Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LCM5125 by Onsemi is a 182x34x13 mm display with 40 characters per row, 7.96mm height, and 16mm viewing area. It operates b/w 0-40 °C, with a nominal voltage of 5V. Ideal for applications requiring compact displays with clear visibility and low power consumption.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Kulean Microsystems
Corohmni
Corphita
Slim and compact design, takes up minimal space on desk or mounting surface.
Can withstand high temperatures, ensuring durability and reliability in various environments.
Low profile design, fits well in small spaces and offers a sleek look.
Can operate in colder environments without any issues, suitable for a wide range of applications.
Ability to display more characters per row, providing detailed information at a glance.
Low power consumption and compatibility with standard electrical systems.
Clear and easy-to-read characters, enhancing visibility and readability.
Sufficient height for displaying information prominently, improves visibility from a distance.
Optimal size for displaying content without being too large, suitable for various applications.
Adequate height for viewing content comfortably, offers a good balance between size and visibility.
Displays & Monitors LCM5125 attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Character Font Type:
Characters Per Row:
Display Height:
Maximum Operating Temperature:
Minimum Operating Temperature:
Depth:
Height:
Length:
Rows Per Display:
Sub-Category:
Nominal Supply Voltage:
Viewing Area Height:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Diodes Incorporated
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Transys Electronics
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
Vicor
LCM5448-22NAK
The Onsemi LCM5448-22NAK display features 640x400 resolution, blue color at 5V supply voltage. With dimensions of 324x190x19 mm, it's ideal for applications requiring a compact and high-quality display solution in the temperature range of 5-40 °C.
LT084AC27500
Toshiba
Displays; Height: 149.5 mm; Maximum Operating Temperature: 70 Cel; Pixel Count (Vertical): 600 Pixel; Nominal Supply Voltage: 3.3 V; Depth: 13 mm;
LTA084C272F
Displays; Viewing Area Height: 128 mm; Length: 199.5 mm; Horizontal Pixel Count: 800 Pixel; Maximum Operating Temperature: 70 Cel; Nominal Supply Voltage: 3.3 V;
NHD-C12864A1Z-FSW-FBW-HTT
Newhaven Display International
GRAPHIC DOT MATRIX LCD DISPLAY;
LTM170E5-L03
Samsung
Displays; Height: 306.5 mm; Minimum Operating Temperature: 0 Cel; Depth: 22.8 mm; Maximum Operating Temperature: 50 Cel; Viewing Area Length: 337 mm;
DM1620-7JL7
The Onsemi DM1620-7JL7 display has 2 rows with 16 characters each in a 5x8 Dot font type. With a height of 33mm and depth of 13mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility such as industrial control panels or consumer electronics.
LT104S1101
Displays; Minimum Operating Temperature: 10 Cel; Viewing Area Height: 158 mm; Horizontal Pixel Count: 800 Pixel; Maximum Operating Temperature: 45 Cel; Viewing Area Length: 211 mm;
NL3224CR24-03
Renesas Electronics
Displays; Horizontal Pixel Count: 320 Pixel; Nominal Supply Voltage: 3.3 V; Height: 71 mm; Depth: 2 mm; Length: 87 mm;
LTM12C275A
Displays; Height: 220 mm; Maximum Operating Temperature: 50 Cel; Viewing Area Length: 246 mm; Horizontal Pixel Count: 800 Pixel; Pixel Count (Vertical): 600 Pixel;
LCM5019
LCM5019 by Onsemi is a 5V display with 24 characters per row, featuring a character font type of 5x10 + CSR. With dimensions of 118mm x 36mm x 13mm, it operates b/w temperatures of 0 °C to 50°C. Ideal for applications requiring compact displays with clear visibility and easy integration.
LTM08C351S
Displays; Maximum Operating Temperature: 60 Cel; Depth: 12 mm; Color At Wavelength: White; Pixel Count (Vertical): 600 Pixel; Height: 149.5 mm;
ALM0305
ALM0305 by Onsemi is a 470x236 pixel display with 63x46 mm viewing area. At just 5mm depth, it operates b/w 5-40 °C. Ideal for applications requiring dark on light color at 100x90 mm size.
LQ121S1LG61
Sharp Corporation
Sharp Corporation's LQ121S1LG61 display offers 800x600 resolution, 11mm depth, and operates b/w -30 to 80°C. Ideal for industrial applications requiring a compact 276x209 mm screen with a nominal voltage of 5V.
CU20025-UW1J
Noritake Itron
Displays;
M204SD08AA
Futaba Electric
Futaba Electric's M204SD08AA is a DOT MATRIX VFD module with 20x4 display format, 5V supply voltage, and 20 characters per row. At 100mm length, it features a compact design ideal for industrial control panels and instrumentation applications. With a character font type of 5x7 + CSR, this module offers clear and concise information display in a variety of settings.
LTD104C11S
Displays; Horizontal Pixel Count: 640 Pixel; Height: 177.5 mm; Nominal Supply Voltage: 5 V; Length: 238.5 mm; Depth: 12 mm;
DM1620-7BL3
The Onsemi DM1620-7BL3 display has 2 rows with 16 characters each in a 5x8 Dot font type. With a height of 33mm and depth of 13mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility like industrial control panels.
NL128102AC31-02A
Displays; Height: 382 mm; Pixel Count (Vertical): 1024 Pixel; Viewing Area Height: 319 mm; Length: 470 mm; Minimum Operating Temperature: 0 Cel;
NL10276AC28-01E
Displays; Pixel Count (Vertical): 768 Pixel; Horizontal Pixel Count: 1024 Pixel; Height: 255 mm; Depth: 19 mm; Viewing Area Height: 214 mm;
DM1620-1JL3
The Onsemi DM1620-1JL3 display has 2 rows with 16 characters each in a 5x8 Dot font type. With a height of 33mm and depth of 13mm, it operates b/w 0-50 °C. Ideal for applications requiring compact displays with clear visibility like industrial control panels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LCM5113
Displays; Display Height: 4.51 mm; Nominal Supply Voltage: 5 V; Viewing Area Height: 16 mm; Length: 85 mm; Characters Per Row: 16;
LCM5067
Displays; Viewing Area Height: 14 mm; Maximum Operating Temperature: 50 Cel; Characters Per Row: 16; Minimum Operating Temperature: 0 Cel; Nominal Supply Voltage: 5 V;
LCM5020
Displays; Nominal Supply Voltage: 5 V; Characters Per Row: 40; Rows Per Display: 1; Character Font Type: 5x10 + CSR; Display Height: 7.96 mm;
LCM5111
Displays; Height: 44 mm; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 40 Cel; Depth: 15 mm; Character Font Type: 5x7 + CSR;
LCM5103
Displays; Rows Per Display: 1; Display Height: 5.77 mm; Nominal Supply Voltage: 5 V; Length: 80 mm; Characters Per Row: 16;
LCM5058
Displays; Nominal Supply Voltage: 5 V; Depth: 9 mm; Maximum Operating Temperature: 50 Cel; Display Height: 3.8 mm; Character Font Type: 5x7 + CSR;
LCM5114
Displays; Characters Per Row: 16; Depth: 14 mm; Height: 60 mm; Minimum Operating Temperature: 0 Cel; Length: 87 mm;
LCM5007
Displays; Characters Per Row: 16; Character Font Type: 5x7 + CSR; Rows Per Display: 1; Maximum Operating Temperature: 50 Cel; Nominal Supply Voltage: 5 V;
LCM5101
Displays; Maximum Operating Temperature: 40 Cel; Viewing Area Height: 15 mm; Length: 58 mm; Height: 32 mm; Display Height: 4.51 mm;
LCM5022
Displays; Nominal Supply Voltage: 5 V; Characters Per Row: 16; Length: 85 mm; Depth: 12 mm; Maximum Operating Temperature: 50 Cel;
LCM5110
Displays; Maximum Operating Temperature: 40 Cel; Depth: 12 mm; Length: 85 mm; Rows Per Display: 1; Height: 36 mm;
LCM5104
Displays; Viewing Area Height: 16 mm; Character Font Type: 5x7 + CSR; Display Height: 5.55 mm; Depth: 14 mm; Minimum Operating Temperature: 0 Cel;
LCM5024
Displays; Maximum Operating Temperature: 50 Cel; Depth: 13 mm; Nominal Supply Voltage: 5 V; Characters Per Row: 40; Length: 182 mm;
LCM5112
Displays; Characters Per Row: 16; Minimum Operating Temperature: 0 Cel; Height: 36 mm; Length: 85 mm; Nominal Supply Voltage: 5 V;
Displays; Length: 118 mm; Display Height: 7.96 mm; Character Font Type: 5x10 + CSR; Height: 36 mm; Rows Per Display: 1;
LCM5059
Displays; Character Font Type: 5x7 + CSR; Viewing Area Height: 26 mm; Display Height: 4.15 mm; Rows Per Display: 4; Depth: 10 mm;
LCM5003
Displays; Minimum Operating Temperature: 0 Cel; Characters Per Row: 16; Length: 87 mm; Display Height: 4.15 mm; Height: 60 mm;
LCM5017
Displays; Depth: 12 mm; Height: 36 mm; Viewing Area Height: 16 mm; Maximum Operating Temperature: 50 Cel; Character Font Type: 5x10 + CSR;
LCM5023
Displays; Nominal Supply Voltage: 5 V; Rows Per Display: 2; Characters Per Row: 24; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;
LCM5109
Displays; Height: 36 mm; Display Height: 7.96 mm; Character Font Type: 5x10 + CSR; Characters Per Row: 16; Depth: 12 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved