Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi HCPL0731 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.02A and min CTR of 400%. Ideal for logic IC output applications, it offers high isolation voltage of 2500V and operates b/w -40 to 85°C.
Median Price
$3.100
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Farnell
1+ parts
$2.590
100+ parts
$1.350
1k+ parts
$1.200
10k+ parts
-
RS (Exports)
$3.050
$1.563
$1.284
Chip1Stop
$3.150
$1.220
$1.160
$1.150
Newark
$3.250
$1.790
$1.430
Mouser Electronics
$7.590
$4.610
$3.900
DigiKey
$7.700
$4.733
$4.100
$3.969
Arrow
$1.175
Verical
Digiode
$1.682
Nova Conductors
$3.710
Freelance Electronics
$4.329
Chip Stock
Vyrian
IBS Electronics
$2.300
$1.865
$1.711
Resion
Flip Electronics
J2 Sourcing AB
PC Components Company LLC
ACDS - Activité Composants Distribution Service
Dan-Mar Components
EPE Components Inc.
Vicor Industries, Inc.
Bristol Electronics
Prism Electronics
LWI Electronics Inc
ComSIT Distribution GmbH
ComSIT USA
North Shore Components
Fibra_Brandt Electronic GMBH
J & M Industries LLC
Beltway Electronics Company
Mentor Electronics Marketing, LLC
Semtec, LLC
A2Z Electronics, Inc.
Mil-Aero Solutions, Inc.
Semi Source
Contempo Components LLC
EMSNET
Aztec Data Supply Inc.
$0.068
Ampacity Inc.
$1.000
Semicontronic
$0.975
$0.970
Decca Corp
$0.980
Continental Prestige Electronics
$1.401
Argo Parts USA
Corphita
$1.593
Component Stockers USA
$2.130
$1.580
$1.240
Aranea Global
$3.636
$3.490
Corohmni
$3.682
Advanced Electronics
$3.792
$3.603
Andel Nordic
$10.379
$9.964
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Problanco Electronics
Metaverse IC Inc.
Kulean Microsystems
Perfect Parts
Supply Digital
TANS Electronics
SupplyDigital Components
Glotronic Ltd.
Kepictronics
UHIMA Technologies
Infinite Electronics LLP (Excess)
Standard Data Resources (Excess)
This configuration allows for independent operation of two channels, providing flexibility and versatility in circuit design.
With two functions in one component, this optocoupler circuit outputs offer increased functionality in a compact package.
The high maximum forward current rating makes this product suitable for applications requiring a reliable power output.
This type of optocoupler is ideal for interfacing logic signals between different voltage levels, ensuring reliable signal transmission.
With a high maximum operating temperature, this product can withstand elevated temperatures, making it suitable for various environments.
The low minimum operating temperature ensures reliable performance even in cold conditions, enhancing the product's versatility.
The matte tin terminal finish provides excellent solderability and corrosion resistance, ensuring a durable connection.
The high maximum power dissipation rating allows the product to handle heat dissipation effectively, ensuring reliability under load.
With a minimum current transfer ratio of 400%, this optocoupler circuit outputs ensure accurate signal transmission with minimal loss.
Having two elements in one package simplifies circuit design and saves board space, making this product a cost-effective solution.
The high isolation voltage rating ensures safe signal isolation and protection against voltage spikes, making this product suitable for high-voltage applications.
The surface mounting feature simplifies the assembly process and saves space on the PCB, making this product easy to integrate into compact designs.
The low maximum forward voltage drop minimizes power consumption and heat generation, reducing energy costs and improving efficiency.
The high maximum on-state current rating allows for reliable switching of high-current loads, making this product suitable for power control applications.
Optocoupler Circuit Outputs HCPL0731 attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Minimum Current Transfer Ratio:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
HCPL0731 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Digitron Semiconductors
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
Mde Semiconductor
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
HCPL-0201#560
Broadcom
Broadcom's HCPL-0201#560 is a single optocoupler with max forward current of 0.01A, isolation voltage of 3750V, and data rate of 5MBps. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a min supply voltage of 4.5V.
TLP250F
Toshiba
Toshiba's TLP250F is a single optocoupler with max. forward current of 0.005A, isolation voltage of 2500V, and on-state current up to 1.5A. Ideal for logic IC output applications requiring min supply voltage of 10V for safe electrical isolation.
6N137
Vishay Intertechnology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; No. of Elements: 1; Maximum Forward Current: .015 A;
H11L1
Intersil
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .25 W; Maximum Forward Current: .06 A; No. of Elements: 1;
HCPL2631SDM
HCPL2631SDM by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05A and an isolation voltage of 5000V, making it suitable for logic IC output applications. With a response time of 40ns and data rate of 10MBps, this rectangular-shaped device operates b/w -40 to 100°C, ideal for surface mount installations.
HCPL2630SDVM
HCPL2630SDVM by Onsemi is a 2-channel optocoupler with max forward current of 0.05A and isolation voltage of 5000V. Ideal for logic IC output applications, it offers fast response time of 40ns and data rate of 10MBps. With surface mounting feature, it operates b/w -40 to 100°C efficiently.
6N136S
The Onsemi 6N136S is a single optocoupler with a max forward current of 0.025A and isolation voltage of 2500V. It has a nominal response time of 450ns, making it ideal for logic IC output applications. With a data rate of 1MBps, this rectangular-shaped optocoupler operates b/w 0 to 70°C temperature range.
6N137M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; No. of Elements: 1;
OPI1268
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .025 A; Maximum Isolation Voltage: 16000 V;
HCPL-0731-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Maximum Power Dissipation: .2 W; No. of Elements: 2;
HCPL2531TVM
HCPL2531TVM by Onsemi is a 2-channel optocoupler with max. forward current of 0.025A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w 0-70°C, has a data rate of 1MBps, and features matte tin terminal finish.
FODM452R2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum Operating Temperature: 85 Cel; Minimum Current Transfer Ratio: 15 %;
H11L1SR2M
H11L1SR2M by Onsemi is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. Ideal for logic IC output applications due to its surface mount feature, 1 MBps data rate, and hysteresis ratio of 0.75.
HCPL-060L-500E
HCPL-060L-500E by Broadcom is a single optocoupler circuit output with a max forward current of 0.02 A. It has a nominal data rate of 15 MBps and can be used in logic IC output applications.
HCPL3700SD
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 2 V; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 85 Cel; Configuration: COMPLEX;
HCPL-2731
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Nominal Data Rate: .1 MBps;
HCPL2630SV
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS;
TLP109(E(T
Toshiba's TLP109(E(T optocoupler features a max forward current of 0.02A, isolation voltage of 3750V, and operating temperature range from -55 to 125°C. Ideal for logic IC output applications requiring high isolation and low on-state current.
HCPL-3700-300E
The Broadcom HCPL-3700-300E is a single optocoupler with logic IC output, featuring a max forward current of 0.05A and isolation voltage of 3750V. It operates b/w 0 to 70°C, suitable for surface mount applications in electronics requiring high voltage protection and signal isolation.
6N136M-V
Lite-on Technology
6N136M-V by Lite-on Technology is a single optocoupler with a max forward current of 0.025A and isolation voltage of 2500V. It operates b/w -55°C to 100°C, making it suitable for logic IC output applications requiring high isolation and low on-state current of 0.008A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-316J-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 100 ns; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
HCPL2630S
HCPL2630S by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A, operating temperature range of -40 to 85°C, and isolation voltage of 2500V. Ideal for logic IC output applications requiring fast response time at 10MBps data rate.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED; Maximum Power Dissipation: .06 W; Configuration: SEPARATE, 2 CHANNELS; Nominal Supply Voltage: 5 V;
HCPL-2630.S
Qt Optoelectronics
HCPL-2630.S by Qt Optoelectronics is a 2-channel logic IC output optocoupler with separate configuration. It features max. forward current of 0.03A, isolation voltage of 2500V, and data rate of 10MBps. Ideal for applications requiring high-speed signal transmission in environments ranging from -40°C to 85°C.
HCPL-316J-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Nominal Response Time: 500 ns; Nominal Supply Voltage: 30 V; Minimum Operating Temperature: -40 Cel;
HCPL-2631.SD
HCPL-2631.SD by Qt Optoelectronics is a 2-channel optocoupler with max. forward current of 0.03A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to 85°C with a nominal data rate of 10MBps.
HCPL2631SD
HCPL2631SD by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.03A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Configuration: SEPARATE, 2 CHANNELS; Minimum Supply Voltage: 4.5 V; No. of Elements: 2;
HCPL2601V
HCPL2601V by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates b/w -40 to 85°C, has a response time of 75ns, and is ideal for logic IC output applications.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 2500 V;
HCPL2630SV by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A and operates at temperatures b/w -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 2500V and data rate of 10MBps in a surface mount package.
HCPL-0600-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .05 A;
Broadcom's HCPL-0600-500E is a single optocoupler with logic IC output. It has a max forward current of 0.02A, isolation voltage of 3750V, and response time of 100ns. Ideal for applications requiring high-speed data transmission in environments with temperatures ranging from -40 to 85°C.
HCPL-2601S
Fairchild Semiconductor's HCPL-2601S is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and data rate of 10MBps. It is ideal for logic IC output applications, operating b/w -40°C to 85°C with a min. supply voltage of 4.5V.
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
HCPL-2601.S
HCPL-2601.S by Qt Optoelectronics is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. With a data rate of 10MBps, it is ideal for logic IC output applications requiring reliable signal transmission in temperatures ranging from -40°C to 85°C.
HCPL-0201-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 20 V; Nominal Response Time: 300 ns; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .01 A;
Broadcom's HCPL-0201-500E is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. With a data rate of 5MBps, it operates b/w -40 to 85°C, making it ideal for logic IC output applications requiring high-speed signal transmission in harsh environments.
HCPL0600R2
The Onsemi HCPL0600R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 50ns, and is ideal for logic IC output applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved