline, low profile, shrink pitch with gull wing terminals for surface mount assembly.
BD30HC0MEFJ-LBH2
ROHM
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LP2954AIS/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LT1763CS8-3.3#TRPBF
Analog Devices
Analog Devices' LT1763CS8-3.3#TRPBF is a fixed positive single output LDO regulator with a 3.3V nominal output voltage and 0.5A max output current. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM2936HVBMA-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
TPS76350DBVTG4
TPS76350DBVTG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.15A. It operates in an input voltage range of 5.5V to 10V, making it suitable for various applications requiring stable power supply within tight voltage tolerances. With a compact package style and low profile design, it is ideal for space-constrained electronic devices where reliable voltage regulation is essential.
AP7381-33Y-13
Diodes Inc.'s AP7381-33Y-13 is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation in a compact SMD package.
REG1117-3.3G4
The Texas Instruments REG1117-3.3G4 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly processes.
LP38693MP-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 4 %;
LM2936HVBMA-3.3/NOPB
REG1117-3.3/2K5G4
The Texas Instruments REG1117-3.3/2K5G4 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS71533DCKRM3
TPS71533DCKRM3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 50mA. It has a small outline package style, surface mount capability, and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1129IST-5#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADP3330ARTZ-5-RL7
ADP3330ARTZ-5-RL7 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.23V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
ADP3338AKCZ-3.3-RL
ADP3338AKCZ-3.3-RL by Analog Devices is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 0.4V max dropout voltage. It is used in applications requiring stable voltage regulation in compact spaces due to its small outline package style and surface mount capability.
ADP3339AKCZ-3.3-R7
ADP3339AKCZ-3.3-R7 by Analog Devices is a fixed positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.48V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery-powered devices.
ADP3338AKCZ-3.3
ADP3338AKCZ-3.3 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
ADP3330ARTZ3.3-RL7
ADP3330ARTZ3.3-RL7 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.23V, suitable for applications requiring stable power supply in compact spaces. It operates within a wide temperature range from -40°C to 125°C, making it ideal for various electronic devices that demand reliable performance under extreme conditions. The package style is small outline, low profile, shrink pitch with surface mount capability, offering flexibility in design and installation processes.
ADP3338AKCZ-5-R7
Analog Devices' ADP3338AKCZ-5-R7 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in need of stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
ADP3338AKCZ-2.5RL7
ADP3338AKCZ-2.5RL7 by Analog Devices is a fixed positive single output LDO regulator with 1A max output current, 2.5V nominal output voltage, and 0.4V max dropout voltage. It is used in applications requiring stable power supply such as consumer electronics and industrial equipment due to its small outline package style and wide operating temperature range from -40°C to 125°C.
ADP3335ARMZ-3.3RL7
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.3 %;
ADP3335ARMZ-3.3-RL
Rochester Electronics
ADP3309ARTZ-3.3-R7
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.2 %;
ADP3339AKCZ-1.8-R7
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 8.5 V; Maximum Voltage Tolerance: 1.9 %;
ADP3339AKCZ-5-R7
ADP3339AKCZ-5-R7 by Analog Devices is a fixed positive single output LDO regulator with a max output current of 1.5 A. It has a nominal output voltage of 5 V and operates in temperatures ranging from -40 to 125 °C. This regulator is commonly used in applications requiring stable voltage regulation, such as power supplies and battery-powered devices.
ADP3338AKC-3.3-RL
Analog Devices' ADP3338AKC-3.3-RL is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
ADP3303ARZ-5
ADP3303ARZ-5 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V. It operates in temperatures ranging from -20°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs where reliable power management is essential.
ADP3339AKCZ-2.5-R7
ADP3339AKCZ-3.3-RL
Analog Devices' ADP3339AKCZ-3.3-RL is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, with surface mount capability for easy integration into electronic devices.
ADP3339AKCZ-3.3-RL7
Analog Devices' ADP3339AKCZ-3.3-RL7 is a fixed positive single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.48V, suitable for applications requiring stable 3.3V supply such as IoT devices or portable electronics due to its compact size and wide operating temperature range from -40°C to 125°C.
ADP3330ARTZ-5-REEL7
ADP3330ARTZ-5-REEL7 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.23V. It has a max output current of 0.2A, making it suitable for applications requiring stable voltage regulation in compact electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved