Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FNA41060B2 by Onsemi is a Motion Control IC with 26 terminals, operating at 15V. It features a max output current of 20A and supports AC motor control applications. The package style is flange mount with matte tin terminal finish, suitable for dual terminal position requirements.
Median Price
$11.048
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$9.820
1k+ parts
$8.790
10k+ parts
$8.270
Verical
$12.275
$10.988
$10.338
Vyrian
Digiode
Chip Stock
Flip Electronics
Bristol Electronics
Dan-Mar Components
Semtec, LLC
ACDS - Activité Composants Distribution Service
Native Components
$8.209
Northwest PG Solutions
$9.030
$8.127
Ampacity Inc.
$9.300
Microchip USA
$44.100
Problanco Electronics
TANS Electronics
A-Z Elektronik GmbH
Kepictronics
Kulean Microsystems
Alle Elektronik GmbH
Supply Digital
UHIMA Technologies
Corphita
Perfect Parts
SupplyDigital Components
GreenTree Electronics
Corohmni
Rectangular package shape allows for efficient placement on PCBs and easy integration into existing systems.
Operates at a common and stable supply voltage, making it compatible with various power sources and applications.
Provides flexibility in connecting to external components and peripherals, allowing for versatile control options.
Matte tin finish offers good solderability and conductivity, ensuring reliable connections for long-term use.
Being an AC motor controller specific IC, it is designed to efficiently drive and control AC motors, leading to optimized motor performance.
Capable of delivering high output current, making it suitable for driving powerful motors and handling heavy loads.
Motion Control ICs FNA41060B2 attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
FNA41060B2 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Panjit International
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Sensitron Semiconductor
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
FSBB20CH60F
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; No. of Functions: 1;
DRV8320RSRHAT
Texas Instruments DRV8320RSRHAT is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A, temp range -40 to 125°C, and compact square package design.
A3959SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3959SLPTR-T is a Motion Control IC with 28 terminals, operating voltage of 5V, and max output current of 6A. Ideal for stepper motor control applications due to its small outline package and NMOS technology. Operating temperature ranges from -20°C to 85°C.
MPQ6531GV-AEC1-Z
Monolithic Power Systems
MPQ6531GV-AEC1-Z by Monolithic Power Systems is a Motion Control IC with AEC-Q100 screening. It operates at 5-60V, ideal for Brushless DC Motor control applications. This chip carrier has 28 terminals, measures 5x4mm in size, and is suitable for surface mount assembly.
IRMCK341TY
International Rectifier
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES;
VNH3SP30-E
VNH3SP30-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating at 9-36 V. It features a max output current of 30 A and supports brush DC motor control applications. The package style is small outline with gull wing terminals, making it suitable for surface mount designs in various electronic systems.
A3946KLPTR-T
Allegro MicroSystems' A3946KLPTR-T is a Motion Control IC with 16 terminals, operating voltage range of 7-60V, and temperature range from -40 to 135°C. Ideal for automotive applications, this BCDMOS technology-based IC is designed as a Brushless DC Motor Controller in a small outline package with matte tin finish.
DRV8212DSGR
DRV8212DSGR by Texas Instruments is a Motion Control IC with 8 terminals, operating voltage range of 1.65V to 5.5V, and max output current of 4A. This small outline IC is ideal for automotive applications due to its wide temperature range (-40°C to 125°C) and dual terminal position design. With surface mount capability and compact dimensions (2mm x 2mm), it offers efficient brush DC motor control in various automotive systems.
IRMCK311TY
Infineon Technologies
The Infineon IRMCK311TY is a Motion Control IC with 64 terminals in a square flatpack package. It operates b/w -40°C to 85°C, suitable for industrial applications. With power supplies of 1.8V and 3.3V, it utilizes CMOS technology for precise motion control systems.
TMC2300-LA
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Width (mm): 3 mm;
L6208PD013TR
STMicroelectronics L6208PD013TR is a Motion Control IC with 36 terminals, operating voltage of 48V, and output current up to 5.6A. Ideal for automotive applications, it features BCDMOS technology, peak reflow temp of 245°C, and small outline package style.
FSBB15CH60C
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 15 A; Terminal Position: DUAL;
FNB41560B2
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Output Current: 22 A;
A3967SLBTR
Allegro MicroSystems' A3967SLBTR is a Motion Control IC with 24 terminals, operating voltage of 3-5V, and max output current of 0.85A. Ideal for stepper motor control applications due to its compact size, dual terminal position, and tin lead finish.
LA6584M-TLM-H
Onsemi
LA6584M-TLM-H by Onsemi is a motion control IC with 16 terminals, operating voltage of 2.8-12V, and max output current of 1.6A. Ideal for brushless DC motor control applications due to its small outline package and temp range of -30 to 90°C.
FNA41560B2
FNA41560B2 by Onsemi is a Motion Control IC with 26 terminals and a nominal voltage of 15V. It features a max output current of 30A, making it ideal for AC motor control applications. With a package style of MICROELECTRONIC ASSEMBLY and terminal finish of Matte Tin (Sn), this IC has a compact design suitable for various motion control systems.
SLA7076MPRT
Sanken Electric
STEPPER MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LV8413GP-TE-L-H
LV8413GP-TE-L-H by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -20 to 85°C, with 3.3/5V supplies and BICMOS technology. Ideal for motion control applications requiring low supply current and high peak reflow temperatures.
DRV8353FSRTAR
DRV8353FSRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating at -40 to 125 °C. It features a max supply voltage of 100 V and output current of 1 A, suitable for automotive applications as a Brushless DC Motor Controller in compact square chip carrier package.
SA12
Apex Microtechnology
BRUSH DC MOTOR CONTROLLER; Temperature Grade: MILITARY; No. of Terminals: 12; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFAQ1060L33T
NFAQ1060L33T by Onsemi is a Motion Control IC with 24 terminals, operating voltage range of 14-16.5V, and max output current of 20A. Ideal for AC motor control applications in automotive systems due to its hybrid technology and temp range of -40 to 125°C.
FNA41560T2
FNA41560T2 by Onsemi is a motion control IC with 1 function. It has a nominal voltage of 15V and can handle a max output current of 30A. This IC, with its automotive temperature grade, is suitable for AC motor control applications.
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL; JESD-30 Code: R-XDMA-T26;
FNA40560
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-609 Code: e3; Power Supplies (V): 15;
FNA40860
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V; Terminal Finish: TIN;
FNA40860B2
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Width (mm): 23 mm; Length: 39 mm;
FNA41060
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Peak Reflow Temperature (C): NOT SPECIFIED; Package Body Material: UNSPECIFIED;
FNA41560
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 13.5 V; Nominal Supply Voltage (Vsup): 15 V;
FNA41060B2
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XDFM-T26;
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified; Terminal Form: THROUGH-HOLE;
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V; Minimum Supply Voltage (Vsup): 13.5 V;
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL; Maximum Supply Current (Isup): 3.65 mA;
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1; Length: 39 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved