Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel;
Median Price
$2.690
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Farnell
1+ parts
$1.940
100+ parts
$0.951
1k+ parts
$0.723
10k+ parts
-
Newark
$1.490
$1.150
$1.070
Mouser Electronics
$2.740
$1.520
$1.180
$1.090
DigiKey
$2.750
$1.537
$1.338
Element14
$3.750
$2.110
$1.840
EBV Elektronik
Avnet
$0.875
RS (Exports)
$0.958
EXC GmbH
$0.512
Maritex
$1.119
$0.632
$0.541
$0.492
Nova Conductors
$1.207
Digiode
$2.204
TME
$2.590
$1.480
$0.990
$0.950
NAC Semi
$0.840
Vyrian
Cyclops Electronics Ltd
Chip Stock
Schukat
$0.828
$0.697
ComSIT USA
Elcom Components
LIBRA Elektronik GmbH
SOS electronic
$0.677
$0.647
ComSIT Distribution GmbH
Sensible Micro Corp
Micros
$0.965
Partservice
$0.880
$0.739
Bristol Electronics
Pegasus Components GmbH
Holdelec - ElecDif-Pro
Sea View Technologies
HZD GmbH
Atlantic Semiconductor
Tectiva GmbH
Micros sp.j. W. Kędra i J. Lic
$0.868
$0.839
ACDS - Activité Composants Distribution Service
Martec Srl
Inventory MP
Prism Electronics
EMSNET
LWI Electronics Inc
Corohmni
$0.148
Aztec Data Supply Inc.
$0.190
Advanced Electronics
$0.440
$0.400
$0.361
Semicontronic
$0.710
$0.692
$0.689
Argo Parts USA
$1.201
Modulus Dynamics
$1.333
$1.320
$1.280
Decca Corp
$1.540
$1.509
$1.494
Corphita
$2.088
Eastek
Perfect Parts
Metaverse IC Inc.
GreenTree Electronics
RC Electronics
$1.300
GlobX GmbH
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Allen Electronics Distributors
$0.810
Authorized Procurement Solutions
Glotronic Ltd.
Alle Elektronik GmbH
Kepictronics
Futuretech Components
S.R.D Solutions
Supply Digital
iodParts Technologies Inc.
Netroflash
$1.182
$1.146
$1.122
Cyclops Electronics Ltd (Excess)
Robosynatics
$3.410
Lucentia Tech
Continental Prestige Electronics
$1.260
Assy Fe
Optocoupler Circuit Outputs HCPL-0601-500E attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Agilent Technologies
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Nominal Response Time:
Sub-Category:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
HCPL-0601-500E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Device Design Changes 10/Nov/2015 Molding Chg 08/Feb/2016
PCN Packaging - Multiple Devices Marking/Labeling 07/Aug/2013 Marking/Labeling Revision B 14/Jan/2014
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
1N4148W-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
6N139SVM
6N139SVM by Onsemi is a single optocoupler circuit output with a max forward current of 0.02 A. It is commonly used in logic IC output applications and can operate at temperatures ranging from -40 to 100 °C.
6N138
Toshiba
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: .1 MBps; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Configuration: SINGLE; Additional Features: UL RECOGNIZED, CMOS COMPATIBLE;
HCPL2731V
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SEPARATE, 2 CHANNELS; JESD-609 Code: e3; No. of Elements: 2; Maximum On State Current: .06 A;
HCPL-063A
Broadcom
Broadcom's HCPL-063A is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.01 A and an isolation voltage of 3750 V, making it ideal for logic IC output applications. With a nominal data rate of 10 MBps and surface mounting feature, this device operates efficiently at temperatures ranging from -40 to 85°C.
6N136SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Additional Features: TTL COMPATIBLE, UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
6N139
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .012 A; Maximum On State Current: .06 A; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; JESD-609 Code: e0;
6N136S
The Onsemi 6N136S is a single optocoupler with a max forward current of 0.025A and isolation voltage of 2500V. It has a nominal response time of 450ns, making it ideal for logic IC output applications. With a data rate of 1MBps, this rectangular-shaped optocoupler operates b/w 0 to 70°C temperature range.
6N136
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .0000008 s; Nominal Response Time: 30 ns; Nominal Data Rate: 1 MBps; Shape: RECTANGULAR;
HCPL-2232-300E
Broadcom's HCPL-2232-300E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.01A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers high isolation voltage of 3750V and fast response time of 300ns.
HCPL-0601-060E
Broadcom's HCPL-0601-060E is a single optocoupler with 0.02A forward current, ideal for logic IC outputs. It operates b/w -40 to 85°C, offers 3750V isolation voltage, and has a data rate of 10MBps. Suitable for surface mount applications in various electronic circuits.
HCPL-2300-500E
Broadcom's HCPL-2300-500E is a SINGLE optocoupler with 3750V isolation voltage, 5MBps data rate, and 0.025A max on-state current. Ideal for logic IC output applications, it operates b/w -40 to 85 °C and has a response time of 200ns. Suitable for surface mounting with matte tin finish.
5962-8947701PA
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb) - hot dipped; Maximum Forward Current: .015 A; Nominal Response Time: 10000 ns; No. of Functions: 1;
H11L1SR2VM
H11L1SR2VM by Onsemi is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, suitable for logic IC output applications at up to 1MBps data rate.
HCPL0701
The Onsemi HCPL0701 is a single optocoupler with logic IC output. It features a max forward current of 0.02A, min CTR of 400%, and isolation voltage of 2500V. Ideal for surface mount applications in temperature-sensitive environments like industrial automation and power management systems.
HCPL-0600#500
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: 10 MBps; Minimum Supply Voltage: 4.5 V; Configuration: COMPLEX; Maximum Forward Current: .02 A; No. of Elements: 1;
6N136-V
Lite-on Technology
Lite-on Technology's 6N136-V is a single optocoupler with max forward current of 0.025A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -55°C to 100°C with max on-state current of 0.008A.
HCNW3120#300
HCNW3120#300 by Hewlett Packard is a COMPLEX optocoupler with 0.025A forward current, 5000V isolation voltage, and logic IC output. Ideal for applications requiring high voltage protection and signal transmission in environments ranging from -40°C to 100°C.
HCPL2630S
HCPL2630S by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A, operating temperature range of -40 to 85°C, and isolation voltage of 2500V. Ideal for logic IC output applications requiring fast response time at 10MBps data rate.
H11L1M
H11L1M by Onsemi is a single optocoupler with a max forward current of 0.06 A and an isolation voltage of 7500 V. It operates b/w -40 to 85 °C, making it suitable for logic IC output applications requiring high isolation and low power dissipation. With a nominal data rate of 1 MBps, it offers reliable performance in through-hole mounting configurations.
Everlight Electronics
TRANSISTOR OUTPUT; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .00009 s; Maximum Forward Current: .02 A; No. of Functions: 1; Additional Features: UL APPROVED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-316J-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 100 ns; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED; Maximum Power Dissipation: .06 W; Configuration: SEPARATE, 2 CHANNELS; Nominal Supply Voltage: 5 V;
HCPL-2630.S
Qt Optoelectronics
HCPL-2630.S by Qt Optoelectronics is a 2-channel logic IC output optocoupler with separate configuration. It features max. forward current of 0.03A, isolation voltage of 2500V, and data rate of 10MBps. Ideal for applications requiring high-speed signal transmission in environments ranging from -40°C to 85°C.
HCPL-316J-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Nominal Response Time: 500 ns; Nominal Supply Voltage: 30 V; Minimum Operating Temperature: -40 Cel;
HCPL-2631.SD
HCPL-2631.SD by Qt Optoelectronics is a 2-channel optocoupler with max. forward current of 0.03A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to 85°C with a nominal data rate of 10MBps.
HCPL2631SD
HCPL2631SD by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.03A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Configuration: SEPARATE, 2 CHANNELS; Minimum Supply Voltage: 4.5 V; No. of Elements: 2;
HCPL2601V
HCPL2601V by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates b/w -40 to 85°C, has a response time of 75ns, and is ideal for logic IC output applications.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 2500 V;
HCPL2630SV
HCPL2630SV by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A and operates at temperatures b/w -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 2500V and data rate of 10MBps in a surface mount package.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS;
HCPL-0600-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .05 A;
Broadcom's HCPL-0600-500E is a single optocoupler with logic IC output. It has a max forward current of 0.02A, isolation voltage of 3750V, and response time of 100ns. Ideal for applications requiring high-speed data transmission in environments with temperatures ranging from -40 to 85°C.
HCPL-2601S
Fairchild Semiconductor's HCPL-2601S is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and data rate of 10MBps. It is ideal for logic IC output applications, operating b/w -40°C to 85°C with a min. supply voltage of 4.5V.
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
HCPL-2601.S
HCPL-2601.S by Qt Optoelectronics is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. With a data rate of 10MBps, it is ideal for logic IC output applications requiring reliable signal transmission in temperatures ranging from -40°C to 85°C.
HCPL-0201-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 20 V; Nominal Response Time: 300 ns; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .01 A;
Broadcom's HCPL-0201-500E is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. With a data rate of 5MBps, it operates b/w -40 to 85°C, making it ideal for logic IC output applications requiring high-speed signal transmission in harsh environments.
HCPL0600R2
The Onsemi HCPL0600R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 50ns, and is ideal for logic IC output applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved