Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi NC7S14M5 is a CMOS logic gate with Schmitt Trigger feature. It operates at 3V, has 125ns propagation delay, and can handle load capacitance of 50pF. Ideal for industrial applications requiring fast signal processing in compact spaces due to its small outline package and low profile design.
Median Price
$0.306
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$16.852
100+ parts
$16.009
1k+ parts
10k+ parts
-
Rochester
$0.254
$0.226
Verical
$0.283
Nova Conductors
$0.215
Digiode
$0.237
Forefront Electronics and Design
$0.740
American Microsemiconductor Inc.
$0.990
Chip Stock
Prism Electronics
Vyrian
Anansix
Bas Electronics GmbH & Co. KG
Manoshevitz Elec. Sales
Semi Source
Bristol Electronics
Connector Distribution Corp
Right Parts Inc.
North Shore Components
LWI Electronics Inc
Goldney Electronics S.L.
Resion
LIBRA Elektronik GmbH
Sensible Micro Corp
R&J Components
ComSIT Distribution GmbH
ComSIT USA
Tectiva GmbH
Legend Electronics Inc.
ACDS - Activité Composants Distribution Service
Sinequanon
Ampacity Inc.
$0.212
Semicontronic
$0.207
$0.206
Continental Prestige Electronics
$0.211
Argo Parts USA
$0.209
Netroflash
Corphita
$0.224
Corohmni
$0.249
Aztec Data Supply Inc.
$16.155
Advanced Electronics
RC Electronics
$0.130
$0.120
Authorized Procurement Solutions
Perfect Parts
Kulean Microsystems
Problanco Electronics
Assy Fe
SupplyDigital Components
Microchip USA
Supply Digital
TANS Electronics
Futuretech Components
Cyclops Electronics Ltd (Excess)
UHIMA Technologies
This material makes the product durable and resistant to wear and tear, ensuring long-term reliability.
Low propagation delay ensures fast signal processing, making it suitable for high-speed applications.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and reducing assembly time.
Operating at a nominal supply voltage of 3V makes it compatible with a wide range of electronic systems.
Suitable load capacitance ensures stable performance and reliable operation in various circuit configurations.
Having 5 terminals provides flexibility in circuit design and connectivity options for different applications.
High maximum operating temperature allows the product to withstand harsh environmental conditions without performance degradation.
CMOS technology offers low power consumption and high noise immunity, making the product energy-efficient and reliable in noisy environments.
Logic Gates NC7S14M5 attributes and parameters. Explore more Logic Gates devices from Onsemi
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Schmitt Trigger:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NC7S14M5 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-649-8213, 5962016498213
NIIN
016498213
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
74HC00D
NAND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74ACT14M
Ge Solid State
INVERTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Propagation Delay (tpd): 9.5 ns;
M74VHC1GT50DFT1G
M74VHC1GT50DFT1G by Onsemi is a logic gate with 10ns propagation delay, suitable for military applications. It operates at a nominal voltage of 1.8V and can handle load capacitance of 50pF. With a max operating temperature of 125°C, it features a small outline package style for surface mount assembly.
SN74LVC1G0832YZPR
SN74LVC1G0832YZPR by Texas Instruments is a logic gate with 3 inputs and 6 terminals. It has a propagation delay of 5.9 ns at 1.8V, making it suitable for high-speed applications. With a max operating temperature of 85°C, it is ideal for industrial environments requiring fast signal processing.
74LVC1G17GV-Q100,125
NXP Semiconductors' 74LVC1G17GV-Q100,125 is a CMOS Logic Gate with 5 terminals. It operates at supply voltages from 1.65V to 5.5V and has a propagation delay of 14ns. Designed for automotive applications, it meets AEC-Q100 standards and can withstand temperatures ranging from -40°C to 125°C.
74HC132D,653
NXP Semiconductors' 74HC132D,653 is a CMOS Logic Gate with 4 functions and 2 inputs. It operates at a supply voltage range of 2-6V, with a propagation delay of 31ns. Ideal for automotive applications due to its Schmitt Trigger feature and small outline package style.
SN74LVC1G04DCKTE4
SN74LVC1G04DCKTE4 by Texas Instruments is a CMOS logic gate with 3.3V nominal voltage, 4.2ns propagation delay, and 32A max I (ol). Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
SN74AHC1G08DCKRG4
SN74AHC1G08DCKRG4 by Texas Instruments is a CMOS logic gate with 2 inputs, 14ns propagation delay, and 3.3V nominal voltage. It is used in military-grade applications due to its Schmitt Trigger feature and operates within a temperature range of -55°C to 125°C. The package style is small outline with a thin profile, making it suitable for surface mount assembly.
NC7S08M5X
National Semiconductor
AND GATE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN74LS14N
INVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SN74HC00DBR
SN74HC00DBR by Texas Instruments is a CMOS logic gate with 4 functions and 2 inputs. It has a propagation delay of 23 ns at 5V, making it suitable for industrial applications requiring fast response times. With a small outline package and surface mount capability, it is ideal for compact electronic designs.
NC7SZ04M5X_NL
Fairchild Semiconductor
NC7SZ04M5X_NL by Fairchild Semiconductor is a logic gate with 1 input and 1 function. It has a propagation delay of 5.2 ns and operates at a nominal voltage of 1.8V. This small outline, low profile package is commonly used in industrial applications requiring CMOS technology.
74LVC2G14GW/C,125
NXP Semiconductors' 74LVC2G14GW/C,125 is a CMOS Logic Gate with Schmitt Trigger. It operates at 1.8V nominal voltage and has 2 functions. With a propagation delay of 12ns, it's ideal for automotive applications due to its wide temperature range (-40°C to 125°C).
HEF4093BT,653
HEF4093BT,653 by NXP Semiconductors is a CMOS Logic Gates IC with 4 functions and 2 inputs. It has a propagation delay of 185 ns at 5V supply voltage, suitable for industrial applications requiring Schmitt Trigger functionality. The package is small outline with surface mount capability and operates within -40 to 85°C temperature range.
CD4093BM
CD4093BM by Texas Instruments is a CMOS logic gate with 4 functions and 2 inputs. It operates at a supply voltage of 5V, with a propagation delay of 380ns. Suitable for military-grade applications due to its Schmitt Trigger feature and wide operating temperature range from -55°C to 125°C.
74HCT00D,653
74LVC1G14GW
INVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
74LVC1G14GV-Q100,1
INVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SSOP; Package Shape: RECTANGULAR;
74AHC1G08GW,125
NXP Semiconductors' 74AHC1G08GW,125 is a logic gate with 2 inputs and propagation delay of 10.5 ns at 5V. It operates in the temperature range of -40 to 125°C, suitable for automotive applications. The package style is small outline, thin profile, shrink pitch, making it ideal for compact designs.
74HC04D,653
74HC04D,653 by NXP Semiconductors is a logic gate with 6 functions. It has a propagation delay of 26 ns and operates at a nominal voltage of 5V. This small outline package is commonly used in automotive applications due to its temperature grade and compact size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NC7SZ14M5X
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
The Onsemi NC7SZ14M5X is a CMOS logic gate with 7.5 ns propagation delay at 1.8V, suitable for industrial applications. It features Schmitt Trigger technology, operates b/w -40 to 85 °C, and has a max supply voltage of 5.5V. This small outline package with dual terminals is ideal for surface mount designs requiring fast signal processing.
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
NC7SZ08M5X
AND GATE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
The Onsemi NC7SZ08M5X is a CMOS logic gate with 2 inputs, 10.5 ns propagation delay, and 1.8V nominal voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a small outline package with dual terminal position for surface mount assembly.
NC7SZ08P5X
The Onsemi NC7SZ08P5X is a CMOS Logic Gate with 2 inputs, 10.5 ns propagation delay, and 1.8V nominal voltage. Ideal for industrial applications, it features a small outline package with matte tin finish and operates b/w -40 to 85°C temperature range.
NC7SZ04M5X
The Onsemi NC7SZ04M5X is a CMOS logic gate with 5.2ns propagation delay, suitable for industrial applications. Operating at 1.8V to 3.3V, it has a load capacitance of 15pF and can handle up to 24A max I (ol). This small outline package with matte tin finish is ideal for compact electronic designs requiring fast signal processing.
NC7SZ04P5X
The Onsemi NC7SZ04P5X is a CMOS logic gate with 5.2ns propagation delay at 1.8V, suitable for industrial applications. It operates b/w -40 to 85°C, has a load capacitance of 50pF, and can handle up to 24A max I (ol). This small outline package with dual terminals is ideal for compact electronic designs requiring fast signal processing.
The Onsemi NC7S08M5X is a CMOS logic gate with 2 inputs, 35 ns propagation delay, and 125 ns tpd. It operates at a supply voltage range of 2-6V and can handle up to 50 pF load capacitance. Ideal for industrial applications requiring fast signal processing in compact designs.
NC7S14M5X
The Onsemi NC7S14M5X is a CMOS logic gate with Schmitt Trigger technology. It operates at 3V, has a propagation delay of 35ns, and can handle load capacitance of 50pF. Ideal for industrial applications requiring fast signal processing in compact spaces due to its small outline package style.
NC7SZ58P6X
NC7SZ58P6X by Onsemi is a logic gate with 2 inputs, 8.5 ns propagation delay, and 50 pF load capacitance. It operates at a supply voltage of 3.3V and can handle a max power supply current of 50mA. Ideal for industrial applications requiring fast signal processing in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved